I recommend starting with the lateral arms. First, start by undoing the brake cable bracket from where the lateral arm attaches to the châssis. Also remove the gas tank plastic cover to make some room to work. The lower bolt on the knuckle side can be stuck and will have to be cut. The rear facing trailing arms are pretty straightforward. The front facing trailing arm are a bit more difficult. The bolt on the subframe side are too close to the gas tank, and there is not enough room for them to come out I recommend lowering the subframe to have more room. Finally, you will have to order the bushing separately because they don’t come with the trailing arm or the lateral arm. You can only bu...