- Видео 1 000
- Просмотров 601 557
Waterlemon
Великобритания
Добавлен 12 фев 2020
Thank you for showing interest in my channel! I create a diverse range of content that includes instructional videos on teaching mathematics, showcasing the creation of 3D printed items, gaming-related content, unboxing various items, exploring camping tips and adventures, as well as sharing exciting cooking recipes and techniques. My channel is a vibrant mix of educational, creative, and entertaining content, catering to various interests and passions.
RUclips: ruclips.net/user/Waterlemon369
Twitter: Waterle88599262
RUclips: ruclips.net/user/Waterlemon369
Twitter: Waterle88599262
Видео
Finding the rope length using algebra
Просмотров 162 месяца назад
Finding the rope length using algebra
Fixing Fusion Issues in 3D Printing with Cura Slicer Settings
Просмотров 1,7 тыс.2 месяца назад
Fixing Fusion Issues in 3D Printing with Cura Slicer Settings
Blank Elephant - 3D Printing - articulated parts
Просмотров 332 месяца назад
Blank Elephant - 3D Printing - articulated parts
Capture/Record ChatGPT Audio, Internal Audio, with OBS: Step-by-Step Guide
Просмотров 772 месяца назад
Capture/Record ChatGPT Audio, Internal Audio, with OBS: Step-by-Step Guide
Xbox Controller holder IKEA pegboard - 3D Printing
Просмотров 242 месяца назад
Xbox Controller holder IKEA pegboard - 3D Printing
iMovie Tip: Placing Different-Sized Clips on a 9:16 Canvas
Просмотров 203 месяца назад
iMovie Tip: Placing Different-Sized Clips on a 9:16 Canvas
Pollen Filter Replacement - DIY Peugeot 3008 (2016 Onwards, Right-hand Drive) 🚗🛠️
Просмотров 333 месяца назад
Pollen Filter Replacement - DIY Peugeot 3008 (2016 Onwards, Right-hand Drive) 🚗🛠️
ARZOPA A1Max Portable Laptop Monitor - try it on the Lenovo Legion Go - Unboxing
Просмотров 2763 месяца назад
ARZOPA A1Max Portable Laptop Monitor - try it on the Lenovo Legion Go - Unboxing
VECTARY Succulent Collection - 3D Printing
Просмотров 384 месяца назад
VECTARY Succulent Collection - 3D Printing
Print In Place Platform Jack - 3D Printing
Просмотров 804 месяца назад
Print In Place Platform Jack - 3D Printing
Flexi Plesiosaurus (print-in-place) - 3D Printing
Просмотров 464 месяца назад
Flexi Plesiosaurus (print-in-place) - 3D Printing
Waterproof Double Outdoor Socket Extension Installation🌧️🔌 🏡🛠️ - DIY
Просмотров 1455 месяцев назад
Waterproof Double Outdoor Socket Extension Installation🌧️🔌 🏡🛠️ - DIY
Ballista (crossbow) print in place - 3D Printing
Просмотров 1235 месяцев назад
Ballista (crossbow) print in place - 3D Printing
Turbine Keychain Key Ring - 3D Printing
Просмотров 266 месяцев назад
Turbine Keychain Key Ring - 3D Printing
Paper Knife Letter Opener - Toy Gravity Knife - 3D Printing
Просмотров 266 месяцев назад
Paper Knife Letter Opener - Toy Gravity Knife - 3D Printing
Lenovo legion go controller adapter - 3D Printing
Просмотров 5576 месяцев назад
Lenovo legion go controller adapter - 3D Printing
Lenovo Legion Go Controller Connector from Legion Go Community - 3D Printing
Просмотров 1,2 тыс.6 месяцев назад
Lenovo Legion Go Controller Connector from Legion Go Community - 3D Printing
How many hours must Sara work to reach 95 apple trees? KS3 Mathematics
Просмотров 106 месяцев назад
How many hours must Sara work to reach 95 apple trees? KS3 Mathematics
Finger Board Print In Place - 3D Printing
Просмотров 4857 месяцев назад
Finger Board Print In Place - 3D Printing
Spin Cube (Print in Place) - 3D Printing
Просмотров 6987 месяцев назад
Spin Cube (Print in Place) - 3D Printing
Fujitsu Lifebook U1010 - a tiny laptop
Просмотров 5617 месяцев назад
Fujitsu Lifebook U1010 - a tiny laptop
Connecting it to flex? Absolutely no slack behind the socket?
