Видео

So after seeing the comments on here first ya you should kill it to refill the gas tank but I've always used any generator running while I've refilled it to full or almost full as the vibration bounces the gas around so you can't get an accurate reading on how much gas is in it plus if you had any kinda spark at all you risk catching the fumes and blowing the whole thing sky high but normally if your not leaking gas all over or anything you can generally get away with a quick refill but second thing you shouldn't ever start your generator with anything plugged into it as you risk destroying the voltage regulator part so I mean ya the engine will start and run but you won't have power coming off it same thing with when you shut it down you should aways shut down whatevers plugged into it and then shut off the generator as it can kill your voltage reg and then 3rd ya you can run a generator during the rain however the best suggestion I can say is to either build a shelter around the top and sides of the generator but just make sure it has enough airflow to blow the co2 fumes away as most of the new generators out there have a co2 sensor shut off safety mechanism on them so if it gets to much co2 fumes it will shut down untill it reads the co2 level is safe enough again but my general thing is ill make a shelter over the top and then ill leave the front part open and about half way down all sides of the shelter while keeping the exhaust side completely open to make sure it doesn't mess with the co2 sensor at all but most shelters I've made over the time have been out of 2x4 and plywood so they've been log enough for me to lift up and off the generator in order to refill or check whatever I might need to but definitely want to cover up the airfilter box pretty well and the plug in area to avoid shorts from the water or getting any water from getting sucked up into the airfilter box and into the engine which would cause the generator to shut down until the water either dried up or you toom the spark plug off and blew it out inside the piston and the air box to get most of the water out of there before it would start up again oh and also for the second thing I forgot to say you also risk messing up some electric items as when the generator starts up it's not a constant voltage which can damage or destroy your items sometimes not always if not destroy the voltage regulator which is also why you want to shut everything down before shutting off generator cause it can affect the amount of power the generator pushes out over time. These are just my opinions from my personal perspective and use of running and working on these types of things so if I'm wrong on any of it feel free to correct me weather it be the parts name or whatever but I've been using and working on these types of engines and that for about 10 years or so now so I'm pretty confident on what I'm saying on here but if I am wrong I will say it's mostly my opinions and alot of it is fact which cam be found online or at your local store which sells generators so if it causes any issue with you I'm just going to say you can't hold me accountable for any of it however just about everything I've said is fact online which can be found via Google or whatever search engine you prefer I guess so don't try commenting me that I owe you X amount for damage or whatnot like that yall lol

Cuantos galones tiene

I have a husky z242f. I love it. Yours has a suspension. I’m a little jealous when you go over bumps. Cool video;))))

I need to find a good dealer ship w used 4 wheelers

Put a tourqe converter on it you will be impressed at the power difference

I have this bike and wondering how the fuck to take pff the chains. Im blown away at how hard it is :))

It is going to be a wonderful home. You have a wonderful family and you deserve it. Say hi to your parents and brother. The Olsons in NC

Kyle, where are you building your house ?

Very nice!!

Are you putting in a wood stove in the new house

Gorgeous! I’ll be living right down the road so I might have to come knocking and see the finished product eventually 😊

Nice mower

When can you to some firewood with the atv utv with trailer in the woods

Hey is it a good work truck?

Great job buddy, appreciate it. I have 4 lil ones and I’m going to get one 👊🏼

Why do you keep lifting the brush hog? Mine stays down the whole time I'm mowing, that's why it has a swivel wheel on the back.

You pulled the beer off the floor bed hahahahahhaa.

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2023 CAN AM COMMANDER 1000XT

that thing sounds mean

what scope are you using? And what range can you reach with it? Nice video🥂

How did you plug your refrigerator into the generator? I need some tips ("I've never owned a generator).

Hello, Are you interested in testing our products? We would like to invite you to test the 2.5" Lift Kit for your CAN AM DEFENDER 1000 XT (if your car year is 2017-2020)

m.ruclips.net/video/B74-DrXA5JM/видео.html

Great pointers!! Thanks a bunch! Just got one completely clueless but after 1 day I've learned a few things!!

Thats a sweet truck right there. I always liked the 460's, especially the EFI models in the 90's trucks. Best sounding engine built in my opinion. A local farmer had a lifted 90's Ford with the 460 in it and it had a straight pipe exhaust. You could hear that thing for miles, no joke. I almost bought a 93 F250 with a 460 off of Craigslist, but decided not to and am still looking for a better daily vehicle. Months later, I made a visit to the local junkyard to pass some time one day, and found that same 93 Ford in the junkyard, which made me sad. I eyeballed that 460 for at least 5 whole minutes lol. The road salt and winters really kicked the snot out of these trucks here in Upstate NY, there's not many of them left. But I may be buying an F150 with the 300 in a couple of days. Hopefully I can get it

Absolutely marvelous. Very, very well done. Awesome tractor and grapple (I have not seen one like that). Great operator skills, and well shot and edited video. Beautiful and well trained German Shepherd. Lovely property. Thank you so much. It's hard to get a better video than this for a compact tractor owner /You Tube viewer. Hoping to see more. Best to you and your family. R. Henry. M.D. (L2501 owner from the mountains of New Mexico)

I had 4 come down in the same storm. Still working it

Nice sled good buy. We were not able to ride this year, no snow. Your little dude is awesome. Smiling ear to ear. Good stuff. We love the ski doos as well ! Dave

Damn too bad about the wood shed, that storm sucked brother. I swear we’ll be into May cleaning up the wind damage.

That sucks ! Mother Nature is full of surprises. 😮

😮😮

Hey fellers. What part of Vermont? Im in Lyndonville 😊 3:27 gotta buckle up for safety, while holding a Coors light 😅

i can't.....i'd lose my shit at that dog! mine would be happily riding in the back.

Looks great 👍

How is the sap running? My bush is up in Topsham. Have not been able to get back to Vermont.

How much wood can you get with the utv and the trailer

Thanks

Looking good guys…get ready for the warm up this week..stoke that fire and grab a frosty. 🔥🍺

good vid dood!!!

I lived in Stockbridge VT. Moved to TN. I miss sugaring.

you need to get a bigger shack or move the stuff around the one ya got!! how many taps ya do? i cant get to my sugarbush this year so doing it in my garage with the three trees in my yard and two pots on a gas grill keep me from going crazy tho

Gonna be running today.

This makes me smile..Grew up in Southern VT....Readsboro to be exact. I miss this time of year back home

A lot of hard work making Maple Syrup good job

Only got about 4 tanks in and i love it so far came with 24 inch bar...and i dont know much but you should let her warm up and no reason to rev her like that

Just bought a 2019 F350 with the 6.2. Mine is the crew cab long box. Love the 48g tank.

I was about the same age as the little boy when I had my first snowmobile ride with dad. Dad's gone now but 52 years later still sledding.

Love your video! Wondering if you're interested in reviewing our sxs or atv accessories? Plz share your contact info we'll send you details.

Good video man. I wanted this same rifle in .308 since as long as I could remember, so I bought a brand new ones last May. Super disappointed with it. The butt stock came loose after 3 shots, the bolt head was loose and you could move it around with your finger, and when the bullets were loaded into the magazine they would slide back and forth making a loud rattle sound. I sold the damn thing. Must have been one they pushed off the line directly after Covid to get numbers back up. Going to try again this year to buy another in 243 or 270. Hope it works as good as yours!

i own this saw it's been good so far , one thing about this saw it has auto tune , you need to let the saw warm up so the auto tune can adjust and after about 5 or 6 tanks of gas it will come alive and run better , Good video take care .