Видео

This is such a stupid design

Hi! did you program your new push start button or just plug and play? Thanks

If the screw on your throttle body clamp was facing the RIGHT way, that is facing the battery, you could easily loosen it from the other side BEFORE you lift the intake plenum. Someone has obviously had that off before and didn't quite assemble it right. The plenum is held on by three 10mm bolts from the factory, one longer one on the passenger side, and two shorter ones on the front and the top, not "star" tool or whatever you said or 8mm bolts. Someone must have changed those. If the one on top is missing, somebody didn't put it back on. And you never even mention the pcv vent line or the 5/8" vent tube, both of which have to be removed before removing the plenum to prevent damaging them.

Fuck the engineer that thought this was a good idea.

Were you getting key symbol on the dash? My car won’t start and I wondering now if it’s the key switch

Just got one for $30 on Amazon and it fixed my issue! Thanks for the video!!

Just did this. Dealer replaced 3 years ago under recall. Obviously a manufacturing defect that allows moisture to enter into the switch. Expect to replace this every 3 years. My symptoms involved the car randomly trying to start itself and the alarm going off.

U da man, thanks amigo!

Fire your camera man. hehe

Thanks for the info! This was super helpful and saved some 💲

Thanks, this helped so much!

Stupid design so unnecessary.

I had done this when i did spark plugs but had totally forgotten about that pesky little detail. You saved me today. Thank you!!!!!!!!!!!!!!!!!!!!!!

F#@% Thank you sooo much. What a pain in the butt.

THANK YOU!

Yes.gracias

Thanks a lot. Worked!!

Thank you for posting this!

Aha! Thanks, dude!!

Thank you, I was sweatin my ass off for this info.

Yep, that hose clamp to the throttle body was the one I couldn't find that was keeping it from releasing. Thanks

F*ck yeah it helps. Thank you

Excellent video man. First and only video I watched for this issue. Much appreciated.

Exactly what i was looking for👍🏽

Thank you! Finally a good video showing this.

For anyone else attempting this, here's a suggestion; take the air box out! You can remove the air box in a few easy minutes which makes getting to the clamp underneath a piece of cake with a ratchet extension and don't worry about the clamp, it's "fixed" and won't move on you. And when it's time to reassemble, just slightly lubricate the stiff rubber hose with wd-40 or such and pop it on with the palm of your hand. The entire process is easy, I just did it to replace my engine oil cooler lines. Thanks again for the video, it helped alot!

Thank you

Thank you

hello, where did you order the part from?

Thanks dude 🙌🏻

Simple fix for this problem is to press the button completely and spray a plastic safe electrical cleaning aerosol into the bottom edges. Let the electrical cleaner set until it's completely dry. Your switch will work as if it were brand new again. I used CRC Electro Clean....

Thanks. You made it straight forward and easy.

What year is this ..when you said star tool, I knew right away it’s not a 2018

Dude u saved me from breaking something U are the only. One who shows this Thank U

Thank you..I was soo fkng pissed, irritated I almost said f.it.ripped it off and poured gas on it and start day drinking.

J’ai la même probleme. Ou je pe trouver svp un site pour achete un nouveau bouton? Merci

Thank you for the disassembly video, mine was just dirty, I cleaned contacts with alcohol and the key fob dash light went off. Check out this video before buying a new start button. ruclips.net/video/wDZr14uvAlM/видео.html

Thanks bro

Chevy made a terrible design with this. Thanks for sharing the quick video!

Yes this is definitely more helpful than other videos I've seen , i hate that it's designed this way , changing spark plugs is ridiculous

Thanks...spent forever looking for that last screw. Video could not have been more clear.

That is some ignorant engineering by GMC

Sir, thank you so much for this video. I just ordered the parts and the tools so I'll give you an update when I change it. I have a 2016 HRV and that light has been on for a bit so I'm relieved that I found a solution. I'll keep you posted.

Thanks for video. I'm going to send the $40 bill to Honda, I didn't want to go to the dealership and wait. Wish me luck.

Thanks Alex!

Thank you sir. I about cut my effing intake cover off out of madness this morning lol

I got a warranty extension notice on the switch.

I love you. Thanks g. Was about to break it

no need to replace. just clean it with contact cleaner. usually it wasn't damage. just dirty inside🙏