Видео

Yes I think some of the specialised Train sets can make for good investments. Nice tip!

Creating this garrison was quite a while back! But yes it was satisfying, I do recall though that lining up all the Minifigures 'exactly' so they were evenly spaced and all directly facing to camera was painstakingly difficult! ...sure thing I'd love to see what you create with your garrison & tower 🙂

Hi Mark, thank you! I did buy the Mercedes AMG One, but I'm time poor at the moment so I don't have the ~40 hours the build + video + photography would take to make a review video on it. Sorry! That said I have committed to CaDa that when they release Suhwan Ji's Lotus model I'll do a review video for that model. : ) instagram.com/jmt_lego_automobil/?hl=en

Hello there! I wish I could help but as I can't see your model I've no way of understanding what the problem may be. I suspect you may have made a minor error in the early phase of the build where all the Technic work is done. Have a look at your original instructions from Lego, all the steps with Technic elements and see with your model where there may be an issue. Best of luck!

@@CraftedBricks Hi thanks for the answer, I just double checked the instructions and I followed step by step all the past until I understood the cause of my problem, apparently when I put the car in flight mode the gears turn less than I should, I think I will contact lego to have the part replaced because following the instruction manual I mounted everything in the right way.

No they don't at all. I have my model in Truck mode on display and all is ok.

Thank you Lubomir and I'm so pleased to hear you are happy with your enhanced model! I've sent you a reply on Rebrickable as well. : )

That is so kind of you, thank you for your comments. It's reading comments like yours that makes me think I'll keep going with RUclips. I now don't think I'm going to be 'successful' with RUclips, I'm too niche and don't have the time with work to be making videos weekly. But I'd like to continue publishing videos from time-to-time that I hope help and add value to our Lego community in some way. Have a superb rest of your week!

No problem at all, I'm glad the advice and ideas gave you food for thought. As to your question, I would not recommend in investing in mid-sized sets from Star Wars, we see too many re-releases and over the 10+ year timeframe you'll likely be stuck with old sets no one wants anymore. If you are thinking of investing I think invest in some of those niche pop-culture popular sets could be an option, I'm thinking the Back to The Future Time Machine, Optimus Prime, etc. But I feel odd giving advice on what to invest in these days as I'm not into investing in Lego anymore.

@@CraftedBricks thanks for the info and quick reply👍 ye I think the risk of re releasing of sets makes this a no go for me so I might look for something else. And I appreciate that giving investment advice is dodgey haha

Some solid points there, thank you for sharing. I fully agree with you on the it being an investment that's not quick or easy to liquidate. There are far better investment options out there that's for sure. Have a superb week ahead!

Hi there, for my mods for the trailer you will need to view my model file Studio on your computer. I'm pretty sure you can't view that file on your phone. Also the parts list for the trailer mod and parts for my head mod are in the two .xml files in that Google Drive folder. You'll need to use those to create a wanted list in BrickLink to order the parts. Here's a link to where you can download Studio. www.bricklink.com/v3/studio/download.page I hope this helps! It's a superb mod and build I think you will like it.

No problem. It's actually often a quandary for me which colour term to use when I'm talking in a video. Lego uses 'Light/Dark Stone Grey' to refer to the grey colours in their palette. Whereas BrickLink uses 'Light/Dark Blueish Grey' when referring to the same colours!

No problem at all and I'm glad you went through with this and modified your set!

@@CraftedBricks I'm waiting on my bricklink order to arrive so I can start the build. The store I ordered from had 78 of the 83 pieces I needed. So it should cover the majority of the rainbow bits.

I fully understand - these old school Technic models have a lot charm and fill that nostalgic spot. It's often hard however to get these older parts in new-like condition which is why I rebuilt the original with new parts, and some parts, like my tires and hubs are originals!

It's always good to hear from a satisfied modder! 😀 ...I'm glad you liked the upgrade. I'm actually most happy with my mods for the UCS Landspeeder, with the fixes for the A-wing coming in a close second. Perhaps future projects for you?

Maybe this will answer your question: I recently pulled mine apart, with the intention of building The Brick Frontier's version at some point in the future. I've kept the launch platform, but I'll have to widen it, and I intend to re-use as many of the fuel tank & booster parts as possible in the rebuild. So for you I highly recommend to go all-in and build the Brick Frontier's models. 🙂

@@CraftedBricks Appreciate the reply! Cant wait to see an update video if you plan to do one. For sure leaning towards the BF version :D

@@CraftedBricks I have another question. Do you have a parts list of the pieces you used for your improvements?

@@XxTeam48LowesXx Hi there, sorry I don't. The changes I made were free-styled and I didn't keep a list or mock-up a design. Sorry I can't help this time.

You can if you want! A link to the Rebrickable page where you can purchase instructions and learn more about the build is in the description of the video. 🙂

Sounds good, note CaDa now have a non-motorized version of this model. Check their site, it's the blue coloured one. Remember to use my coupon code to get 5% off!

@@CraftedBricks what is your coupon code again ? Also I'm in Canada and it's going to be in the $300 mark so is it still worth it,in your opinion?

