Видео

Thank you for this video! I had the same issue on my Primadonna S (ECAM model) and the fix is similar. There are videos on how to open that model as well if someone is looking for that. Coffee machine fixed with a 50 cents o-ring. Forever grateful!

Thank you very much for this helpful video Andy. I managed to fix my machine as a result of your wonderful step by step instructions.

Just watched your video as my coffee machine was doing the same thing. Spent £3.50 and the o-ring I needed. Followed your steps and all working fine now. Thanks so much. I have to ask, how did you know it was that o-ring to replace lol

Thank you So much

Thank you, that solved my problem.

This fixed it for me 😊

I have the magnifica xs and when I do decalc, it leaks the water all over. Normally, when I turn the machine on or off, it rinses from the normal way but I wonder if this ring would solve that problem as well? I had opened a few months ago and o-rings on the side looked fine. Thank you in advance.

Thank you Andy for making this video. This really helped me fix my machine which was dripping water in the drip tray. You saved me $200 to get it fixed. 👍🏼

Followed this tonight with the correct orings but now it’s dumping all the water from the rinse into the grinds bin - I’ve had it apart several times and swapped out the oring - no joy it’s actually worse than before

Thank you so much for this. Could not have fixed my machine without it.

Hi, wo hast du diese o-ring set gekauft, gute set ...

Thanks for making this video I orderes O rings, follow you step by step, clean it and my 9 years olds machine is like new

Thnks. Fixed mine. With same probelm.

Dear Andy, I have just replaced the 4x2mm O-ring as you described, and leaking issue is gone. I was loosing about 1/3 of water into tray every cup of coffee. Thank you very much.

Thanks for the video! Sorted my problem!

It worked for me! After i cleaned a piston and changed the o ring my machine is working like brand new. Thanks for making this video

The problem is the machine is very dirty, better cleaning

My machine has been leaking for a while. I thought it was just age then today all water/coffee stopped coming out. Sen this video which I will give a go despite being only moderately 'handy'! My question is the O ring. Is the 4mm ID or OD? About to order 8mm OD, 4mm ID, 2mm width. Does that sound right?

My Delonghi Magnifica S is dumping water the Coffee grounds container, not sure if its the same problem but I think its very similar sort of issue.

When I recognise the machine is the same as mine it is worth watching the video. And using a manual screwdriver. Anyone who uses an electric screwdriver on plastic parts is asking for problems.

I’m having the same issue with my ECAM250 Magnifica S Smart. It’s dumping approximately 100-125ml of water into the drip tray for each regular coffee it makes (not the long one, and excluding the switch on/off process). It’s still under warranty, but now due to go back to the repair centre for a third time. They keep trying to tell me there’s nothing wrong with it! It’s gradually got worse over the last couple of months, so I know it’s not normal. I have Supplied video evidence too. One CS told me a few ml was acceptable, but not that much. The service centre don’t seem to want to fix it though. Anyone have any ideas how to actually get them to sort this under warranty?

Excellent video ..... I had the same issue on the Authentica model. Fixed with a 4mm inside diameter x 2mm. Re-assembled using food grade silicone gease on all o-rings

Hi thanks for video but i have a problem when i use stream works fine but when i make coffee not water start (mean pump not start working its works on steam only) can you help me please

Thank you for this great and detailed video. I was able to follow your instructions and resolve the issue with my Delonghi Magnifia xs. I would like to add that I found the correct size O ring, at Lowes really cheap. It was around $3 for 10 of them. The part in made by Danco #61

Hmmm whats the morale innthis? Buy original spare parts, instead of beeing a cheapskate.

Nailed it! Thank you so much buddy. This was a really clear and detailed guide and it worked a treat. Ended up getting a box of o rings from screwfix in the end. Had the size I needed, if a bit pricey. 😅

Note: it is normal for some water to accumulate into the drip tray when the infuser changes position, especially when you are generating steam for frothing. Yes, cleaning the clogged valve on the top if the generator will resolve this issue. Contact your local DeLonghi authorized service center for the correct OEM replacement parts.

Don’t they just sell washer sets for delonghi ? O rings have quite specific tolerances

Hi I’ve changed the o ring but with no luck the water is pumping out of both pipes that we disconnect in your video but not making it out the spout just in to the grounds container

I have a ecam23.460 does exactly this, is it literally just that o ring that causes the issue an do you no why mate gotta give it aho

I can't find 4mm X 2 mm silicone o rings anywhere!! 6 mm is the smallest OD I can find. Anyone have a source? Thank you for your video btw!

4.5x2mm worked for me. No idea how long it'll last, it was still a little loose like your 5x2 but did work. Maybe your screwdriver damaged it?

Thanks a million for your help

Excellent video, I have exactly the same issue and will try your fix

Thanks for the upload...fixed my machine that hasn't been making coffee for years...can't believe it was so easy... ...you are the best ♥️

Thank you for puting here this video. Following it I fix the problem with my Delonghi-Ecam23.420.

Best video I’ve found on RUclips. Replacement o ring cost me £1.40 on eBay (including delivery) and in less than an hour the machine was fixed. Caffeine fix supplier once more fully functional. Many thanks for taking the time to post this video

Many thanks for this video it was a great help.

Omg this actually worked... i have delonghi eletta cappuccino but its very similar

This worked for me too. Thanks so much for posting Andy.

Hi, I have this model which has the extra milk container and hot water tap. After using the hot water from the tap I find a puddle of water fill inside the coffee grind bin. Im not sure if this is normal or something is wrong. Any ideas? Thanks

Thank you, also works on the older 2018 model.

Thanks Andy. I had the same issue and fixed it in 2 hours with the help of your video. Could not have done it without it.

This video was fantastic and allowed me to fix my machine. I've stocked up on the delonghi spec o-rings which cost me $2.50 each and bought a couple tools to make the job easier. Thanks for putting this together!!

Thank you for the informative video. Our beloved ECAM 23450SL was dumping water into the drip tray, and the frother wasn't working like it should. After this relatively easy repair, it's now working perfectly again.

Yes, yes, yes, that was the small one. Thank you 🙂

What's that light brown leakage seen on the right at 4:08? Is it related to this issue? I've got a similar problem with my machine and there's also similar leakage inside my machine though to a lesser degree.

Hi , Thanks a lot for all your vid I bought my DeLonghi Magnifica XS from Costco MN 120 v - 60 HZ 1250 W Type ECAM 22110 B P= 1.5 MPa (15 bar) When I took it to North Africa and by mistake I plugged it in 220 V I smelled little burning. I still can turn it on I can hear the coffee grinding all screen look good with green and yellow light but it doesn't dispense water nor a coffee. Please help.

Thank you very much Andy. I had the same problem and would never have found out how to solve it. I followed your instructions and now everything is working. Very generous of you:)