- Видео 47
- Просмотров 156 731
Skipshift
США
Добавлен 30 июл 2021
Welcome to the Skipshift RUclips channel!
Here you'll find gear reviews, tips and tricks, and good old fashioned motovlogs.
A little about me:
My name is Jeff. I've been riding motorcycles since 2009 and working them since before then. I formerly raced quads and also spent a little time in the custom car and truck crowd. I'll ride or drive anything with 2 wheels or more, and even revive an old machine here and there.
Smack subscribe, it's free!
Watch me make a fool of myself and maybe I can teach you a thing or two along the way!
Feel free to reach out to me on Instagram or through the email below.
Viewer input is always appreciated.
Here you'll find gear reviews, tips and tricks, and good old fashioned motovlogs.
A little about me:
My name is Jeff. I've been riding motorcycles since 2009 and working them since before then. I formerly raced quads and also spent a little time in the custom car and truck crowd. I'll ride or drive anything with 2 wheels or more, and even revive an old machine here and there.
Smack subscribe, it's free!
Watch me make a fool of myself and maybe I can teach you a thing or two along the way!
Feel free to reach out to me on Instagram or through the email below.
Viewer input is always appreciated.
How a SaddleSore 1000 Changed Motorcycling For Me
After finally getting to ride 1K miles in a day this year, I have a totally different outlook on motorcycle trips. This small adventure opened the world of cross country trips to me, and made me realize that long rides are not out of reach.
0:00 Intro
0:25 Finally did the Ironbutt ride
1:28 I didn't turn in my receipts
2:09 How riding 1,000 miles changed motorcycling for me
4:57 Riding to Mt Magazine
Check out our merch stores:
A little bit of everything here:
Skipshift.redbubble.com
Shirts and Hoodies here:
skipshift.creator-spring.com
Affiliate links that help support the channel:
Using the affiliate links below may give me a commission if you make a purchase.
10% Off GoPro Accessories from HSU
hsush...
0:00 Intro
0:25 Finally did the Ironbutt ride
1:28 I didn't turn in my receipts
2:09 How riding 1,000 miles changed motorcycling for me
4:57 Riding to Mt Magazine
Check out our merch stores:
A little bit of everything here:
Skipshift.redbubble.com
Shirts and Hoodies here:
skipshift.creator-spring.com
Affiliate links that help support the channel:
Using the affiliate links below may give me a commission if you make a purchase.
10% Off GoPro Accessories from HSU
hsush...
Просмотров: 1 816
Видео
FZ09 / MT09 CLUTCH RATTLE | BASKET NOISE | GRONK
Просмотров 36 тыс.Год назад
A well known problem with the FZ09 and MT09 is the clutch basket failing, or the drive cushions in the basket failing, and making an undesirable noise under low rpm engine braking. In this video we'll go through inspecting the clutch and driven gear for these failures and what the cause is, along with installing a new driven gear assembly with included torque specs. 0:00 - Intro 0:10 - What it ...
Ruroc Camera Mount Review | The Fatal Flaw
Просмотров 2,3 тыс.2 года назад
After several months with the Ruroc Atlas / Berserker camera mount it is time to review and shine a light on it's glaring problem. Is it worth the price of admission for a form fitted camera mount? You decide! 0:00 Intro 0:13 The Good and The Bad 0:52 The Fatal Flaw (For Your Camera!) 1:50 The Solution! 4:20 5 Month Followup 4:33 Message to Ruroc! 5:02 Outro Check out our merch stores: A little...
MT09 Graves Fender Eliminator Install
Просмотров 1,4 тыс.2 года назад
This is a walkthrough of the installation of the Graves Motorsports fender eliminator kit for the 2018-2020 MT09. All in all, this is a solid kit, and super secure once installed on the bike. 0:00 Intro 0:14 Unboxing the Kit 0:34 Disassembly and Rear Axle Removal 2:28 New Axle Block Installation 2:54 Assembling the Rear 3:33 Tail Section Disassembly 7:00 Swapping Turn Signals and Graves Kit Ass...
