Видео

Lovely watch i want one

I have one for sale

How good would this look in PVD or DLC

Only just discovered your channel. A great review.

The guy who designed it did a very good job. It’s a lot nicer to look at than some of the modern Elma

Well. Still a great review 😊 You’ve really come along sir.

It’s beautiful, and the story is fantastic.

Mühle Teutonia sportchrono please pleeeease 🤤

Hi mate, have you ever had one of these "tech filled" Sinn watches serviced? How much does this cost? Stunning watch, thanks for the video.

Nice Video. I used to work in an AD (not Sinn) and we had a very nice highly engineered Breitling guillotine cutter that cut the strap perfectly square in all planes. My thoughts are to cut one at a time even early on to practice cutting and check that leaving a bit extra still fits in clasp and fits well, as it's difficult and messy to trim off a small amount. As you get closer to the right size it's very tempting to cut two off, but 100% do not. I would use a big sharp kitchen knife. The bigger the better. I used a meat cleaver as its very solid/straight and you can make sure it is straight in both directions before simply pushing down, possibly rocking slightly while keeping in full width contact with the rubber, rather than having to slice through from one side to the other. This should give the squarest cut possible. It goes through surprisingly easily. If it's a three fold you also have to consider the final position of the clasp as you cut (another reason to do one at a time) as the Sinn strap has a dedicated 6 and 12 O'Clock side. Also make sure you have the clasp the correct way around! I have the newer three fold with micro adjustment, and was able to leave one extra piece on the strap than the instructions said to. Lastly, if you are nearly there, wear the watch for a few days before cutting another section off, as rubber wears differently to other straps and it may be best not to cut further.

That’s very interesting - full review please. 🙏

Using a drill like that cannot work. It is acceleration and deceleration which make the flywheel rotate relative to the watch casing and hence wind the watch. You would need to repeatedly stop and reverse the drill.

Beautiful piece!!

I absolutely love this channel. Go hard and stay strong. Regards Newcastle Australia from another Sinn Industrial Design Appreciation Devote

The bezel is not aligned...I really hate that

Hi Barry, this is a watch that means business. It's unbeatable in its field. Your "review" is 15 minutes of pure delight. Remember that it's impossible to review a Sinn, all we can do is appreciate them... Thanks Barry, VG Bob 🍾🥂

Just thought it wouldn't hurt to have one in 41 mm, too 😉

I can see you now have the new clasp on your 104. In your previous clasp-comparison video you opted for the old clasp over the new, due to it being slimmer and more comfy. Did you change your mind about it? I am a bit on the fence of which clasp to choose for the 104. Sinn told me I could get either (with the old being slightly cheaper). I like the idea of the old being slimmer, but new and microadjust seems cool and the pushbuttons seem easier to open than the fold-over clasp as well.

I been wanting to add a Longines watch to my small collection for some time and been looking at various models. In my opinion the Longines Spirit 37mm is the perfect size for my 6 3/4 inch wrist, the longer lugs make the watch appear slightly larger. I also adore that the date window is at 6 o’clock, as this makes it perfectly symmetrical. I get a buzz when it’s the 6th of the month as it makes the numbers perfectly aligned. On the larger models, they sit at 3 o’clock and slightly to the left which appears unbalanced. I’m pleased that I purchased the black dial with brown strap version, as it gives it a smart casual look. Along with your review, I went and purchased the watch via Francis & Gayes website.

Love it too, I wear it under rough conditions at work inside steam vessels…Maybe the best material you can use for a watchcase, german U-boat steel. I only remember some watches made of wolframcarbid (rado in the 70s), which may be more robust

Impressive watch. Wish I was a submariner!

Thanks. I have this problem with new watch...I will try this method.

Nice on Barry, awesome watch and a better take on a GMT than most 👍 can’t go wrong with a Sinn.

Thanks for featuring another classic EZM - well done on the "Einsatzzeitmesser" :-) Cheers from #sinncity Frankfurt!

like it.

Nice video. Thanks. That watch is far too big for me, so I bought the 856 UTC several years ago.

Overdue review and very well done Barry. I love this model proper beast

I think a silicon strap might make a big watch look better on a smaller wrist than the bracelet

I need a red silicon strap!! I call it a Di**do on my wrist 😂 Scary to cut though and a professional strap cutting tool would be worth the effort if you can get the use of one.

Love my U212 47mm 😈 but actually thinner at 14.5mm. Silicon strap makes it even more of a beast!

Wonder if it would look good on a ARTEM Deployant strap ?

I'm very happy with my UX, so I don't need a U2 at all. However, I look forward to what Sinn is bringing us this year. Their last few LEs have been muted (the Hai U50?, T50?).

Love my skx 007

If you can’t say something nice you shouldn’t say anything at all. That’s how I was raised though I’m not perfect, only human, and from time to time I falter. I digress. Thanks for the thorough and constructive review on a heretofore unknown brand to me.

I think it's time for Sinn to do a U50 version of this watch, it's an awesome looking beast! But they have to keep the dial the way it is here, they made the T50 and U50 Hydro dials too simplified. These are much toolier, interesting and special looking with the more robust markers! So just make it a straight down-size like they did from the U1 to the U50.

🔥🔥🔥🇩🇪🇩🇪🇩🇪👍👍👍

As a former heat treatment tradesman here in Australia, 1200HV-1500HV is bloody hard! I was wearing my Muhle Glashutte SAR yesterday & it only has a lousy 1000m water resistance. 🥱 Time to upgrade & deepen the bath tub!🤣

I've owned all the related Sinn over the past 5 years, but none stuck in the collection (U1, U2 SE, U212, UX). Liked but didn't love. Finally got a chance to own the U2 when a too good to pass up deal came along last year, and it seems I saved the best for last. I was originally thinking it would be ideal for travel when you don't want the safety risk that the bigger dollar pieces seem to come with. In spite of it being the least costly piece in my collection, it still manages to grab wrist time away from the others. I think because it is so unique, it provides a refreshing change from some of the other pieces. I threw it on a high quality after-market rubber (Zealande) and it is a perfect combo. The integrated rubber and thick clasp that came stock are great when you're out walking around, but when you're behind the computer like I often am, not at all comfortable. The after-market strap solved that nicely.

mine was not so mighty

Love my U1 and just a few days ago I was thinking of another Sinn...

Oh my man… we’ve been back and forth for a few years now but you know my fully tegimented ezm5 and ball engineer II magneto S are my babies 👶

I have one on my wrist. love it

Love the U2 - have actually spent the last few days looking into it so very well timed video. Fingers crossed they decide to recreate the U2 in the size of the U50. Thanks for sharing

That’s a lovely watch. I wonder if the clever folks at Sinn could ever make a hydro quartz version because the legibility of your UX is insanely good. Not that I should be looking at any of your reviews as I’ve just heard my Arktis has arrived and I can pick it up this weekend - woohoo! Keep up the good work, these videos are a lovely treat. Your passion and knowledge really comes through.

Wow serendipity I was just on eBay looking for one today. Luckily the few for sale are in Japan and Bob got the one I want. Thanks for showing off an oldie but goodie.

Pretty class

Prestex is a very cool brand! Glad to see them get some air time. I really love the price point of these time pieces, a lot of beautiful designs and quite accessible

Give us a Glashütte Original 🥰