Видео

If you look at the power button, there is a tiny hole beside it. That is the reset button. Try using a needle to press the reset button, and reconnect the glasses. Make sure you are using the cable that came with the glasses to communicate with the glasses. Try using a cell phone to connect to the glasses to see if that works, and if it does, it is a problem with your computer. You may also try restarting your computer system, - there may be a conflict in your system files, and a restart should correct that. The manual shows where the reset button is, but it says nothing about using it or how to use it. I am assuming that you just press the reset button to fix a communication problem. Let us know if you have any luck with these steps.

I have found that when it comes to air quality - cheap is definitely not the way to go. I do not know of any cheap good quality monitors.

First of all. A monitor that uses data from a sensor to give readings for another type of sensor is invalid and is NOT to be trusted for any reason. The only true reading is from an actual sensor NOT another sensors data such as the Bosean. It is unfortunate because people are falling for these false monitors, and are not getting true, correct or accurate information. Quingping seems to be a good monitor, but unfortunately I cannot afford to make the purchase for testing and review, and why I have had to put air quality videos on hold for the foreseeable future. I have contacted Quingping, and a few other companies about testing and reviewing their monitors, but as soon as they check out my channel, they don't get back to me. I have a friend who bought two Quingping monitors, and had to return them both, so I can't recommend them on that grounds, plus I cannot recommend anything unless I have thoroughly tested it personally. The friend I just spoke about, also bought the uHoo monitor, and loves it. He has sent me data and I really like it myself, but it is quite expensive and I cannot afford to purchase it. I contacted uHoo about sending me their monitor for testing and review, but they also never got back with me. I am also having to consider the fact that companies are not getting back to me because Outside In just is not big enough yet, so it wouldn't financially make sense to them to send a monitor to me for review. I hope this helps, and will be happy to do more air quality monitor reviews when companies are willing to send them to me for testing and review.

@MFW4 take along a power bank to power the glasses. You will get much more recording time.

Awesome - would love to see that video :). Thanks for the comment and story.

I'll email u

Thanks Robert 👍

Awesome, glad to know it helped someone. Thanks Rob for the comment, and help - much appreciated. 👍

Thanks. Sorry about that. I have been going through a lot of truck problems, so trying to spend time figuring out what is wrong, and even after a couple of repairs, still the truck is not running, so not sure what is going on. Don't have the finance to buy another vehicle, so at this point - don't know what I am going to do - kinda scary LOL because without a vehicle, I can't create income to pay the bills. Just say a prayer that I can get this figured out soon :). I am working on another video now about the second repair I did, well, actually the third repair. After more than 400,000 miles, I think this thing is about to croak 😱

Thank you for your comment and thoughts, much appreciated 👍

I don't see why not, it most definitely should. Thanks for the question. 👍

@@Outside-In. I’ll give it a go thankyou

Great, let us know if it works, so we can know for sure - thanks. 👍

@@Outside-In. it works perfectly 👌

@@CRIMINALINTENT Thanks for the confirmation 👍

I am still learning as well - wait I will be learning till the day I am gone LOL. Yes, I really like this sucker and you will too once you get one. I can't afford the expensive ones, but for the diy stuff I do, it is perfect... Thanks for your comment and thoughts - much appreciated. 👍

No, I did not cover any post production editing.

I know what you mean, I have done that myself and you are right - it is not very comfortable 😮‍💨😫

I was born left-handed, but was taught when I was a kid to be right-handed, and that was because my Mother said that they didn't make too many things for left-handed people, so why my parents had me tutored to be right-handed. Thanks for your question, I hope the answer has been helpful. 👍

Thanks for the information. Hopefully you get one that actually works. The randomness of getting one that works is why I don't recommend these any longer. Let us know how the new one does. 👍

I am assuming you are thanking Bob because he helped with the purchase, so yes indeed - Thank you Bob for that. It is good to know that there is at least one of these that has an actual audio option in the settings text file :). And - Thank you for your comment and thoughts, much appreciated. 👍

I’m an idiot. I don’t know where I got Bob from. Thank you Stephen 😅.

@@CadiyakFishing I think it was because I was thanking Bob for going in on half the cost of the glasses to do the video for him. 👍

@@Outside-In. I just finished editing my latest video where I thanked bob lol. but I think I cleaned it up and put you guys in the comments. thanks again.

@@CadiyakFishing Thank you, I will definitely go check that video out. I like seeing others' experience with these glasses. 👍

@wildeocean You are welcome 👍 Thanks for your thoughts and comment, - much appreciated.

@atmian I know what you mean... I also have heard nothing from Jim in about 8 months, so not sure what they are doing.

@@ADRoadsideAutorepair I am pretty sure you have to stop the recording before taking a photo.

This does not have Bluetooth or WiFi ability, so am not sure what the antenna you speak about would be for.