MT09 Colorclusterz LCD Flip and Color Change
Просмотров 2,2 тыс.2 года назад
I've had the itch to try one of these LCD flip kits for a while now. So why not try it out. This video will take you through the installation of a flip kit, and installing the color change film as well. 'Tis the season for motorcycle modifications! 0:00 Intro 0:29 How it Works 0:39 Removal of the MT09 Cluster 1:26 Opening the Cluster Assembly 2:16 Removing the Polarizing Film! 3:19 Check for MO...
Mail Call! | Before We Feed Elephants
Просмотров 342 года назад
Have you ever repeated a word so many times it got on your own nerves? I call myself out in edits, and this time it's Walt! Thanks to all of the content creators that have reached out to me, and that I have reached out to. You guys and gals are what make the motorcycle community awesome! Big thanks to @WaltInPA @Valorcycle @RuckusRides &@theChestnutMtnTinman for this month's mail call! Check ou...
Motorcycle Set up | The FIRST Thing YOU Should Do To YOUR Motorcycle
Просмотров 4482 года назад
A first step that is overlooked by both new and veteran motorcyclists is setting up your motorcycle to fit yourself. Motorcycles are capable of being adjusted in multiple ways to dial in controls and comfort to the rider, here are just a few ways to get started setting up your motorcycle to give more confidence and controllability on the road. 0:00 - Intro 0:16 - Ride the motorcycle first 1:03 ...
Motovlog | Buying Used From Dealerships
Просмотров 1132 года назад
We're heading back to the Harley Davidson dealership for the first time since buying the MT-09. This has me thinking, is there a false sense of security when buying a motorcycle from a dealership? Let's talk about it! Check out our merch stores: A little bit of everything here: Skipshift.redbubble.com Shirts and Hoodies here: skipshift.creator-spring.com Affiliate links the help support the cha...
Mail Call | Meet Blue | Yamaha MT09
Просмотров 812 года назад
Another monthly mail call featuring 4 Northeast US content creators! Also, the MT09 is finally on the road and ready for video. Special thanks to the channels featured in this video, @RoysMotoVentures, @MIKEWILLBIKE, @PurpleOnThree, and @PSPTommyG ! Check out their channels here! Roy's Moto Ventures: ruclips.net/user/RoysMotoVentures Mike Will Bike: ruclips.net/user/MIKEWILLBIKE Purple on Three...
MT09 FZ09 MCCT INSTALL
Просмотров 30 тыс.2 года назад
My MT09 has rattled its last CCT rattle. It's time to swap to a manual tensioner and kill the rattle... well one of them. 0:00 Intro 0:20 Disclaimer 0:49 Removing the Stock Tensioner 3:40 Installing the MCCT 5:32 Setting the Tension 6:14 Better Safe Than Sorry 6:59 Using a Mechanic's Stethoscope 7:53 Outro #mt09 #yamaha #motorcycle #motorcyclemaintenance
Mail Call July '22 | No More GSXR
Просмотров 682 года назад
Another month down and another mail call coming your way. Check out these great channels if you haven't already and find out what's changing in the Skipshift garage. Check out our merch stores: A little bit of everything here: Skipshift.redbubble.com Shirts and Hoodies here: skipshift.creator-spring.com Affiliate links the help support the channel: Using the affiliate links below may give me a ...
DEAR MOTOVLOGGERS | THIS IS WHY YOUR MOTOVLOG AUDIO SUCKS
Просмотров 6192 года назад
Yes all caps! Motovlog audio, or helmet audio in general is one of the hardest things to get dialed in. Here are some tips to help you understand mic specs and what they mean for your audio struggles. My audio isn't perfect by any means, but I want to help you guys out and raise the bar on motovlogging sound. Thanks for watching! 0:00 - Intro 0:31 - How Are You Recording? 1:31 - Understanding L...
MAIL CALL | STICKER SWAP
Просмотров 512 года назад
After a few weeks of time away from RUclips the time has come to get back into content creation. A few videos were edited during the down time, but they were lame. Rather than put out some choppy edits and boring topics for all to see, I decided to take a few weeks to think about the direction of the channel for this year. In 2022 I'm hoping to bring you some more awesome scenery, more interact...
Ruroc Atlas 4.0 Review | 1 Month Review
Просмотров 23 тыс.2 года назад
After riding in the Ruroc Atlas 4.0 for a month, it's time for a follow up from an independent unsponsored rider. I'm going to address a couple of questions and problems that have come up with the 4.0 and Ruroc. Spoiler alert; the Atlas 4.0 is still a solid helmet. Thanks for watching! 0:00 Intro 0:42 Questions and Concerns from other reviewers 2:50 My Thoughts on the 4.0 After a Month 4:17 Rur...
