Видео

@@has20100 no worries!

Hi again thank you so much your video got it worked but this time when I hit the throttle the speed limit is not showing on the display any help on that I have video of it can I send to you so can see what I'm talking about thanks

@@sheron2265 ask away

Where do I buy the port from besides online I want to get the 3 prong like you did

@sheron2265 Ideally if you have to replace the charge port you want to replace it with the same port that came with the scooter...that way it fits into the space on the chassis they designed it for.

It's getting better...but yeah...I wouldn't wish this on my worst enemy.

@@therealcmplx Do yourself a favor if he haven't had surgery, buy an inversion bed/table and use it to stretch out your spine. You don't have to use it as total inversion, I do mine about 60-75 degrees and it just takes longer but dang it feels great. I've had a bad back for years did chiropractor and various exercises was about to breakdown doing meds or surgery until someone suggested this. I bought my first one from walmart but when I moved I decided to go used and bought the second from craigslist at the time, best investment I've made and at first did it a few times per day for 1-3 minutes but now I can go months before needing it. If you have a friend or family member that has one, try it out, and hopefully this fixes it for you.

Bro, I'm learning that the hard way right now...lol.

@@JayZona520 1 Pack Solid Tire,8.5Inch Electric Scooter Wheels for Xiaomi M365 Gotrax/gxl V2/XR Scooter Accessories,8 1/2'' Front/Rear Rear Solid Tires replacement wheel a.co/d/dknuwvS

@andrewwright5406 I meant to do an update on this but you're absolutely right. I put a new switch on it with the ground on the brass plug and it worked no problem!

@ yeah, thanks for blowing my switch !!!

@andrewwright5406 huh ? I didn't blow your switch out. When I received it from my customer it was wired that way. I got a new switch and controller and referred to the wiring diagram and that's what fixed it.

@@JayZona520 I have a c35 here that I'll be doing another ture replacement on. As soon as the customer brings me the parts, I'll show you on video how to do it.

@therealcmplx I actually just remove the rite and rim earlier but I was trying to find the upgrade airless tires. which I hope I got the right one. It appears you have to order them separately for the front and back but given I only needed the rear I went ahead and jaut purchased that. I also seen that you boil your upgraded tire so tomorrow when I get this tire I hope that makes it easier. Is there a estimated time for how long I boil it for and do I install it as soonest I remove the tire out from the boiling water. ?

@therealcmplx I actually just remove the rite and rim earlier but I was trying to find the upgrade airless tires. which I hope I got the right one. It appears you have to order them separately for the front and back but given I only needed the rear I went ahead and jaut purchased that. I also seen that you boil your upgraded tire so tomorrow when I get this tire I hope that makes it easier. Is there a estimated time for how long I boil it for and do I install it as soonest I remove the tire out from the boiling water. ?

Done!

Not sure why it did that...

@JanaFields-rz6hb I'm located in kern valley, California. Have you gotten the issue taken care of ?

@@JanaFields-rz6hb I actually just remove the rite and rim earlier but I was trying to find the upgrade airless tires. which I hope I got the right one. It appears you have to order them separately for the front and back but given I only needed the rear I went ahead and jaut purchased that. I also seen that you boil your upgraded tire so tomorrow when I get this tire I hope that makes it easier. Is there a estimated time for how long I boil it for and do I install it as soonest I remove the tire out from the boiling water. ?

You don't have to separate the wheel over from the motor. Just pull the old tube and tire off and put the new tire on.

​@therealcmplx how do you get the seater screw from the tube to rim

Cause there is a screw around the valve

@@lordzylo3768 ohhh...ok. I had to use a pick to unthread it off of the valve.

@@stephaniebarber1965 Thank you. I'm in the Northern part of Southern California...plenty of wildlife to become friends with.

I just got another c35 in for repair. I'll make another video when I get started on it.

@jerrywest3113 how is it false information if you can clearly see I replaced the tire ? Do you think I lied about how I did it ?

@The_Cannabis_Connoisseur I have one of those as well. I can tune a chain drive...that's what I like about it. It's no different than what I used to do with racing karts.

@THEAVERAGEGUY1983 we're all good...but yeah...

Thanks! I'll keep you all updated!!!

@miguelmalando7066 I used to be. I'm about an hour and fifteen minutes away in kern valley / Bakersfield area. Do you have a Phantom GoGo scooter ?

@@MrFredy428 I would only put the same size tire on as it could cause clearance issues.

@@therealcmplx I’ve only had luck finding 8.5x2 solid tires. Do you think those will work? I have the same scooter.

@@Codexbleu I only advise going with the same size tire. Here's a link to it right here: www.amazon.com/Honeycomb-Compatible-Ninebot-Electric-Accessories/dp/B0BDDVMLGZ/ref=asc_df_B0BDDVMLGZ/?tag=hyprod-20&linkCode=df0&hvadid=693769127177&hvpos&hvnetw=g&hvrand=9050016935835973493&hvpone&hvptwo&hvqmt&hvdev=m&hvdvcmdl&hvlocint&hvlocphy=1013570&hvtargid=pla-2246837878468&psc=1&mcid=f673895679d635b89fff276a07759800&gad_source=1

How did you get the screws under the plastic plates off? Mine won't budge.

I think this is another one of those times where as soon as they saw it wasn't working, they just stuck it on the side of the house and said "I'll take care of it later"...lol. When later got here, it looked like that.

@DimitraRetsina-w8f I appreciate you so much for this!!! I'll take your advice and give this another go tomorrow!!!

​@@therealcmplxHello brother! I hope all Good with. I'm here to ask if u solve the trotter problem did u make it works??

​@@eduardojazusmartinez9845 I did! Here's the video I made showing how to make it work ruclips.net/video/0Oq1gjTleSo/видео.htmlsi=IlPyVnHqD2QSGZoj

@@therealcmplx thank you

What would be easier is to just make it a rear motor scooter and remove the front motor and just replace it with a regular rim and tire. Cuts the electronics in half.