Видео

❤thanks for your help

Good work Sir

Hi, I have same model but my issue is sometimes I lose the sound for 5 to 10 seconds and it's coming back right after, the pictures are still really great so I'm asking WICH BOARD is in cause...?? TNX FOR ANSWERING, I WANNA KEEP THIS NICE TV !!!😢

Excellent video and thanks a million good to see you again fixing these sets, I watched lots of videos on this sort of tvs but I just needed to refresh my memory so thanks a million again 😀 👍

I have a semiconductor disc, and it's made from tungsten

pn42c450 mine wont turn on with remote,but buttons work on rv.

hi where the replaced board could be ordered pl

Good video, thank you easy testing of hockey puck SCR and how is inside.

this is a fantastic show N tell video 🧐 i wondered what was inside of a hockey puck diode and now i know 😎 thank you very much.

GENIUS. thank you. after spending $70 replacing the logic board, the PS board, and another one of the boards, this video helped me figure it out. It was the exact same issue in the video! Crazy!

thank you for shearing!

great video. i have an older model and it clicks even when i disconnect x/y boards. can it be a t-con issue? or plain power supply board? i recon that this issue started progressing from whem it was ok, it started turning off and turning on by itself, and later turning off after some time of use, and wouldnt turn on (click click but no power).

What if the light is the same on both of them? Mine has both of the green lights turning on and off

mine won't come on although it comes on...tomorrow is trash day???????

sir do me same work but same condition

MY LEDS LIGHTS WONT COME ON NO PIC. FANS RUN I HAVE 325 VOLTS

Sir help me a little how to solve the problem of my one chheim tv power 3 times blinking

Thank you, I saved a boat load of money!!!

Good morning, I have this same screen, can you tell me how to buy the card on the left side, where are the igbts? you will have the part number, since the screen is perfect only this card is damaged

Exelente amigo

Hello I have same TV, however the red light blink twice in a second; five times and the cycle continues. Can you please advice what the problem could be Thank you

well i had the same problem with same panel. i could only find two boards on ebay, one for 100 bucks and the other for 20. got the cheap one, installed it myself, and now it works great. im a tv repair noob, so a little more on the removal and install in the video would have been helpful, but i managed. just wanted to thank you for the great video and for saving me several hundred dollars on the cost of a new tv. i appreciate it!

Hello new friend here po 😊 hug back

Hindi spike sir

WERE CAN I GET THAT PART.

I have thyristor infineon t2180n14t , i tested it using multimeter and this is the result (without trigger on pin G) A + , K - = 60K ohm A - , K + = 60k ohm This is good or not sir?

What you showed is easily one of the best ways to trouble-shoot a plasma TV. I recently repaired a 2013 63" Samsung that simply had lose grounding screws, which determined when everything passed but I still had the TV randomly shutting off. I did have to check the voltages on the power supply to rule out a PSU fault. I also noticed what looked like some cracked solder joints where you'd expect them, i.e. heatsink mounted components such as transistors and diodes. After tightening all the screws, it works like a charm. I know believe my other Samsung plasma had a similar problem and I stupidly replaced unnecessary components as I couldn't figure out how to properly troubleshoot. Live and learn.

Hey I can't find my power supply online anywhere can you help me?

Great detail in explaining what is going on with these. I probably can critically think about tracing through the boards to see what is going on without a schematic, though you've explained more that I was wondering about. Appreciate that and thanks for sharing! I had a bad Blue LED in the HL61A750A1FXZA and swapped with a working one from a HLT6187SAX/XAA, though same symptom. I made a video here: ruclips.net/video/FJqxb762VI4/видео.html Here's the two videos I made to show the blue LED performance: ruclips.net/video/xJjF3n3_nmI/видео.html (not working correct) ruclips.net/video/5sp8AiUuJAM/видео.html (working correct) I do have the bulging capacitors also in the LED power supply board... though with the HLT6187SAX/XAA two other modules... I just get the bad DLP chip issues like in your other video regarding replacing the DLP Chip... like the power supply board isn't the issue, maybe like a mirror controller or something? Anything else that might go bad with the video I made error front panel LED codes whatever they are showing? Thanks in advance for your time and sharing!

Thanks ok

Help! I have the exact TV as this one with the exact problem and symptoms and I troubleshot it just like you did in the video and determined that the Power Supply must be the board with the short in it. Well I bought a new Power Supply on ebay, it came in today, I installed it and I still get the flashing indicator light and the clicking noise, what do I do next, I'm determined to solve this problem and I sure hope you can give me some pointers as to how to accomplish this. Thank You, Dave

Sir can u give what name item u change....for me easy to get spartpart

Z sustain

Damn Good Video

Thank you sir! This helped me out a lot!

I have the same TV. I have a strange issue. When I powered on the TV, it turn on but stuck at only one channels. Remote control is not working and I am unable to press any button on the TV. In order to power off the TV I have to unplug the TV power cord.

This is not much of a repair. It would be better so see component level diagnosis and a fix.

Спасибо вам большое. Из России

Is there a video of replacing the board? taking it out putting the old one one the new one and back in? Is it attached to the light engine or is it off to the side where it just slides out easily?

ruclips.net/video/7-zV5W7dCH8/видео.html

Hi there, thanks for the sharing your videowith evryone , I have shut off problem with my Samsung Plasma Television 43″ PS43E490, Sometime it works for days without any problem and sometime it shut off after 20 minutes and Red Light flash 5 times, If i remove the power cable and reconnect the cable again then tv does come on. So it doesn't happen all the time. I really appreciate if you could help me to fix this problem.

Hi, I have a similar problem. With my plasma pn60f5300, when it turns on only the red light flashes, the voltage VS is of 209 volts but it is lowered immediately to 15v. Can you help me with this

thank you so much sir i'm Algerian and i respect you. good luck

Here is the deal with these sets... There is a bulletin for abnormal failure of the X sus board ( board on the right facing the back that you replaced ) due to timing issues from the logic pcb ( you called in t-con) after the X main is replaced it is imperative to update the firmware to correct the timing issues otherwise the X main will likely fail again.. Make note for anyone watching this video..

thanks

Thanks for the great video! This is exactly what happened with a TV I'm fixing. And it's the same board too. Of course, it's the more expensive of the three possibilities.

Great, simple, no frills video. I fixed the exact same model with the exact same problem in 5 minutes after buying a new board. Thank you sir, good day to you!

Mr. Leggett, I purchased two Lm2596 style voltage regulators from you a while back and I am in Houston and need two more by tomorrow. Do you know somewhere that may stock them so I can try to pick them up? I lost your card, I hope you receive this message. Thanks Mike

I'm doing what the video is telling me to do I unplugged the first one and it blinks I do the other one and it keeps on blinking what seems to be the problem if the light doesn't stay solid

I disconnected the y main and x main board yet im still getting the clicking? Would that mean that the power supply is bad?