GOPRO ACCESSORIES | HSU Aluminum Extension Arms
Просмотров 5132 года назад
HSU Sent me their all aluminum GoPro extension kit to check out and review. Here's my take on the good and bad after using these for several weeks on different projects. 10% Off GoPro Accessories from HSU hsushop.com/?ref=2xpf8dbuao 0:00 Intro 0:09 Disclaimer 0:19 Review 5:58 Final Thoughts Check out our merch stores: A little bit of everything here: Skipshift.redbubble.com Shirts and Hoodies h...
GoPro Wind Noise | HSU Windslayer Review
Просмотров 4232 года назад
GoPro Wind Noise | HSU Windslayer Review
Battery Tender Installation | GSXR600 | Less Than 5 MINUTES
Просмотров 3,2 тыс.2 года назад
Battery Tender Installation | GSXR600 | Less Than 5 MINUTES
Ruroc Atlas 4.0 First Impression | Comparison
Просмотров 16 тыс.2 года назад
Ruroc Atlas 4.0 First Impression | Comparison
Motovlog | Scrambler Off Road Adventure
Просмотров 622 года назад
Motovlog | Scrambler Off Road Adventure
Motovlog | Motorcycle Microtransactions
Просмотров 402 года назад
Motovlog | Motorcycle Microtransactions
Beginner Motorcycles | Why YOU Should Start On a Cheap Motorcycle
Просмотров 532 года назад
Beginner Motorcycles | Why YOU Should Start On a Cheap Motorcycle
CB450 Jetting For Pod Filters | Reading spark plugs
Просмотров 4292 года назад
CB450 Jetting For Pod Filters | Reading spark plugs
This was brilliant, thank you
bEST VIDEO EVER.
Great video thanks for the time and info
Great video thanks for the time and info
Great video thanks for the time and info
your video is clean well done. i just hit subscribe
i dont understand how you took the rear seat off
@@cugnuggler there is a keyed latch under the left side of the tail fairing that unlatches the rear seat on that model.
Thanks for your video... I actually just did this today and after installation it started right up and sounded normal (no ticking). I ran it about 30sec. Then an hour later i went out to ride and it started up again but after only 3-5 sec it sputtered and died. Now it won't start. Any thoughts? Ideas?
@lezipOD A sputter before shutting off would be air or fuel related more than likely. Check for fuel and spark if you're able and see which one is missing. I can't think of any connectors in the area that may have gotten unplugged or pinched during this install process.
Hello, i have a “problem” i just bought 2021 tracer 9GT and i hear a noise from clutch when stacionary no noise when i pull clutch only when its in neutral, othar than that clutch and gear shift work perfectly fine, i found on YT a lot videos whether people complain if the sound is normal even on new bikes or not… ??
@amilaganovic5030 It could just be a little slop in the clutch basket. I've heard that from a lot of bikes that operate perfectly fine for years. If it concerns you too much, taking the side cover off of the engine isn't that big of a deal to get a visual on the basket. Check for play in the clutch basket, rotationaly and "wobble" on the shaft. Check for broken clutch discs and any slack in the clutch pack. All of that said, it could just be a noisy clutch. I've had a few Hondas, Suzukis, and other brands over the years that always had a little neutral noise but ran and shifted perfectly fine the whole time. If you start feeling a lurch or surging while under constant throttle, then it may be a sign of mechanical issues.
@ i have contacted a few bike shops and most of them said its normal because clutch is free and not under tension but when it engaged clutch sound dissaper for 100%, i actually only hear it when on red light and with helmet ON then i can hear all vibratios of bike etc. when helmet of only can hear it if get ears close to clutch itseft
Thanks bro, I needed this!
Thank you Sir, I learned all the details I was looking for.
What do I do if someone stripped the Allen bolt out before I bought the bike? 😐
That's a tough one. You can try getting some vice-grip style pliers on it and see if that works. It may have to be drilled and maybe a screw extractor will get it loose if they didn't overtighten it.
