Видео

Not a problem if you converted to propane. Good to know though.

I bought a new one that was damaged at harbor freight for $500. All i had to do was take off a black vent a beat it straight which took all but 10 min

Ok your a damn rock star man thank you for this tip I used my camera to get the audio feed back you did and found it in seconds thank you so much for this video

On the large sleds the throttle switch is at the pivot point of the throttle handle and must switch before the throttle body or carb switch is active ( ie the throttle must be what is commanding the sled). There is no carb switch on the ZR200 - so how does this work?

Can anybody say the minimum distance to move outward the right rear wheel to remove the 720 pulley

Love the classics

Nice job! Thanks. I’ll be doing that soon on my 1951 model B. I need to finish getting it running- starter isues. Napa has a very good version of the oil filter.

The oil filter O ring is supplied with the oil filter.

Why do some videos say "battery to field" to polorize?

I got a 730 that going up a hill the clutch will disengage unless I hold the lever forward, and even then, it may slip a little. It may just need tightening, I haven't looked at the friction discs yet. Is there something I should look for to know if the friction discs need replacing? (measure thickness or something else? )

Excellent video. Where did you get the parts? Any chance you could bromide a link.

My predator 9000 has a black wire hanging over pull starter

Great tip!

Thanks for posting

The little kid smiling. He knows a good brand

In 1979. . .

Using old traitors and equipment. I drove and used this. When I graduated from high school.

A lot of hippies are out planting maragejauna. And even tree's

Careful with this basket rake.

Love the two cylinder JDs....build back before they intentionally started screwing farmers. The fact that they're 60+ years old and STILL working are testament to their quality and rugged reliability

Love that sound

thanks, helped me a lot lol

Awww❤ deere o deere 🎉😊

Thank You ! I'm working on a Model 50 and none of the other videos were as helpful as yours. Much Obliged

I had the exact same issues you have with our boys gator. We replaced the gearboxes for both wheels and the shifter worked properly without replacement. I will say for anyone who takes the shifter apart and is confused why you can’t get the pieces back together properly and the shifter in the right direction know that the white part does not fit into the shifter housing the way it seems it should. The rectangular part DOES sit on top of the part where it looks like there should be a screw put in!! It took me over an hour of me loosing my mind trying to figure it out!

What is the exact spec for the light . What kelvin color to use ?

Clutch! I took mine apart and saw the same scrape mentioned in that spot. Barely hit it with an angle grinder and took just enough off to leave 1/32" gap. Ty!

Real tractors and equiptment doing real farming. Perfect.

do u need to buck the clutch side before you adjust the flywheel seen a few videos where they did

very great video. My dad had a 50 wide front serial 5007293, how close is yours to what his was?

Great video! Thank you.

Interesting. My Dad said that the engine rocking after shutdown on our model 60 gasser was the sign of a healthy engine with good compression. Never had flywheel problems, although my Uncle's AR once did.

what is the best grease to use on the dogs and toggles

Super great and easy video. Thanks for the help

Never measure from the flywheel it’s too rough to get a good reading only use the ring gear learned that one the hard way and caused some frustration when trying to set it on a 630.

Very helpful. Thank you very much. I fixed mine just like that.

Thanks for doing this tutorial. It’s good to see anything on these old 720’s

What length pto shaft do u use?

Is there a gasket that needs to be replaced on the first reduction gear fill cap?

I just bought my grandpas '59 730 es diesel. Im going to give it an oil change this coming weekend. Can i ask you to make a video on the pto operation. Everything from engaging the live pto drive to running the pto. Mine runs continuously and im not sure why as of yet.

Great video I learned alot,is the clutch assembly on your 720 the same as a 620 ?

Extremely helpful video. Thank you, Thank you very much.

I am trying to order replacement parts from Amazon or anywhere, but the only replacement shifter listed, a reviewer said did not fit the gator. Do you have links you could share for the parts?

Legend has it, that tractor has 10 hours on it and that torque wrench has not come loose. 😂 Great video. This'll give me some idea on my A.

I own a 70 and have learned so much from your video thank you .

I want to thank you for this video. My dad just recently unexpectedly passed away and he told me over the summer that next summer he was going to show me all the maintenance on the tractors. Well that didn’t get to happen.l unfortunately. But I’m fortunate for RUclips and people like you. I’ve been learning a lot and I feel comfortable doing most of the basic maintenance myself now.

Not shutting it down right is why dad couldn’t keep the flywheel tight.

What’s the jungle website?

Did you have it run for a while before adjusting the oil pressure or did you adjust it right after starting?

What is it when none of them are clicking