You are exactly correct. It depends heavily on the battery and cables for sure to get the best performance.

BOMATA Upgraded Small Food Scale www.amazon.com/dp/B0B63Q1CDS, but I see that it is currently unavailable.

I repeated the process and it work. Great video that made it way easier than following Foxpros directions

​@@rainman1326 I just noticed this second comment, as I was about to suggest it may be a refresh problem, and was going to suggest taking out your card and re-insert it, but it seems you already tried something similar. It is weird but I was also thinking that a re-install might work, but thought there is no way it could be that simple, but I guess I was wrong. Glad to hear it finally worked for you, and also thankful that you commented on your fix, as the way you fixed your issue could help others having the same problem. 👍👍

That is most unfortunate. Thanks for the update.

Thank you for your comment and thoughts, much appreciated. I agree that 1080P 50 would be the better option. 4k is not real in these so no need to use it as it would just use too much space like you say. These are very good for the price and pretty decent quality video. 👍

Thank you for your thoughts - much appreciated

👍

Thanks for your comment - much appreciated

Glad it helped. Sending it back?... Would be nice to hear if you can get your CO2 levels down. How high if you don't mind my asking?

I don't believe so, because this does not work as a web cam that I know of.

Thank you for your question. I do not have an iPhone to test this, so no I do not know how to use this with an iPhone. Does anything at all happen when you plug it into to iPhone?. Are you using the cable that came with the glasses?. There may be an option in your usb settings to use the usb port for charging or data transfer. These are just ideas that will hopefully lead you to an answer. I know this probably hasn't been much help, but hopefully something I said will help...

TemTop was supposed to send me the M10+ for review but they decided not to, so I cannot recommend something that I have not tested. The M10+ is supposed to have a legitimate TVOC sensor so would recommend it over the M10 that does not have a legitimate sensor inside, but like I say, I cannot recommend a product that I have not tested, and I can't afford to make the purchase on my own. I wish I could be of more help. I do appreciate the comment and question.

Sorry about that, but they made it that way, and why I don't recommend it.

@@payitforward81152 👍

No it will not shorten the life of a sensor to leave it on all the time. Actually a sensor will go bad from not being used as quickly as it will using it, so you might as well use it as much as you can while you can. Most sensors have a shelf life of about 2 years, and some claim up to 10 years, but that is subjective. After a couple of years, a sensor will loose it's ability to register correctly, so it is a good idea to calibrate a monitor at least every three months or so - depending on how much you use it. The more you use a monitor, the more it should be calibrated, but probably not more than once a week, and more than likely, if you use a monitor 24/7, it should probably be calibrated once every two weeks.

@@____Ann____ There is NOTHING about this fake monitor that I would trust, not even the particulates - NOTHING. I do not recommend anyone to buy the fake monitor. The yellow Smart Sensor CO meter is great, and as far as CO and CO2, those are the two MOST important readings to know, so I would not consider knowing particulates over knowing CO and CO2.

@@DHEGRecords So I am assuming that now you are able to access the files on the glasses. If you have access to a pc, try to play the videos and photos on the pc to limit the problem of the black files to your chromebook. If it is only your chromebook that the files won't play on, then it sounds like a codec issue, and you will need to update your chromebook with the latest codecs. I hope this helps. I have never used a chromebook so am not sure I have been of much help.

You will need VLC to play the videos

@@superiorstreaming7350 Thanks for the info.

Chromebook is based on Linux, and I am not up to speed on Linux these days, but I did find the following information. Not sure it will help much, but thought I would add it here just in case it may help... How do I transfer files from android to chromebook? OK I'll save you the trouble. Here's the directions everywhere; Unlock your phone. With a USB cable, connect your phone to your Chromebook. Unlock your phone. On your phone, tap the "Charging this device via USB" notification. Under "Use USB for," select File Transfer. On your Chromebook, the Files app opens. Use it to drag files. ... When you're done, unplug the USB cable. The only problem there's is no "Charging this device via USB" notification. I have an unlocked Pixel phone and an unlocked Lenovo CB. Plugging in the USB cable gives no notification, but it does say it's charging. I'm just trying to find an easy way to put pics from my phone to my laptop. The Link to the original posting with all comments... support.google.com/android/thread/120127030/how-do-i-transfer-files-from-android-to-chromebook?hl=en I hope this helps.

@@Outside-In. thank you so much, this was very kind of you and I’m sure these instructions will help within the future for others who are confused. I did indeed end up fixing the problem; I had to push the cable ALL THE WAY into my glasses, sort of in a way that makes a snap sound but that’s apparently how it’s supposed to be. As far as the black screen goes it is indeed a Chromebook software error as both devices were probably not made too compatible with eachother. To fix this I just sent the files from my chromebook to my phone via email or google drive, my phone and every other device views them perfectly fine whereas my chromebook is just a black screen; not the worst scenario. Thank you again!