What camera did you use to film this
I used a Sony ZV1 to record with. It has a good field of view and gives a good bokeh on up close shots.
Sir this video it’s there clearest explanation every I watched. Thank you so much
Amazing explained!!!!🙂🙂
I've had my Ruroc carbon track for about 2months I absolutely love it. Field of vision is huge amd the weight is light. The red visor I wear day amd night and can see perfectly in both situations and the only thing I had to mess with was the pin lock fitment. I received it in less then a week from California.
Nice no bull review. Appreciate it. Nice job.
This was the most in depth review with no bs because your not sponsored so no biased opinion this video deserves to blow up because you went head over heals in great detail and legit factual comparison’s thanks for sharing🙏👍 subscribing now
Thank you for the review, your audio sounds great, what mic setup do you use?
I used the Tascam DR10L for that recording and audio was later synced in post.
Just in the same way, similar symptoms are occurring in XSR900. It was very helpful. The video is wonderful for you. And it's very polite. By the way, was there a sound even in the neutral gear state? GROOOOOOONNNNKKKK ♩
I never noticed the noise in neutral, only while off throttle in gear. Usually low rpm also.
To jest to samo na jałowym
I tightened it as much as I could by hand and never heard the whining noise of being to tight, when cold i have the chain 1/4 turn tighter than when warm to get the rattle to be gone should I stick with a 1/4 turn tighter so it's not rattling on cold start? I'm worried it's to tight.
If the bike still rattles when cold should I tighten it up a bit? It rattles until about 130 degrees, I don't want to over tighten it
You could make a few small adjustments and see if it makes a difference. Go maybe 1/8 or 1/4 turn at a time so as not to overtighten the chain. If you hear a light "whining" noise then back the tensioner off slowly until the whine goes away.
@Skipshift is the whirring very noticeable? The bike whines/whirrs normally and I'm worried I won't be able to tell
You could also increase the brightness on the cluster.
The brightness is maxed 😬 The blue overlay dims the display a lot, but it's still visible enough during the day and plenty bright at night.
@@Skipshift nice imma install the yellow one tomorrow. going for black and yellow accents on my fz.
Thanks for sharing. The previous owner installed a MCCT on my FZ09 and I want to adjust it. Which wrench should I use to loosen the tighten nut of the MCCT? And if I understand correctly, after loosen the nut a little bit, I need a 4mm allen key to adjust the screw?
Thanks for this video. The most informative I've seen yet!!
Glad it was helpful!
Porque voce girou o motor manualmente? ( 6:49min)
Certificando-se de que o sincronismo do motor está correto. Se a sincronização estiver errada, as válvulas podem entortar e danificar o motor. Girar manualmente apresenta menos riscos do que usar o starter. Checking the engine timing. If the timing chain had slipped it could cause a valve to hit the piston and damage the engine. Turning the engine by hand let me feel for any collisions or binding without risk of bending valves.
@@Skipshift 👏🏻👏🏻👏🏻
Thank you Eric I have 2022 Tracer9 GT new bike, with the same kicking Noice I thought from the water pump , thank you well done video.
Be aware if the nut come loos on these types of tencheners, it will destroy your engine ask me how I know.
Thank you soooooo much for this video! I have been messing with my new audio recorder and my mic placement for weeks, wondering why I am getting such horrible crackling audio! You were the only person to bring to my attention, how bad my mic actually is. I had no idea it was my mics fault, I thought it was my voice or my set up or my gain level settings I had changed one million times. This is a great video and deserves way more attention! Happy riding :)
You're very welcome!
What was the front sprocket torque spec? I got the speed sensor nut but not the nut for the sprocket itself. Also is this the same specs for a gsxr750?
The front sprocket nut torque is 83 ft-lb. Same on the GSXR750. 👍
Do you also have video without ndfilters?
Nope. I always used ND filters on the GoPros. The main difference was details in things like clouds and brighter textures. It gave a little more of the HDR look to the videos.
Thanks man! Perfect summary.
Ive got an MT09 GEN1.. 2014.. MY CLUTCH DOSNT MKE ANY NOISY SOUND.. MY ENGINE IS NOW AT 68.000 MILES.. my valves have never been checked.. so basically i would say.. STOP ABUSING UR MACHINE.. CHANGE PLUGS FILTERS AND OIL REGULAR.. no need for any silly noises if you respect your engine
Not checking your valve clearances is disrespecting your engine. As a Yamaha service tech, your CP3 has about a 66% chance of eating an exhaust valve in the next 10k-15k miles. Good luck!
