Видео

Sure. You can post your question here and we will try our best to address your concerns.

The device is in beta testing and will be available in a few months.

@@softcircuits_labsis it available to buy now?

The device is in beta testing and we will share the link once it is up for sale on our website.

​@@softcircuits_labsrespected sir I am interested to buy your product as tester after few months use I am share my experience with you

Yes 👍

@@softcircuits_labs water pressure can vary with changes in water temperature. Since water tanks are exposed to sunlight during the day and cools down at night, there will be temperature variations. Please take this into account during beta testing.

@@donythomas7 Thanks for the feedback. We also considered the changes in water temperature, but the change in overall pressure due to temperature variations is very small ( <1% change). So, this change is negligible for the case of household water tanks.

Glad to be of help. Thanks a lot for such a heartfelt comment.. 😁😁

Yes, children and monkeys playing with the equipment is a bit of an issue in India. But we can't place the device inside the tank since it needs direct access to sunlight. We have given mounting holes on the enclosure and people who have theft issues can use screws to mount the device.

You can find all the details related to the SoftCircuits Plasma THC on this page : www.softcircuits.in/product-page/plasma-thc . The price mentioned on the page is inclusive of GST.

@@softcircuits_labs machine price is not showing

Hi. Current price in India is Rs. 17,000 (including GST and shipping). You can also write to us at manager.softcircuits@gmail.com or connect@softcircuits.in if you need more information.

I have used the THC with and without pilot arc both. But the performance is always better with the pilot arc. The wiring of the THC is the same whether you use the pilot arc or don't use it.

Thank you so much.. Glad to be of help.😁

Thanks a lot.

This product is in beta testing currently, and will be available in a couple of months.

Beta testing completed?

@@ankeshkosh so now it's available or not.

​@@softcircuits_labs is it available to buy now ??

The THC functionality is independent of touch probe. So, if you need to use a probe system you can install it separately.

Thanks a lot for watching our content. Your kind words keep our team motivated. 😄

Hi, please write to us at manager.softcircuits@gmail.com , and we will share the payment details with you.

Интересует именно контроль высоты плазмы (факела). Плата mach 3 у меня есть.

И какая стоимость контроллера?

So, do you have a mach3 parallel port controller (the one showed in the video) or mach3 USB controller?

Как правильно я понимаю, на видео представлен контроллер высоты плазмы(горелки)??? К mach 3 подходит? Да этот комплект что на видео?

Glad you like the video.. 😀😀

This is a simple hobby grade spot welder and its performance is fine. We got this from robu -robu.in/product/12v-battery-storage-spot-welding-machine-pcb-circuit-board/ , but you can search similar ones online.

👍👍

Thanks a lot. Really happy to know that it was of some help to you ... .😊😊

Hi Hariom.. I think the issue is with USB to parallel port converter. The only converter that works is the original UC100 cable, but that is not available in India and chinese clones are not good. I think you should try to find a computer with parallel port and try with the parallel port cable..

@@softcircuits_labs love you bro. me bo hu jo har nahi manta. isliye itna time lga diya. pura internet dekh dala or video dekh dali. 😀 thank you for reply. ok now i understanding the matter. ok so i ordering this uc100. then it can run on normal setup ?

@@hariombhardwaj7620 well, I have not used the UC100 cable myself, since I couldn't get the original one and did not want to waste time on the clones. But, I have seen people use the UC100 cable and run mach3 parallel port controller on normal setup.

@@softcircuits_labs ok

Hi. - You can order the Torch Height Controller from our website www.softcircuits.in/product-page/plasma-thc , or send us an email at connect@softcircuits.in. - We got the MACH3 board from a local vendor but here is a link for reference : robu.in/product/mach3-interface-board-cnc-5-axis-optocoupler-stepper-motor-driver/ All the other parts are generic parts which should be available in electronics stores (online or offline) in your area.

I'm building aplasma cutter

Hi. Here is the cost of THC Package (including THC Driver, THC Probe Sensor, Power Supplies, Optical Cable) : International Buyers : USD 200 + Shipping Indian Buyers : INR 17,100 (including GST) + free shipping.

Hi.. If you mean BL-MACH-V1.1 controller card, the USB port is given only to power up the card, but it will send signals only through parallel port. Could you please share the datasheet of your controller card, so that I can answer you more precisely?

@@softcircuits_labs thanknyou for your reply, you answered my question perfectly, i pirchased an ecomotiom rnr board and they sent me the pl -v1.1 , i dont have printer port in any of my computers.

@@mightyweapon The ecomotion RNR doesn't support the THC functionality. It's good for routers but won't work for plasma CNC. So, I guess you have 3 options - 1) get an old PC with parallel port. 2) get some other CNC card that has USB or 3) explore GRBL CNC controllers.

@@softcircuits_labs this is for a cnc cylinder honing machine, two nema34 12.5 nm, one drives ballscrew for z axis and one rotates the hone head (spindle) for me its easier to do this with mach 3, and as this is a portable machine im using a small notebook laptop as a large pc is not portable

@@mightyweapon in that case, USB mach3 is definitely a good option for you. If ecomotion RNR is not available, i think any USB MACH3 card will work for you application. (There are many such cards available online like this - www.amazon.com/Controller-100Khz-Breakout-Engraving-Stepper/dp/B08BJWF1GY/ref=sr_1_9?keywords=mach3+controller&qid=1660201979&sr=8-9 )

Thank you for supporting our channel. We will try to bring more helpful content in the future..🙏🙏

Glad you liked this video.. 😀👍😀👍

Great to hear this Amir.. Since we have known the struggles of building our own DIY Plasma CNC first-hand, we try our best to help our customers during and after the installation in any way we can. Thanks a lot for the feedback.😄😄

Thanks Pradeep.. 🙏🙏

Thanks Kashif.. Glad it was helpful.. 😀

👍

Glad it was helpful! 😁

Hi Faris. You can find the wiring diagram in the product images on the product listing page here: www.softcircuits.in/product-page/plasma-thc . Please refer to the datasheet for more details and if you need further information, you can reach out to us anytime on call or via email. (at +91-8376945916 | connect@softcircuits.in ).