Reyes Racing
Reyes Racing
  • Видео 14
  • Просмотров 483 590
2014 Mustang GT Oil Change
I'm performing a simple job and suggesting tips to do the best job you can. You can torque the drain bolt with a new crush washer to 20 ft. lbs. If you have any suggestions, please share with everyone under the comments. Thanks for watching!
Tools Used:
Low Profile Jack
Jack Stand
Drain Pans
Funnel
Bag
Rags
3/8" Drive Ratchet
3/8" Drive 15mm Socket
Universal 3-Jaw Oil Filter Wrench
Gearwrench/KD Tools 3288D
8mm wrench
Parts Used:
Motorcraft Oil Filter
FL-500S
Royal Purple Oil
5W20
Crush Washer
12mm
Просмотров: 19 840

Видео

VW MK7 COBB Stage 1 Plus
Просмотров 6 тыс.7 лет назад
This video shows graphs for the GTI with the COBB Stage 1 Plus map. The car is using the stock air box / intake system, Denso Spark Plugs, K&N Air Filter. The dyno runs are being performed using 4th gear.
VW MK7 COBB Tuning Stage 1 Dyno
Просмотров 13 тыс.7 лет назад
In this video, I'm showing the VW MK7 GTI on the dyno and showing the graphs between the COBB Stage 1 Tune vs. Stock. At the end of the video you'll be seeing a short clip where it shows all of the Dyno Runs from the Video 1-4.
VW MK7 Stock Dyno
Просмотров 19 тыс.7 лет назад
3 Stock Dyno runs with graphs... includes Bonus Footage!
MK7 MAPerformance BETA Stage 1
Просмотров 7917 лет назад
I will be showing dyno runs of the MAPerformance Beta Stage 1 Tune using the COBB Accessport. I am showing three runs and dyno graphs for each of the runs.
MK7 MAPerformance Stage 1 Dyno
Просмотров 4,8 тыс.7 лет назад
Testing Tunes using COBB Accessport. I'll be showing what performance you'll be gaining/losing. I forgot to mention in the video that all of the dyne runs were performed in 4th gear. The car has a K&N replacement air filter and Denso IKH24 Spark Plugs.
Nissan Altima Thermostat / Water Valve Replacement
Просмотров 195 тыс.7 лет назад
I will be showing the steps you will have to take for the replacement of the Thermostat and the Water Valve. Tools Used: Long Phillips Screw Driver 3/8" Drive Ratchet 3/8" Drive 3" Extension 3/8" Drive 6" Extension 3/8" Drive 10mm Socket 3/8" Drive 13mm Socket 90 degree Needle Nose Pliers 90 degree Radiator Hose Pick Ramps Drain Pan Lisle 24680 Spill Free Funnel Parts Used: Thermostat Part Numb...
BG 44K Test Results / Acura TL Dyno
Просмотров 89 тыс.7 лет назад
I will be showing the combustion chamber and performing a dyno run on the 05 Acura TL after using the BG 44K (PN 208) fuel system cleaner.
BG 44K Test / Acura TL Dyno
Просмотров 56 тыс.7 лет назад
I will be showing the combustion chamber and performing a dyno run on the 05 Acura TL before using the BG 44K (PN 208) fuel system cleaner.
SeaFoam with Proof Acura TL (Part 2)
Просмотров 11 тыс.7 лет назад
I will be showing the results of using SeaFoam! To view Part 1 ruclips.net/video/bkspdkZZuSk/видео.html
SeaFoam with Proof Acura TL (Part 1)
Просмотров 23 тыс.7 лет назад
This is "Part 1 The Test" where I will be showing the Intake Valves and Piston Tops before using SeaFoam on a 2005 Acura TL with 172K Miles. I will be using a special tool to regulate the amount of SeaFoam going into the engine.
Intake Cleaning (Carbon Cleaning Tool)
Просмотров 4,2 тыс.7 лет назад
Best way to introduce carbon cleaning solvents through vacuum lines.
TL A1 Service (Oil Change/Maintenance Reset)
Просмотров 7 тыс.7 лет назад
2005 Acura TL Oil Change, Rotate Tires 5W20 Synthetic Engine Oil 4.5 quarts/4.3 liters Drain Bolt Torque 29 lb-ft/39 Nm Wheel Nut Torque 80 lb-ft/108 Nm Tools Used Jack, Jack Stands, Drain Pan 1/2 Impact Gun 3/8, 1/2 Torque Wrench 1/2 Drive 19mm Socket 3/8 Ratchet 3/8 Drive 17mm Socket
Subaru Forester Differential Oil Change
Просмотров 35 тыс.7 лет назад
2014 Subaru Forester XT The front differential uses 1.5 quarts/1.4 liters. The drain bolt is a T70 torx and is torqued to 51.6 lb-ft/70 Nm. The overflow bolt is a 14mm bolt and is torqued to 25.8 lb-ft/35Nm. Tools used, ramps, jack, jack stands measuring tape 1/2" breaker bar 1/2" drive T70 torx 3/8" drive ratchet, 14mm socket 3/8" - 1/2" adaptor torque wrench Drain Pan, Funnel/Pump

