![Oly](/img/default-banner.jpg)
- Видео 10
- Просмотров 114 938
Oly
Добавлен 9 апр 2008
Видео
Llangollen Tet
Просмотров 219 дней назад
Wych Tet
Просмотров 319 дней назад
Scheduling a Nibe heat pump for Octopus Agile
Просмотров 1,1 тыс.4 года назад
How to schedule a Nibe ground source heat pump (F1245) for use with the Octopus Agile tariff. These settings minimise electric use by the GSHP during the most expensive, and grid stretched, parts of the day - typically 4pm to 8pm. In the end I decided to start testing this by lower our heating curve by -5 as this results in a 8C temperature drop, ouch is more than enough to start with and work ...
Integrated Dishwasher DIY Door Repair (Heavy Door)
Просмотров 9 тыс.4 года назад
This video outlines how I fixed the dishwasher door spring & pulley hinge mechanism on our Beko DW603 (Angora) fully integrated dishwasher. You really don't need to throw away what is otherwise a perfectly good dishwasher! The hinge mechanism really doesn't indicate that the rest of the dishwasher is about to fail. Repair it yourself with a few common tools in a short time and get years more se...
How to Make an External Spare Wheel Carrier for Renault Master, Vauxhall Movano, Nissan Interstar
Просмотров 17 тыс.4 года назад
How to make an external spare wheel carrier mounted to the underside of your Renault Master, Vauxhall Movano, Nissan Interstar van All from ebay. Eye: www.ebay.co.uk/itm/251175242674 Rod nuts and washers www.ebay.co.uk/itm/152796756209 Connector www.ebay.co.uk/itm/382894501511 Nylocs www.ebay.co.uk/itm/121756588156 Jams www.ebay.co.uk/itm/123675784914 Plate www.ebay.co.uk/itm/301842523211 If yo...
Propex HS2000 Stealth Kit Test - How quiet is it?
Просмотров 8 тыс.4 года назад
Following on from my previous video unboxing the Propex Stealth Kit: ruclips.net/video/5H8KSPfN9Fw/видео.html This video tests just how quiet the Stealth Kit is when fitted to Propex Heatsource HS2000. Many people are concerned about the noise from these units, making their van more conspicuous, but personally I just wanted to ensure I wasn't going to get woken by the noise of the heater at nig...
Propex HS2000 "Whisper Quiet" Heater Stealth Kit Review/Unboxing
Просмотров 5 тыс.4 года назад
Unboxing comparison between the standard Propex HS2000 kit and their new Stealth Kit to reduce internal and external operation noise to make the system "whisper quiet". Stealth Kit currently only available directly from Propex for ~£55 delivered here www.propexleisure.co.uk/shop/hs2000-stealth-kit/ To see the difference just acoustic ducting makes see this guys video m.ruclips.net/video/mRFRRw9...
How to replace a broken roof tile in 2 mins - easy peasy!
Просмотров 12 тыс.5 лет назад
How to replace a broken roof tile - as you'll see this is literally an easy 2 minute job once you know how.
Cruise Control Fix - Brake/Clutch Switch - Renault Master/Movano/Interstar
Просмотров 62 тыс.6 лет назад
Quick & easy fix for if your cruise control isn't working or setting as per this one. This solved my problem and hopefully will some yours too. Vauxhall Movano, Renault Master, Nissan Interstar
Amazing video, really helpful and informative, thanks
wadą jest to że przy odkręcaniu koło spadnie i połamie ci ręce.
Hello. The video is four years old now so I'm assuming it works with no issues? Thank you.
This fixed so many issues for me, thanks alot
How,to,over complicate situation rip out old use hands strength replace Jesus make a mountain stick to your 9/5 sandwich corp ars lick boss job
How do you lift the wheel up on to the stud bar? They are too heavy to lift by hand.
Could try supporting some of the weight with the jack ?
Vous êtes juste brillantissime!!! Merci pour cette magnifique invention!