Com quantos mil km vc fez a troca dos discos de embreagem?
Cuanta tension debe llevar la cadena de distribución??
Able to move slightly by hand. Maybe 1mm at most. Capaz de moverse ligeramente con la mano. 1 milímetro como máximo.
Rubber spacers
Hey do u have a link for that rear sprocket? I tried to order mine 3 different times and they keep sending me a 5 nut one instead of the 6 nut one i need
I have a 2004 gsxr Suzuki 600 im going 47 in the back and 15 in the front
Very much appreciated man, got a new set up and I’ve been struggling so hard to keep my microphone from peaking. Sounds like I may need a microphone update
one of the better how to videos ive seen good job! thank you!
Glad it was helpful!
3:00 very helpful
I was not expecting Moonlight Sonata during a teardown video but it was a welcome option over some of load BS drowning out any instructions given. Thank you sir.
I recently purchased a CB450 SC Nighthawk. This video is the most in-depth step-by-step.
Great video
I wish i had a garage to do some work like this :D Last time i did clutch replacement was in front of the house and it began to rain like crazy. No fun at all =D
I spent many years working on bikes and quads out in the yard or under a lean-to. I understand exactly what you mean.
It could be those rubbers in my case too? On idle when cold its pretty quiet, when heated up, i hear rattle, when i pull the clutch it stops. Also my handlebars vibrate little.
If the rubbers are bad or have shrunk they normally make noise when cold too though. It could be regular clutch basket noise if it goes away when you pull in the clutch lever. It would be hard to say for sure without being there to hear it first hand.
The Iron Butt is just a way to motivate riders to do something, a good way for two or three riders to have a memorable trip. Do the 1k outbound, then come home the backroads and see some sights! It's also a way to get people to pay for a piece of paper. Sort of like a College degree, sit in on all the courses, take and pass all the tests, don't register and pay tuition = no paper, no degree!
Beethoven and clutch install!
Hey sir, after doing all of this my clutch stays depressed after I pull it in, I have all the parts on correctly I’m 99% sure, any advice or ideas?
Hmm that is an odd one. The first things that come to mind are the shaft I am turning at around 14:02 in the video. If it isn't engaged with the rod there would be no connection between the clutch and lever. Also the arm that connects the clutch cable and that shaft would be another possible culprit.
@@Skipshift the shaft is engaged, but I noticed that the clutch cable holder isn’t line up with the spline it connects to. It’s off by only 1 tooth, do you think that would be the sole cause? Thanks for the response. I would try to test it myself but the head of the bolt came off so now the screw is stuck in, if it’s a different problem I’ll just leave the bolt in before I put myself through torture or lose money.
@@imasealarparparparp2714 if the bolt that pinches the splines on the cable arm is what snapped it may have let it slip the splines. That could be the problem. As for the arm being out of position, you might have enough room on the top and bottom clutch cable adjusters to make up for the arm position. If it was the bolt that I mentioned before, I'd be cautious about riding it without replacing it. If it was to slip a spline or jump a tooth while riding that could be a bad day. Hope you can get it resolved without too much trouble.
@@SkipshiftI got it sir, if anyone else has this problem make sure that the marks on the spline are lined up exactly with the marks on the cable clutch holder. Mine was off by just 1 spline and it didn’t work, moved it centimeters over to be exact and all good now. Appreciate the video again sir
@@imasealarparparparp2714 I'm glad you got it figured ou! Thanks for sharing your solution for others that may run into that. Ride safe 🤘
I had bought one and stuck it on proper but one month it comes off, contemplating just gluing it straight on
That is definitely an option. I wanted to keep it removable in case I had issues with the helmet or if I wanted to go with a standard GoPro mount.
Hi does your arrow on dot line up on the clutch cover and clutch arm on 22 plate Gen 3 it's offset and only lines up once clutch lever is pulled in..Gen one doesn't do the.. Gen 2 your bike same slipper clutch.? Thanks for any info..
On my Gen 2, lining the arrow up during assembly was the correct position. I'm not sure if they may have changed things on Gen 3.