Комментарии

  • @jonathanmurphy3282
    @jonathanmurphy3282 2 месяца назад

    Next time make it without the music. Very hard to concentrate

  • @James-rk6go
    @James-rk6go 4 месяца назад

    Inconclusive video. Poor test 👎👎 #BG44Kforthewin 🏁

  • @jefferylorance7988
    @jefferylorance7988 5 месяцев назад

    BG44K also mentions it will clean out the fuel filters ( this was news to us)..cleans out the gas tank, fuel lines, etc..best to research this further..

  • @jefferylorance7988
    @jefferylorance7988 5 месяцев назад

    My mechanic of 30 years, highly recommend this BG44K. One of his clients bought a 1996 Toyota Pick-up from one of my friends..my mechanic recommended to add 44k ..he was surprised after using this product ,after less then 100 miles could not believe how much better the Toyota was running ..he use the word it was “ purring “

  • @jefferylorance7988
    @jefferylorance7988 5 месяцев назад

    Your expectations was to much! This is not a miracle fuel cleaner. It is like sand paper…takes a while to get a smoother/ cleaner valve… You will always find people who do not believe…but there are more people who found it work for there applications… My gas generator is running more smoothly… They say ever 15,000 miles add another can.. My Jeep Compass after one fill of gas ..seems to be smoother..I am a believer..

  • @jeffortman6395
    @jeffortman6395 5 месяцев назад

    Isn't 5w30 better in warmer weather? I thought 5w20 is for cold weather like in Canada 🇨🇦

  • @jafp1617
    @jafp1617 5 месяцев назад

    Am i reading it right? The car lost HP and torque 😢

    • @ufanisoneetze
      @ufanisoneetze 5 месяцев назад

      lol holy damn i read it as well, we gotta stay clear of these stuff lmao leave this shit to the lawnmower

  • @pfconrey
    @pfconrey 6 месяцев назад

    Great info; music is too loud.

  • @johnfredrick5339
    @johnfredrick5339 7 месяцев назад

    I really enjoyed that video I have a 2007 Nissan Altima by the way where did you get that funnel and what did you say the name of it was

  • @zzman5306
    @zzman5306 7 месяцев назад

    you can see it did do some cleaning

  • @douglasthompson9482
    @douglasthompson9482 7 месяцев назад

    Good video…thank you

  • @eddiehueso90skid11
    @eddiehueso90skid11 8 месяцев назад

    THOUGHT I WAS WATCHING A TECH MOVIE PRODUCED BY THE SHAFT PRODUCER

  • @Whirldwind.Thru.Cities
    @Whirldwind.Thru.Cities 8 месяцев назад

    Horrible video, i think you should come to my house and show me how you do it on my car so i can see. If your going to save me money save every penny not just half.

  • @Charlies_Outdoors
    @Charlies_Outdoors 9 месяцев назад

    Good info but the music over you explanation of what to do is annoying

  • @sunnysss2489
    @sunnysss2489 11 месяцев назад

    Inspector gadget😅

  • @Twobarpsi
    @Twobarpsi 11 месяцев назад

    Why do these engines have 2 thermostats?

  • @ProWilson21
    @ProWilson21 11 месяцев назад

    Turn down the music and show what you are doing not your face🤨 I have no idea what your hands are doing down in that area…🤔

  • @MC-ph7gr
    @MC-ph7gr Год назад

    Hello. I have a 2010 Altima 2.5L. My check engine light is on due to a thermostat warning. My engine heats up a little late but not too late. When I took out the thermostat, the top part was completely close and the bottom completely open. What can be the problem? TY

  • @darrylleigh7514
    @darrylleigh7514 Год назад

    BG 44 works. Especially if you pair it with doing a BG induction clean. Been a master tech for 40 years. I do it on my vehicles. If it didn't work I wouldn't use it. Been using BG 44k since 1985. Enough said.

