Видео

Phenomenal video, great job thank you for posting this

Does it compatible with the cars park sensor ?

arent there two pressure switches? I keep seeing parta sold with lower and higher bar specs and don’t know which one I need.

Very good video.

Super helpful, thank you!

Did this fix your issue?

I’ve had this installed for about a year and a half. And it just recently started freezing up at the Dasaita screen, it just sits there for about 10 min then reboots. After about 3 reboots it just shuts off completely. I disconnected the battery and tried a factory reset and still no change. Any other suggestions to get this thing working again? I tried accessing their website but it never loads are the still in business?

Best and easiest video of this repair on RUclips

Good job men !

Supposed to do both sides before putting on the last two pads

Thank you for the video! I’ll change the blower motor in my Pilot this weekend.

How many quarts came out and did you put that exact amount back in? Thanks anybody

Do these have high and low in the bulb?

Also be aware that the edges of the filter are inside the "lips" of the filter holder (look from the bottom). If it is not place correctly their is going to be a gap between the holder and the filter.

Do i need to use that special tool to compress the brake or can i use something like a wrench

You bought the catalytic converter in Amazon did it came out good

If you have the right turn signal LaneWatch on your Honda Accord and can't get it to work there is a separate attachment. It will be an extra set of cables with labels like "GND" and "Front Camera." The "Front Camera" cable should be yellow and you will want to plug that cable into "BSM VIN." The extra cables will connect into the Dasaita head unit and should plug into the second from lower left pins (If you're looking at the tablet from the front screen." After plugging "Front Camera" and "BSM VIN" together, your LaneWatch right turn signal camera should work. Cheers.

If you have the right turn signal LaneWatch on your Honda Accord and can't get it to work there is a separate attachment. It will be an extra set of cables with labels like "GND" and "Front Camera." The "Front Camera" cable should be yellow and you will want to plug that cable into "BSM VIN." The extra cables will connect into the Dasaita head unit and should plug into the second from lower left pins (If you're looking at the tablet from the front screen." After plugging "Front Camera" and "BSM VIN" together, your LaneWatch right turn signal camera should work. Cheers.

Can you clean the throttle body next ? Thanks for sharing DIY videos 🫡

Dang, what a terrible design. This is gonna suck

Oh nah I’m seeing all these problems and I’m not interested anymore. I just want a simple CarPlay solution . Any ideas??

Factory says only 1\2 a quart of gear lube

Worst purchase ever my CarPlay don’t work no more and it stops the music when I put the car in reverse

47 ft lbs is 8 ugga duggas, 34 is 6 and 7 is like half an ugga dugga

Purchased a 2017 Accord with a bad rear camera. $39 from eBay’s for the new camera and 20 min to replace. Excellent video with clear guidance. Dealer here in Bellevue WA wanted $950+tax to replace. Highway robbery. For the corner clips, I just removed the 4 nuts each for the light modules, unplugged the lights, and pulled them out with the trim piece. Thanks for posting!

Thank you. Great instructions. All went to plan. The most difficult bit is getting the fascia out. I ended up using a crow bar with tape over it and breaking one of the clips. But I glued it back.

Why do t you remove the DIY app advertisement so we can see everything?

Yeah I’m going to the dealership 😂

mine bricked in 6 months

What is Quick about this?

I opened my transfer case by accident trying to do a transmission oil change

Does the top of the screen cover the other screen??

Thank you, I did it myself and save money

Does this apply to a 2011 Camry hybrid?

The most helpful video I’ve watched for this issue, great job Dude .

Did you lift up the car?

Excellent

Good job

i see backup camera is not really accurate like original image seems reversed

For those who don’t really care n r just putting a shitty 20$ filter in all u gotta do is take the plastic cover off that covers the hole for the filter (clips on at the bottom and top) You then pop those clips out that are holding the wire in place ( I only had to take 2 out for enough slack) with the glove box fully down and holding the wire as high up as possible you shove tht filter in there focusing on the bottom first as the metal brace is in the way then the top (the filter will crinkle and bend but will spring back into normal form once it’s fully in the housing). Took me 5 mins all I needed was a flashlight, blow gun and a small flat head screwdriver for the clips.

Just replaced mine in a hour or so! You made it so easy to follow. Thank you!

Lol My 92 civic eg. doesn't has cabin filter ?? !

Following this installation steps, I install the scicane but the reverse camera was only showing on the dashboard board not from the scicane screen, how can i make it show on both screen. Secondly after installing, if i navigate to the right, it will show the reverse camera on the scicane screen showing the back and radio or if am on call will stop working until i remove back to drive. What can i do?

I was going to buy it, then I found it was $120. Then I saw a decent one with a 4.9 rating on Amazon with 120 W and 45 LPM, and it cost $62, so I bought two of them. It's slightly weaker. The Lasfit tk1 is 135 W and 50 LPM, but the cheaper ones are still decent, tho, and both of them will inflate 2 tires in under 5 minutes for $124.They have better batteries and portable too! The point is it's too expensive, tbf I wished it was $85-$100 that would've been reasonable price.

Does the side mirror camera work or since the CarPlay is installed it won’t show?

Do you happen to know the part number for the the flat mount? I’m chasing that part 😢😢

Very helpfull, thanks ✌️

My indicator is red, and sometimes the oil indicator will turn off and on. Once I reset the maintenance indicator, will that stop the oil indicator from flashing?

Wow, you do a GREAT JOB!! You just saved me tons of $$$$

I had a thought if i could replace this and sure enough it doesnt look too hard