@@DHEGRecords I love it... Thinking outside the box is the best way sometimes. 👍👍👍

@B105CAFE I am not sure what you mean, but CO can not be used to know what CO2 levels are. Sorry if I misunderstood your comment.

@@Outside-In. What I mean is that CO can "transition" into CO2. And on the contrary, CO2 can turn into CO. Usually, such a transition requires high temperatures (or catalysts) so that the "transition" is acceptable in time. But even at room temperature, these processes proceed, only rather slowly. Therefore, even in a "hermetically sealed jar", the concentrations of these two gases can "somehow" change. One to increase, and the other to decrease. But I do not know how fast this can happen... I just saw some kind of picture from a chemist with a graph of temperature and partial pressures of CO and CO2... I couldn't find it quickly now...

​@@B105CAFE Yes you are right, but it is something that has to be done intentionally and not by accident... Yes, carbon dioxide (CO2) can be converted into carbon monoxide (CO) through a chemical process, but this conversion requires significant energy input and is currently an area of active research to develop efficient methods to do so. Flour is Flour, and Cake is Cake, - but flour can be turned into a Cake if enough temperature and catalysts are applied. What I am saying is that Flour can not magically become a Cake unless it is done intentionally, and likewise CO2 cannot magically become CO unless it also is done intentionally, so not exactly sure the point you are trying to make. I guess it does make for interesting conversation though :).

@@Outside-In. Hi! I now found that! :))) Boudouard reaction! en.wikipedia.org/wiki/Boudouard_reaction In this reaction, CO can convert to CO2 at a temperature (quite high). But in fact, even at low temperatures, such reactions take place, but their "speeds" are small. As I understand it, molecules of several pieces can collide and then the conditions are suitable for them and they are interchanged. But this is happening slowly... I mean, the concentration can change over time even in a closed volume. In addition, there may be some impurities (dirt) and impurities on the walls of the vessel. They can absorb or emit "something"... The accuracy of the instruments is also not ideal, the readings change by themselves. Electronic devices are affected by electromagnetic interference and other things. A lot of things can affect the readings, of course...

@@Observer_Effect I guess yes, that would be a good use for it. It looks prety cool lying in a garbage can as well 😉👍

@@joejarrell3153 Thanks Joe - much appreciated. :)

There are no monitors on the market yet that detect mold. You can get a kit on Amazon. You buy the kit, follow the directions, send in the data, and they send you back a breakdown of your environment and possibility of mold or not. So far that is the only thing you can do for mold detection. You will want to make sure you keep your humidity in check as that is where mold comes from - high humidity on a regular basis. Hope this helps.

​@@Outside-In. I recently had friends over and they have been saying my room smells bad when my Aircon is turned on but I don't smell anything so maybe I've already gotten used to the smell. I have called someone and he washed my Aircon but the smell is still there and my friends said that judging from the smell it's probably mold. I have just looked up a test kit and found one called mold armour and I'm thinking of buying it. Saw a video of a guy saying I could just put a petri dish with some solution in a room then just wait a few days to see if mold grows on it. I'm not sure if I saw this on a trusted site but I think I saw them said that the particles detector could detect mold spores. Anyways great video. Saw the fake meter online and was planning to buy it. Thanks for saving me a few bucks

@@idkname007 If you can keep your humidity at between 40 to 60%, you should be fine from mold beginning. Make sure also your filter/s for the AC is changed out to clean ones. Did your friends say the odor smelled like mold?, if so, you need to check your humidity in all your rooms and especially the basement as that is where mold is most likely to begin. The mold test will help, but just keep your humidity throughout the home at a good level so mold doesn't start.

Yes, I agree, these devices are pretty cool, and especially since they will fit in your pocket basically.

It is an option I choose when uploading a video - to have another video suggestion by RUclips. It should just be clickable by default, there is nothing I have to do to make it clickable. I will have to see if I can fix that. Thanks for bringing that up. 👍

Ok, that is weird. I just went and watched the video, and at the end I just clicked on the video suggestion and it took me straight to it, so it is working for me. Just click the video that is showing and it should take you to that video.

@@Outside-In. Thanks Steven!

@@bobrooney-elder You are welcome Bob. I feel that I may have misunderstood you. You were probably asking how to add a video link to a video and make it clickable?. Anyway, when uploading a video to your channel, you have an option to add a suggested video to the end of the one your uploading. Either you can choose a video to add or let RUclips pick an appropriate video. 👍

Thanks for the comment Bob - much appreciated. 👍

@@Outside-In. I think you know I'm not an Apple gent but I like to watch you perform. It helps me.

@@bobrooney-elder This isn't just for Apple, it works on Android as well, it is just advertised as Apple, and I guess it is because of the lightning adapter... :). 👍

@@Outside-In. I should have noticed that.

@@bobrooney-elder 😊