😮
oh no the egg shell fell in 😹
link is dead
Awww how cute can we agree that cats make the best bread 🍞 😋 😍 😊😊😊❤
Very bad solar, west of money
Bro turned of gravity
Ohh yea 😀
Nyummy
Help me to find answer on this question
Hi If she's going on red side?
If the reading is on the red side, it indicates that the pressure is too high. To fix this, you need to release some refrigerant. Here is what I will do: 1. Connect the cable as demonstrated in the video, but do not attach the refrigerant canister. 2. Slightly open the valve to allow the refrigerant to escape from the other end of the pipe. 3. Make sure to direct the escaping refrigerant away from yourself and others for safety. I hope this helps! 😀
@@Waterlemon369 when I charge go on red and note 30 bar only with manometer I will check again later Thanks for the answer 👍
😢❤😭
ECHO!? GORILLA TAG GHOST AND ITS CYAN AND THE BOX IS CYAN TOO
I have that same color
Thanks for the vid.
Thank you for watching 👀 ☺️
Incredible 🤯 I just listened to two operas and still did not see whatever was being made, made ❔️🤷♂️❓️ Lol 😉
KITTY
Hey, I have an old 2012 3008. Is that the same or completely different?
I think 2012 3008 uses R134a instead of R1234yf. The refill process is similar but the refrigerant (R134a) and the hose are different for old models. Please check with the user manual. 😀
Hehe so cute silly kittys
THATS MY CAT
I can confrim this is what is inside the big mac in mcdonalds hong kong (i got held at the airport just to confirm this, i wish i was joking😅)
Thank you for confirming 😅🤣
I was at the scanner at immigration, and something in my bag set off the machine, luckily nothing illegal was found haha 🤠🤠
the big mac! 😂
Can you put more panels to the controller? And how?
You can connect several solar panelds in paralel connection and then connect to the controler as one, but i dont know how many amps it can handle
congrats to you , i decided to purchase mine tomorrow
Good Choice 👍 😀
Start off with the price an where you bought it.
I bought it from eBay for around £25 some years ago.😀
in love with your videos
Ooooo it looks so goooodddd
😀😃😄😁😆😅🤣😂
😀😃😄😁😆😅🤣😂
I believe the original designer (Amao Chan) made these with ABS and in their demo video showed them using lots of force to split the first layer to get the parts to start moving - strangely they were fine with that. Your settings are a great solution! Those legs still never press-fit well into the model though! tried a dozen times on differnet printers :D :D :D
These settings worked well with this print. I will try them on the print-in-place sword, which always has fusion issues, and see if they work. 😀
Thanks for this Video, I knew this is crap, and the Video and comments confirms it.
Thanks for watching. If you are looking for a budget-friendly option, I found this setup to be a good starting point. It is basic but gets the job done for me. 😀
That’s a long boi!1!1!
Huh. That skull's got more thoughts in it than mine, that's for sure.
Uhhhhhh lemme think about it... lol
Living his best life!🥰
That is the cat's life 🐱☀😀
Cats are so zen... till they are not 😹
Not zen gen z@@Artnotforthesakeofart
YE YE YE YE YEEE YE BERXIANG YE YE YE YE YEEEEEEE YE BERXIANG
Looks like the 'YE's are the real stars of the show 😄🎵😀
Nice video, but I hope you did not forget to take that piece of Styrofoam block out from the very back of the pizza oven before you made some pizza!!!! 😂😂
Haha, that is one recipe definitely won't be trying. 😅 the Styrofoam block is long gone. 😀
why sideways?
The short video format requires a portrait orientation of the videos. 😀
Work on 2019 model ?
I would say so. 2019 model uses R1234yf and the refill procedures are the same. 😀
Looks scrumptious
very delicious 😋
:o
Sooo soothing good
Mine keeps fusing together, what settings in cura do u use?
I used the default settings in Cura, except I adjusted the retracting distance to 7mm. Fusion occurred with my cube as well, but I did a cut along the gap. 😀
So basically it sucks at any distance
Bro that ikea clipper be going hard
It's not a clipper.. It's a phone holder 👍
First i thought the clipper was the thing being sold, but on the second rewatch i got it, very clever lmfao
Wtf is this shit
fr
So cute
😮😮😮😮😮your cat is so cute
He's not my cat lol but thanks❤😸
Oops
💀 I think the company got the wrong number 💀
I have the exact same axolotl I’m not lying
Mantul
Thanks!
That looks really nice
#beforescott
Chippi chippi
GIANT chippy chippy