@aliant04 - I think the newer static version is the best option. It's slightly cheaper than the motorised version too. Yes very much worth it, I think that V12 Hypercar is the best of the CaDa models that I've built! Code is CADA5%CraftedBricks

@@CraftedBricksI love your reviews! I ordered this set and have one quick question. Do you recommend replacing any of the technic pieces with Lego pieces? If so, can you please let me know which ones? Want to be ready to build when it comes. Thanks and keep up the awesome reviews!

@@willmay8319 - Hi Will did you see the part in the video were I say there was an issue with CaDa's 1L axle with 2L pin parts? I recommend you order the equivalent Lego part ahead of your build, the Lego part number is: 11214, in Dark Stone Grey. I can't tell you how many to order exactly as I don't have the instructions for this build anymore. But if you have other projects and don't mind having spares, maybe ordering 100 in advance could help? I can't tell you whether you will have too many or be short, but I think using the Lego parts for the seats and some other key areas of the bodywork where those parts are needed, and CaDa's pins of that type for the main structure will be ok. All the best with this build it is a lovely model, I still have mine on display and I'm looking forward to the next set CaDA release from this designer.

That's an interesting take on things, thanks for sharing that insight. I think may definitely factor into how much demand there is for certain sets, adding to the risk that some retired sets may be difficult to sell, or at least difficult to make a profit on.

Haha yes that's an Australian saying or term, I'd forgotten that I must have said that in the video. So your comment and reminder made me smile and laugh when I saw it, thanks for posting!

I really appreciate that you took the time to check out my articles and commented. Thank you. I'm working on new post at the moment, but my thinking on posting every 4-6 weeks may have been idyllic! That's ok, maybe I'll follow the mantra of 'less, but better' and not worry about having to post all the time. Have a great week!

Hi Lachlan, I've received a few messages asking if I could look at addressing the studded panels and fix any visible off colour parts. But I'm not sure I have the energy for it. But your idea has merit! No promises yet let me have a look at it over the weekend and think it through 🤔

@@CraftedBricks Thanks Simon! Yeah I thought it'd be a good idea to upgrade the TIE Fighter since it now looks pretty dated after the TIE Interceptor reveal. I'm keen to try my luck at it by buying two of the set on release day and reselling the gift with promos.

@majora56 - Hi again Lachlan, the more I think about this the more I like the idea. I'll need to wait till Lego release the instructions for the interceptor so I can model it all up in Studio and mod the structure to do it can lock into the Tie Fighters panels. Also no need to buy a second set, what I'll attempt is to re-use as many parts as possible from the standard Tie's cockpit so you and others who want to do the conversion only need to buy the delta of missing parts from BrickLink. 🙂

@@CraftedBricks That sounds incredible! Thanks so much Simon I very much look forward to seeing the instructions drop and your MOD of the UCS TIE Fighter.

Hey Lachlan, I finished modelling up the enhanced UCS Tie Fighter with the new cockpit in Studio. It looks great! It has this 'bruiser' quality / look to it now which I love. I need to order parts from BrickLink and test the build. The wing panels needed significant internal adjustment for them to integrate with the new cockpit struts, but I've made it work and I think what I've come up with will be strong. I also need to figure out adjustments to the stand...

It has been a while, thanks as always for sharing. And your comment made me laugh! I do plan to look into the Interceptor, but I need to wait till Lego release the PDF instructions so I can use them to model the cockpit section up in Studio to properly see what's going on! If you look at Brothers Brick review and the photos posted there is certainly a lot of multi-colored parts in use, but it looks like they may be fully covered up with this build. We will see...

Hi there, the music is by Scott Buckley - his Ultima V title music re-orchestration. There's a link to it in the description of the video 🙂

@@CraftedBricks now I see. Thank you! Wat an amazing song. Blew me away.

Interesting idea Darren, but painting Lego is actually more difficult than it would seem. I've tried it and it's hard to get a clean good finish and to exactly colour match to Lego colours. By far the easier approach is to swap the parts out. That the great thing about Lego, if you are not happy with a finished model it's relatively easy to mod and rebuild it.

What a superb and well crafted comment. Thank you for sharing your thoughts JK! I'm glad I was able to share some ideas with you that may give you pause for thought and think through maybe adjusting your Lego investing patterns. It is a 'sticky' thing to let go of, I know I struggled to completely stop buying sets to invest in. But I've had much more and easier success with investing in other things like ETF's on the stock market. As for your thoughts on investing in Lego being bad for / not helping the environment. That's a very novel but on point thought. I think with the world progressing as it is we all need to think about ways to be less of an impost on the Environment. Even our small actions can make a difference, you've given me something to think over today, thank you!

Lego is releasing an new UCS Slave 1? ...this model in the video is the UCS model which is as close to minifig scale as Lego has produced. There is a custom one on BrickVault however that is better, have you seen that?

@@CraftedBricks yes I have seen the brick vault model but I thing that Lego is gonna remake this because this is close to minifigure scale but it’s still too small.

Hi Jeff, it's been a loooooong time since I looked at this in detail. It looks like you could go with Black for those 1x1 brackets but it could be something to do with later stages of the build of the body. I honestly can't recall. If the model is looking good to your eye keep going! Black, Light Blueish Grey and Dark Blueish Grey are all on scheme colours.

