Видео

Can I sign out MS account after switch to normal from S mode. Will everything work fine after signing out?

Here's a suggestion... Instead of using fishing lines, use a thin steel cable instead. It's stronger, less flexible than nylon, and you only have to set it up once

I was seriously considering a “Black Santa” like this one, but I got cold feet thinking my neighbors might call the police and them thinking someone breaking into my house and possibly bullets flying through my windows. Therefore I’ll just order the white Santa for now, looks wonderful. 👍🏾

As long as the EGR valve doesn't blow the non-walk-home fuse, it just needs a cleaning. problem with these, is that the engine sometimes doesn't reach operating temperature, mine has come online a mile or 2 from home.

Too much work

Where can I go to have options on coupling sizes??? I’m using wheels from an old wheelchair and I can’t find anything that works! Do you think this blue one from Amazon could work? Help! I feel defeated and I’m ready to start decorating for Halloween! 🙏🏼

I welded the rim to the motor lol

Thanks it worked 🎉

a few problems I can see. 1. You need to hols the drive wheel on BOTH sides of the shaft. The wheel needs to be on the other aide of the 4x4 with a 2x4 at the top AND bottom. You can ise aluminum square stock instead of the 2x4's. 2. At the other end where the idler wheel is, again put the wheel on the opposite side and make it so the wheel can slide away from the 4x4. Get two rollee blasé wheels mounted to 3/8 rod and let the roller blade wheel roll along the idler wheel. The roller blade wheels is attached to a threaded rod that has a nut and washer, thebln goes thru the 4x4. This way you can adjust the tension on the main line. Think of how a tram line works. You can jave the display fly all around your property too!! You can add a raspberry pi zero on a battery to make eyes blink, and lights within the costume

10:08 works better if you reverse the operations. Might be better to run wheel vertically.

Just set this up. You can use the coupling but drill through and bolt it on. I first drilled and used cotter pins but the tension on the wheel made it so crooked the line immediately came off. I'm trying spider wire 65lbs test. I'm going to let it run until it fails. I'll post results. Also get a piece of 1/8 aluminum sheet metal and make a bracket for the motor. No way on the one I had could you notch the 2x4 because the threaded holes were to close the shift so I made a pattern and then an aluminum bracket which mounts it easily to your frame. Also Walmart sells a small ghost for 3.98 that works well.

Work great 💪🏿 THANKS!

Nice video. It would have been even better if you stopped at the stop signs.

I just took my Chevy 2017 volt to the dealership with the same problem: clogged egr/cooler due to using regular gas instead of premium. They replaced the system for free under GM extended warranty of 15 years/ 150k miles. The same applies to the BECM problem. From now on, I will only use premium fuel plus ocasional fuel system cleaner. Also, driving on gas could contribute to cleaning the system.

Drill the spade bit first! Also, if you keep the plug inside the top box, you don't have to worry about rain getting into the plug.

Another reason to get GEN1 VOLT. NO EGR SYSTEM AT ALL.

I'm wondering what if you went clear around that wheel once The ghost would do a loopy loop each time I hit the end that would keep it on the wheel not just going around and going back but going clear around the wheel and the second time it's going back

An alternative to the windshield wiper moter is a variable speed adjustable motor. I haven't used one on this scale, but I do favor those kind. It would be neat to be able to have a couple of these going at different speeds and maybe in different directions. You could add one more ghost to the opposite side so you have one going in either direction as it goes around. 🤔 💭

kenvitatoe RUclips E bike

This is a great tutorial!!! Thanks for making it with so much detail and no fluff. ✨

Thanks mate ❤

thank you Sir

Great job!

Have you tried tarred bank line? It doesn't stretch and it's small diameter. It might be easier to get it so it doesn't keep popping off.

👎👎👎👎👎 I would have liked to watch this video, but I had to watch two commercials to get to the video and as soon as it started I had to watch another, so I just left..!

Omg thank you I just brought new gaming laptop and couldn’t download ea launcher but your video was helpful everyone else video wasn’t straight to the point

This is awesome. Definitely trying this out!

This is why I love y’all Halloween geeks. So smart and creative. Incredible watching people carry out tasks they’re passionate about

great job..great info. Thanks

When the emblem starts to fade do you recoat it or strip it down then redo it?

Does you projector has to have reverse function in order to project from behind widow?

This guy does not deserve to own a 4x4 vehicle. Scared of a little mud puddle. Grow some balls

Cool tutorial - it is definitely igniting my imagination how I can incorporate this in my haunt. Your brothers are a nice addition.

Awesome. Been hassling about this issue. Thanks😊

They only video that helped me thank you so much

It looks like a dementor from Harry Potter

Hi, my snow machine has a big sticker stating "no flammable liquid" is the alcohol reduced enough for it not to be an issue? Thanks

great video, thank you so much

Engine rough for 3 years old

I want to say THANK You for the excellent instructions. You are very patient and soft spoken love the video. I just have a question what ya building this year? Keep the videos coming

Super cool

i love u

Have you tried CLP that is used to clean carbon from guns? Spray it on and it dissolves it right off.

S mode doesn’t show up as an option for me what do I do?

Boy, you are a lifesaver

Short, simple, helpful, thank you!

Well done sir. Try using a trucker's hitch for the knot. Turn the posts parallel to "de-torque" the posts.

You did the best demonstration I have ever followed. Very detailed. It would take a real idiot to not be able to follow your instructions. Mine went very well. Thank you.

Thank you!

Finally! Thank you Dr Rick, I’ve literally spent nearly an hour and a half trying to sort this until I found your video and it took two minutes! Subscribed!