Видео

you must go to the section of remote learning and follow the instructions

What error do you get?

@@CODING-FOR-YOU I was referrig to your video, now I've noted the error on the cluster was there before you even started, I had thought it was caused by the key programming

Yes.

He forgot to mention if you what to add yout id48 chip you must precode the chip for daewoo id48 the only machine that i found to do that is zed bull china clone.I just added a key today with lonsdor.

You can generate transponder with VVDI mini key Tool, just take a New 48 chip

I am sure it would. Up to 2023 is the same as far as i know.

J'ai utilisé des clés OEM, mais il devrait également y avoir un marché secondaire.

Up to 2017 European models works fine.

Chip 83.

Yes, i had the same problem with autel on some suzuki based toyots vehicles. Could not read the pin code from the suzuki ertiga that is basically a rumion in toyota. But we will see what the updates brings us in the future.

On some kia models is will.

it is possible if you remove the immo box and write directly to the epprom, but i will need to make a video on that. I soon as i get one i will make it.

Cause I am kinda curious if you select the rest immo options what could be the outcome

This polo system started at 2005 up to 2019. This is a polo vivo.This is a 6S polo. The systems started with 6n, 9n and 6s. 6s started at about 2010 up to 2019. The new polo vivo with 6R vin started at about 2020. The only problem is that the machine does not have the whole series of polos in that category, as it read it as an old system. 2005 - 2019 is actually the same system. I make video according to the vin number. The 10th number or letter was F, so this is a 2016. Hope this answers your question.

On some systems of hyundai you can extract pin codes id46 and id47 , but unfortunately this one failed. You can also buy pin code products on www.aliexpress.com

@@CODING-FOR-YOU thank you 🙏

Most id46 and 47 you will be able to extract with the autel im508 and 608. This one was just unfortunate. Cost me 80usd to get pin because of late year model. 😝 Other calculators only go up to 2016.

@@CODING-FOR-YOU man this was costly

@@CODING-FOR-YOUyes right it costs 80 tokens

I have not done the Rav4 yet, but i think it should the same.

The IM608 can program the np200, but most of the time you will not be able to extract the pin code from the car, that is why i made this video as a plan B. Same for renault logan and the old sandero. (Same BCM)

@@CODING-FOR-YOU thanks for the input. I presume the IM608 with XP400 can also do the direct bench transponder programming on the eeprom ? That's ID46 if I'm correct ?

It is possible to add a key directly, but i wanted to be sure any other old keys won't work on the car.

Thank you.

Don't think xp400 pro is needed, unless the machine ask you to connect it.

@@CODING-FOR-YOU Autel Im508 will add a key to Renault Master 2021 ??

Hello. The KD-X2 is just to pre program the key as an MQB key. If you have original or aftermarket MQB key, you only need the autel im508 or 608 to program the key. I used a KD ZB key, that is why i needed the KD-X2. You can go to www.aliexpress.com to find the products i use. Thanks for watching.

I am sure the IM508S can do this car. Just power the ignition manually.

@@CODING-FOR-YOU thanks 😊 🙏 cheers 🍻

Good day. Thank you for watching. I would like to keep my personal life separate from youtube, but you are welcome to ask me anything here.

Need your advice on 2019 Polo 1,6 sedan, tried to add a key (MQB48) but failed. I'm new to key programming but succesfully did other ID48 with no problem. Tried guided and expert mode on my new IM608 Pro 2 with WiFi connected and VCI connected by USB but still failed everytime when reading immo data reached about 80% @@CODING-FOR-YOU

Good day. First check all the fuses. Sometimes the obd2 port fuse is blown or missing. Check on the obd2 port if you have power on pin 16. If there is no power, just connect a piece of wire from the battery to that point. Please be very sure it is pin 16. I have done this on a lot of vehicles, as sometimes the power might fail to a wiring problem or faulty connection. On any OBD2 port you should always have constant power on pin16. Hope this solves your problem. mechanics.stackexchange.com/questions/25257/disabling-obd2-interface-in-a-car

Просто ваша машина находилась на штатной охране

Yes, i will try my best.

Thank you for watching. Glad to help someone.😀👍

I am not sure about the xp200.

@@CODING-FOR-YOU ok . Thank you

@@CODING-FOR-YOU so can unlock key with im 508 or xp200 ?????

@@moustaphacheva3757I use the vvdi mini tool to unlock 128bit toyota keys. www.aliexpress.com/item/1005006142740866.html?spm=a2g0o.productlist.main.7.6534pKTOpKTOwX&algo_pvid=8a5145d8-3d3b-47fe-8957-69db3a38503c&algo_exp_id=8a5145d8-3d3b-47fe-8957-69db3a38503c-3&pdp_npi=4%40dis%21ZAR%211804.47%211660.16%21%21%2196.53%2188.81%21%402103094c17099672164316996e6952%2112000035952790627%21sea%21ZA%21801030418%21&curPageLogUid=e5b8bnN9r8ef&utparam-url=scene%3Asearch%7Cquery_from%3A

2015+ will be a different range of polo. The 6n, 9n and the 6s use the same system on the cluster, so it is 2003 up to 2019. The 6R polo will be a different procedure, and the same for the tsi range. 2015+ was suppose to work on the new polo 6R range, but it does not. I did this video as the machine software was confusing to me, so i figured out the right procedure for that range of polos. So if you look at the vin numbers starting with AAVZZZ6N, 9N and 6S.

What would 2017 mqb be ?

Thanks for the info, so the 6n,9n and the 6s are all the same procedure as the one you did in this video ? @@CODING-FOR-YOU

Hello. No the machine is reading the info between the car and the key, that is why i put the old key in first.

Bravo, quel programme avez vous utilisez pour générer la clé Keydiy ?

Hi Is the kd key remote control working?

@@CODING-FOR-YOU Do you have to generate the keydiy key with the kd-x2?

@@proservices2I used the KD-X2 with with keydiy program on adroid phone.