If these tiles are only nailed in every 3rd row (or 6th if sticking to building regs), how do they hold up in storm type weather? Considering how many storms we've had in recent months, I would've thought you'd get loads of tiles slipping out. The small hook over the batten and relying on the weight of the tiles on top just wouldn't give me any confidence in this type of roof.
Roofs with peg tiles are not nailed . They are the same size as the small tiles in this video. I believe what is causing more small tiles to be blown off roofs in storms is the lack off nibs! All off the roof tile suppliers ( Marley, Redland, ) are making tiles thiner and lighter for more profit ! New concrete small tiles are as weak as FU€k due to lack off concrete in them. Sadly due to the modern day building specifications every thing only needs to be guaranteed for 10 years .
I had one of these. Never worked. Cant believe they are still on the market. Proper shit.
Ours has never missed a beat. Still one of the biggest selling units in self builds and commercially built motor homes. Maybe it was the installer or a bad one.
Same problem on my Vivaro only one switch on my clutch took it off gave it abit of wiggle and all sorted...for now. Great vid thanks for sharing.
Glad it helped!
I don't ever comment on videos, but this just solved my break light problem... absurd. THANK YOU
Great news, you're most welcome!
Great video. Really clear.
Let's see how easy it is when the tiles are flanged, like Marley modern, without breaking the flanges.
How do you do that when they require every row to be nailed?
Exactly the same (the row above was nailed), the tile acts as a a lever to lift the nails out. But if you get really stuck you'd use a saw behind the tile to cut the nail
I have just mounted the spare wheel on my 2010 Renault Master according to your design. Brilliant design !!! Thank you
Fantastic! Glad it helped!
Excellent video, thank you. ❤
Twingo 2 with the same issue, I fixed it! Thanks
Great vid. Just wish this was the reason my MK4 Micra's cruise control wouldnt work. Thanks though!
What a helpful tip ! Thank you very much !
After cutting off that metal thing, does rear bumper still hold good?
Yep, its never shown a wobble and been through plenty of MOTs now
So, tomorrow I'm cutting it too...
Thank you for this, I have a Beko DW686 and this was perfect, installed a treat, thankyou!
Brilliant, shame the links no longer work as I'm trying to work out the parts sizes required for the threaded bars, steel plate etc
Apologies, yes I guess the link will eventually die! From looking at my receipts I think it was all M20 bar/nuts etc. The M20 threaded stainless bar was cut down from a 1m length I ordered. Hope that helps
Just measure your fucken wheel bolts. If yours is also a mk2 then that's m14s BTW, which is 14mm. And the fuck you mean you need to work out what size plate you need? The pcd is 5x130. That's the furthest distance between 2 bolts. Just add a bit, and plate is plate, it's adequate thickness if it's plate..
Great vid, thank you very much :)
Glad you liked it!
Mines works didn't work. Code 3 reset reset every day. Then code 4 never worked for days phoned from Portugal. Could not get fixed then filled my UK gas bottle up with UK regulator and it works non stop. I was using a Portuguese bottle and regulator with working not working then not working at all. Is this because of the portugese regulator.
I had one. Never worked. Threw it in bin.
Hi I retrofit cruise control to Renault master mk3 and doesn’t working on last gear any tip how fix it all sensor replacement with new one please help
No idea sorry. Good luck
Hello did you fix it? I have same problem but 5 and 6 gear
Fantastic! I was thinking I was going to have to bolt through the floor, but this is a brilliant engineering solution. I imagine MOT testers were also happy with the design? Brilliant work.
Many thanks. Yes MOT tester have been fine with it for several years now
Is there any way I can fix a slipped slate tile from the inside? It's accessible from the loft and I can reach the tile but can't manoeuvre it properly. Impossible to get a roofer out for such a small job!
Not that I'm aware of sorry!
I cut some lead and used that, folded over the batten and ensured it was snug.
Tight cunt no just pay the 150 for a roofer to change tight fuck replace from inside Jesus go away
Thank you!
Thanks great info just fixed mine with the same problem
How are you finding it two years on?