Now that's a comment! Thanks for sharing your thoughts Carl. And I'm glad, post mods, you are happy with your Lego Ornithopter! I'm surprised that you went with that choice, given you clearly have the skills / knowledge to build the custom one, but hey it sounds like you are very happy with your end result. All the best! Simon

Thanks Sylain! You are looking at an ~11,000+ part build, 14,000 parts with the tower variations. So yes reasonably expensive to source the parts from BrickLink but not out of reach. Lots of people have bought instructions and successfully built this for their own collection!

@@CraftedBricks Honestly congrats because it's leagues ahead of 10305 or even Mountain Fortress from bricklink in terms of mass and details. Your creation makes me realize why official Lego can't venture into this level of construction. The thick courtyard with life happening around the fortifications is just magical for any Lotr, song of ICE and fire, eragon fans 😍. So accurate. Apart from the unknown Price before buying instructions, it's a pain to source the parts both from pick a brick and bricklink. You have to be organised 🤣 Maybe one day... But again congrats, it's a dream project.

I had similar problems Geoff! The underside center of the Booster dishes (2x2 anti-stud) rests on the 2x2 round bricks (or did I use plates I can't remember) of the platform center supports under each booster. And yes like you I had to adjust the mounting position of the Shuttle on the main fuel tank to ensure the rear edge of the shuttle cold rest correctly on the extension coming off the twin pylons of the platform. Funnily enough over the weekend I accidently knocked the whole thing over! I caught it mid-fall but I'm actually going to take it all down, pack it away for now and eventually re-build this going for The Brick Frontier's fuel tank and booster set-up so the whole thing is properly integrated. I'll need to rebuild the platform too. Job for a future Simon! I'm glad you got this project completed!!

Thank you for letting me know about there being a fixed/modified version of the standard model. I've had a look at it and I think Thomin has done a great job with the changes. People often ask if I'm aware of modified or improved versions of Lego models so I'll refer people to Thomin's page if they ask. Much appreciated! (As for the comparison video unfortunately I don't have the time/capacity to make that, it would be a crazy amount of work + involve me buying the original set + mod parts etc.)

@@CraftedBricks No worries! I appreciate you looking into it. I adore Dune but wasn't a huge fan of all of the exposed technic pieces on the official set, this Thomin's mod makes it exactly how I wanted it.

Thanks Copernicorn much appreciated. I'm happy with both the video and the build this time! : )

Thank you! It turned out well, have a superb Sunday!

It always puts a smile on my face when I see a comment like this! I'm glad I was able to help and that you are happy with your modified model. All the best...

@@CraftedBricks You know, I gave the model a second look, and since I had the parts I tried out the suspension mod. You're right, it makes the look of the car much better. Thank you so much!

It sounds like you are a 'Collector' versus Investor. But what a collection you must be building if you are taking precautions to protect your sets in acrylic boxes. All the best with it!

Oh I whole heartedly agree, CaDa are doing well and are really making an effort to improve and bring better and better models to market. I highly recommend you check out their website and products, particularly the 'Master Series' line up! 🙂

Thanks for the heads-up on Maydayfigs Lachlan. I watched several of his videos, he's very engaging and smooth delivery style. And has narrowed in, as you say, on an interesting niche!

Thanks Robert, I hope you had a superb Easter break. I'm back and working on edits for a new video as I type this : )

I'm glad you think you so, and well, it would be a challenge if you are new to building custom Lego models, but not insurmountable. I'd recommend going with this option if it is a project you'd like to take on (+ the launch pad by the same designer): rebrickable.com/mocs/MOC-76210/TheBrickFrontier/nasa-space-shuttle-discovery-10283-external-fuel-tank-srb-addons/#details

Agreed! There is something special about the 'golden age' of this era of Lego Technic sets. I actually love the semi-exposed internal technical elements on these models and you can 'see' how they work. It would be great if Lego could do a modern era set but in the style of some of these older sets. Thanks for sharing!

I'm glad this helped!

Thank you! I'm just working on a new video now, and I'll write up the next article in a few weeks! Thanks as always for commenting and being positive Wizard of Bricks, and I hear you, there's so much more joy to be had building custom Lego models versus standard Lego sets. : )

Near impossible given the technic construction to allow the wheels to flip to the horizontal for 'flying mode'. But you could try to figure it out. I personally see no need to add the ability for the front wheels to turn as once you've built this model you pretty much have it on static display. Since building this and mounting it to my stand I've not touched the model ever!

Hi Anthony, I explain my roof mods / fixes again in this video: studio.ruclips.net/user/videoGk7j9mC527U/edit ...and provide some extra information about the mods to answer commonly asked questions. This may help you. As for the lowering mod as I explain in the video its by a German MOC designer so that's why the link to the instructions goes to his site. You don't need to read the content of his site just select the bottom link to download the PDF. The instructions and mods are very simple. Super easy to do. Also if you open the link from Rebrickable in Google Chrome, select the 3 dots in the very top right hand corner, then from the menu select translate, then English, Google will translate the page for you. This may help. All the best!