  • @sarahoverton2251
    @sarahoverton2251 Год назад

    No demonstration

  • @sarahoverton2251
    @sarahoverton2251 Год назад

    This video sucks. I didn't show us really how do do it

  • @RyanMcCarthyT
    @RyanMcCarthyT Год назад

    what is this bottle system?

  • @anthony.fsanchez1176
    @anthony.fsanchez1176 Год назад

    Great video my man ! I was wondering about that funnel you used at the end ,Was that used to prevent air bubbles going into the system so it doesn't overheat? I noticed u never mentioned an air bleeder valve like what my Dodge charger has whenever I have to work on my cooling system I always have to bleed it out or she'll overheat.

  • @paveljelinek772
    @paveljelinek772 Год назад

    That was 6 years ago.. now they have BG 208 Platinum and this crazy expensive stuff finally WORX!!! Tested on my rapído

    • @ufanisoneetze
      @ufanisoneetze 5 месяцев назад

      works how? in this video it made his vehicle literally 10% weaker.... we need a new video

    • @paveljelinek772
      @paveljelinek772 5 месяцев назад

      @@ufanisoneetze well my overall consumption went a tiny bit lower, car does not shake as much at idle, is little bit quieter now (injection's noisy, it claps).. i am generally satusfied.. i also did the EPR thingy twice and use MOA with every oil change, i am able to go as low as 4.4/100 with fully laden car (AC off) 1.0TSi

    • @paveljelinek772
      @paveljelinek772 5 месяцев назад

      And 5.3/100 with pedal floored with family, 5.0/100 alone.. generally my car WON'T go over 6/100 longer rides.. 6/100 max town/city

  • @Jedi_Luke
    @Jedi_Luke Год назад

    Terrible video. Unnecessary music and the camera is way too far away.

  • @Crpegues
    @Crpegues Год назад

    I was getting a p0300 random misfire code and rough idle. Poured a can of bg44k in the tank and no more random misfires or rough idle. 2014 QX80

    • @paveljelinek772
      @paveljelinek772 Год назад

      same heere.. it was twitching from 1-2k revs a min before, after no prob, car is 5km/h faster on deutsche autobahn

  • @kanedalokk5245
    @kanedalokk5245 Год назад

    Horrible demonstration

  • @linvesel
    @linvesel Год назад

    Very informative. And very exciting and enthusiastic presentation. Actually, I think the boroscope revealed almost brand new pistons. I added this to empty gas tank and after a half a tank use inspected the cylinders in my 3.2 V6 Benz. I discovered two more cylinders and more displacement of 6.3 liters in total.

    • @joegio2425
      @joegio2425 Год назад

      Irony FTW

    • @linvesel
      @linvesel Год назад

      @@joegio2425 I see nothing ironic in my scientifically established findings. In Aristotle’s words, “There is no irony or replacement for engine displacement.” So true.

  • @KMM667
    @KMM667 Год назад

    music too loud friend I can't hear anything you say

  • @2_2_4_3
    @2_2_4_3 Год назад

    This is WHP , that's dope!! How do I know??? my built Civic 2.0 B20Vtec dynoed at 210 and my stock FBO MK7 would smoke it.

  • @frfrpr
    @frfrpr Год назад

    Definite good and informative. Mean Man-Cave

  • @gregsullivan8065
    @gregsullivan8065 Год назад

    Thanks for a good how to video. Not sure why folks are throwing the hate on the music or your narrative. Seems pretty clear to me.

  • @musicfashionstyle4251
    @musicfashionstyle4251 Год назад

    Does BG44K it work well?

  • @400hpmustang
    @400hpmustang Год назад

    I go 1/2 turn after it begins to seat and just a bit more. That way you can get it off with your bare hands, never have had an issue.

  • @timothyfakhoury8466
    @timothyfakhoury8466 Год назад

    Is this a 6cyl

    • @gregsullivan8065
      @gregsullivan8065 Год назад

      Definitely not a six cylinder. This is a 2.5S. You can tell by the plastic wheel covers, and the plastic sound insulator cover on the motor. As well as the exhaust heat shield in front.

  • @MrScoopp
    @MrScoopp Год назад

    My car with 115K miles accelerated much better and the gas mileage improved with one can. Continued over 2 oil changes.