Great, not had to use it yet, but the garage has never had issue with it and it has stayed in situ fine.
Hi! Thank You for this solution. I made this way a year ago and till now works fine. Once even I had to use spare wheel and mount works like a charm. Thanks again.
That's great to hear! Many thanks and happy travels 👍
Też ucinałeś ten kawałek metalu jakby od haka?
@@dtbndtbn tak. trzeba uważać, żeby nie poprzecinać przewodów od gniazdka przyczepki.
@@krzychuzet pytałem już autora, ale nie zaszkodzi poznać i Twoje zdanie - zderzak nie rusza się jakoś mocniej po wycięciu tego uchwytu?
@@dtbndtbn nie, zderzak jest absolutnie nieruchomy, b.często na nim staję
Hey! Great video! What a great idea... I'm just doing mine now but do you know what size diameter eyebolt you used? I have one but the inside diameted is 35mm. Surely that might jump over the nuts? Or do you think that's impossible... The link you gave is now not working! Thanks for all your help!!!
From what I can see on my ebay order it was a M20 stainless eye bolt 20mm DIN580
No chance of this on my 2008 Renault master. Tyre is 270mm wide and total ground clearance from chassis to ground is only 370mm. So with wheel underneath it leaves just 100mm. No way that works for me :(
It fits between the chassis beams (on the 2009 model anyway)
@@OlyLowe really? On a 2008 there is no way it will fit between, when i say chassis I mean the cross ways bars not the side bars. Gutted. Really want that wheel out the way but it's not to be.
What's the ground clearance like going over speed pumps etc after this?
The same as with the towbar fitted anyway
@@OlyLowe ok nice. Was a bit worried about grounding out but I'll give this a try. Thanks for video
Just wondering what van do you have? As I’m looking at getting one of these for my Mercedes sprinter LWB. Thanks
Nissan Interstar/Vaux Movano/Renault Master
Thank you for getting back to me, Dose it get your van nice and warm? Thanks again
Yep kept us warm in the alps in winter
You can use your hamer easy
Great video and thanks so much .... need sea sick tab though
Imagine how much most dealers would charge to fix that 😳 thanks mate 👍
Thanks
hey guys, i have the same problem on my Vivaro, I try that but now I have 2 error's messages, one for my cruise control the second for my brakes. Someone can help me?
Very many thanks for your video, this is an excellent idea and exactly what I needed to solve the same problem on my retired fire service support LDV Maxus van/campervan. So very many thanks again 😊
You're welcome, glad it was useful 👍
Not impressed propex doesn't just include the stealth kit when they are charging over a 1000$ for this heater
Available in Canada?
No idea sorry
Hello. Great video! Only one question, what is your tyre size ? Mine looks too wide to fit under. Thank you
Glad you like it! My tyres are 225/65R16C. Hope it works for you too 👍
Excellent solution. I wonder if this will work for a Ducato. My spare (that didn't come with the vehicle is hanging around in the garage. I'd love to sling it underneath. I have 4 brand new continental tyres but couldn't tour without a spare, its a budget tyre on a secondhand rim. I have to wait now for some fine weather to see if there is a similar location on the ducato... Thanks again for sharing.
Glad you like it and hope it's of use 👍
I have a renault clio 4 and i changed the break switch and it did not work, i will try your method tomorrow if this works i will subscribe and and lots of beer from me :)
Woohoo, I'll hold you to that! 😄
@@OlyLowe i will write to you tomorrow :)
@@mayhooom5700 hello, it did not work, I still have the problem...
Terrific - Thanks for the video
Brilliant! My kind of engineering. Thanks for sharing.
Thanks for the info. Wondering what's your experience with the exhaust. Can people see smoke or steam in freezing temperatures. I stealth van life in Alaska. I want to switch out my Wave6 heater for the propex. Just have to be steath. Thanks great video bro.
Many thanks. Yes, it'll steam like most do in cold weather
Great video! Had the same issue on Renault Traffic 2011. Cheers!