  • @DougVandegrift
    @DougVandegrift Год назад

    Oil filter is in the dumbest location. I finally stopped having shops do my oil changes and here's what I noticed. I only have two screws holding up the panel. One was lost. Also my connectors under the filter are covered in oil spill. Shops charge a LOT and do a terrible job.

    • @jjcooljj139
      @jjcooljj139 Год назад

      Your right the dealership did mine for years I decided to do mine one day and it was messy from when they did it you can tell they didnt care.

  • @patriotarmament7407
    @patriotarmament7407 Год назад

    Nothing beats good ole Berryman.

  • @robertfenn8392
    @robertfenn8392 Год назад

    I think it might be more helpful if more of the video was much closer to the work.

    • @BullyBreaker
      @BullyBreaker Год назад

      Thanks we’ll go back to the past and tell him beforehand 🤓

  • @MrPompa1210
    @MrPompa1210 Год назад

    Your supposed to use it and run 3 tanks of gas after yo we a result

  • @gphilipc2031
    @gphilipc2031 2 года назад

    I'm thinking cost / benefit. Say we use it for recommended intervals for 6 months then do a before and after. I agree though, you can't buy a mechanic in a can.

  • @danp7463
    @danp7463 2 года назад

    The beauty of multi-port fuel injection. I won't buy a car that uses direct injection.

  • @jerrysabio7290
    @jerrysabio7290 2 года назад

    Thanks for your video, I'm planning to change the gear for my Subaru forester xt 2014

  • @jerrysabio7290
    @jerrysabio7290 2 года назад

    Good day! what number of torx wrench for drain plug, T60 , T65 or T 70? Thnx for your reply.

  • @Justinbpierson
    @Justinbpierson 2 года назад

    Wrong Jack points in YOUR photo. The other diagram is correct.

  • @DesmondArtois
    @DesmondArtois 2 года назад

    "and here we are removing a tube from a part" Good thing I'm 6 hours into this job and know what parts your talking about because of the bolt placement. 🖕

  • @angelcolon1644
    @angelcolon1644 2 года назад

    Awsome job.i like how you showed it step by step.thumbs up.love the video.

  • @marks3680
    @marks3680 2 года назад

    Been using it for years. Brought my 87 GMC Jimmy back to life. I do it every 6 months for clean out. There is no such thing as a one and done. It's maintenance. I know use it in my second gen dodge ram every six months. They ask me how I keep the engine running smooth on a 5.9 V8 with over 215,000 miles? I tell them Mobile One full synthetic, BG44K with MOA, and Prolong Transmission additive. Beast of a truck.

  • @fredmoss4540
    @fredmoss4540 2 года назад

    I was told by Motorweek TV resident mechanic Pat Goss who was BG spokesman on his local automobile show. This was years ago put BG 44K Fuel treatment in on low tank of gas. Fill-up immediately after pour in tank. Then drive the vehicle normally. You do not want to burn that tank of gas out to soon. So don't take a long road trip. So like shorter trips vehicle So it can stay in tank longer. When I got my 2000 Acura 3.2 TL new the Dealership had in its maintenance handbook they would install BG 44K at certain service intervals. My sister had a Dodge Minivan 1993 the Dodge service was using it way back then. 2nd Generation Acura TL check engine light. Car sat unstated for 18 months. Towed to service suspect it was just Air intake boot old busted hose. Had to go through emissions so got car up running. They did the BG Platinum Fuel Injection Service that cost $225.00 and Engine Flush $115.00 they put cheaper fuel additive in gas tank. It probably was Lucas at $5.45 I will put a bottle of BG 44K in at next oil change 1st of year. Car is responsive after service at 23yrs old low mileage almost 105,000. Just ordered a bottle of 44k for nephews Ford Focus.

    • @Rekmeyata
      @Rekmeyata Год назад

      My Acura has 138,000 miles, never used any additive just mostly Shell Premium, and it's still quite responsive. This has been the same result with all my cars, even one that I ran untill it had about 320,000 miles on a Nissan 280zx before selling it, and it was still running like a fine Swiss watch. I watched many videos on this additive stuff, funny how each video has a different brand of cleaner result from another, so I don't take any of these videos as being accurate. I think paying money for an additive is a waste of money.

  • @terryallen5451
    @terryallen5451 2 года назад

    Being a bit of a novice ,i just couldn't see enough of what you were doing