Видео

Yes, it is an interesting build because it is a cheaper way to have a hybrid. We work out better to buy the rovan parts and Taylor parts. The rovan Lt complete is $1400 here. But you throw out the motor and rear end and put Taylor parts. So it is $560 rovan parts, needs $800 for the Taylor parts, and put your choice of motor and gearbox.

Problem fix using a Taylor clutch shoe holder

I used to cop this on on rovan 71cc all the time, and now 45cc done the same. When they slip on the shaft, the rest of the clutch wear quite rabbit. I pull apart it apart, and you can see where it was slipping

Looks like a Taylor rc pipe. I run one on my Taylor 50GT

Apart from the easy pull starter spring, let go. What you said about Rovan 45cc being a good lineup against your ALX 50, it might give ALX50 a run for your 💰 😇💥💥💥💥💥💥💯

Me and my mate Kyle, we work out it cheaper to buy the rovan hybrid parts what's needed and only is $560 Aus dollars parts and $800 Taylor parts that's not including engine and gearbox, which works out alot cheaper. Because to buy the Rovan hybrid is $1400 Australia. And you throw out the 36 engine and the rear end not needed. What I found is that the hybrid is more stable than the baja and is .easy to work on

@robertblunden7160 probably gonna be my next rig. But still thinking about it

Put your 71 in it

@robertblunden7160 yeah I'm going to mothball the Vekta and build something else around the 71

Hybrid

It goes good and it's more stable than a baja

@robertblunden7160 yes I agree 👍🏼

Thanks, work well.👍

It's very easy to start. You put the choke on, do 3 slow pull start, and two normal pulls that should start on choke, switch choke off, and start. My battery I use is a 5000mah and I run 75kg steering servo and a 25kg throttle servo, that's all you need. For my remote control i use flysky pro, which gives 300 metres range

Make sure you put the Taylor intake on the right way up .

@@robertblunden7160 Vale entendido, muchas gracias por ayudarme un saludo!

@@robertblunden7160 Lo tendré en cuenta muchas gracias por todo.

I built it to the way I wanted it.

Thanks 👍

Clad it working out for you👍

@robertblunden7160 sorry you misunderstood I was referring to your video I'm having throttle linkage problems with mine and it's a 46 . The 50gt is in my other vehicle.

Mate of my is going to fix it on Friday . That's what happens when I pass the phone to my mate and camera stay in that mode

Thanks, your guess was right at 65.2 mph 👍👌

The best part of this hobby is controlling an out of control baja into control and puts a smile on my face, metal to the pedal 💯💥👍

Thanks MATIE, there alot of effort showing the fine results or all hard work going into this hobby and time. But I am here on utube showing what works and what does not work and helps other people with this hobby. From Rovan to Taylor! 💯👍

Hi can do any engine porting on my rovan 45cc were you located

I’m located in Sunbury, Victoria

I am in Sydney. I am doing a video this weekend running the 45 as I have done more port work. Should be a screamer, and if you like how it runs , we talk about porting your engine.

No worries mate. It’ll be good to see. Hope you have a good one. 👍🏻🇦🇺

She does mate, up loading two videos soon !!!!!!!!!

@robertblunden7160 awesome bro 😎 I love ,RC and two strokes

The first video will explain the runs I did today

Yep👍

It's a sleeper until it hits full throttle 😊

She ready for Saturday run👍👌

There rovan parts on this baja.I think I know what you are saying, yes I rovan 45 videos and rovan 71 videos which there are alot coming. I try to cover all baja's only.Thanks

I just converted the 50gt to 71cc motor. Yes, they are nice engines.

@robertblunden7160 lol, now that's crazy! People put those motors on gopeds and take people at unimaginable speeds, almost 100% of people sell becuase its too fast once they install. I can only imagine a 50lbs truck! Keep on racing. Post more videos if you can!

will do👍

That's true, I worked out the problem with the Taylor 71 and was the bell carrier broken, which was flexing and slipping on top end power

For sure!!!!💪💪💪💪💥💯

Thanks, this one is going interesting. Question, what happen to KGM ( Kyle)

@@robertblunden7160 Hey Robert, Kyle must have decided to take a little time off from youtube. He was out at my place early this year but i have not heard from him in awhile.

Runs a Taylor Hex locker, that's why it's all over the place. Depends on the grass for even traction.

@ it should be going straight if it has a locker, check your pins inside the diff ,they maybe broken

I know the tune is way off, and I am missing some top power. I have to check the air gap on the coil and plug gap. Before when it was in rich mode because the metre rod was not right, and when I ran low on fuel, which cause to run a lean on the mixture, it was like a rocket . So i know how quick it can run. At the moment, I have a clutch bolt come lose, hitting the clutch bell, which you can hear it.

@@robertblunden7160 you’ll get over it soon enough, 5 mins of bashing, hours of fixing

Comes down to the surface I am running on. If the surface part grass and the other dirt, that's where the problem is. On a hex locker, use the hex to lock so you don't have a pin problem

My friend, you need gps to record the mpg to show after each run, and you will be a little shocked about what's fast and what slow. This 71 is a lot faster not not showing it at the moment. I have seen go a lot quicker, and my mate Kyle has seen it.

@robertblunden7160 you know I was just joking, lol the vekta is slow as a sloth takin a shit 🤣

@@5thscaleaddict I know, but watch out for the rovan 45cc next 🏃‍♀️

Does that with ease 😎

Can't complain about that 👌

She went well, I am doing a video today of a big upgrade on the 50 gt.

"Watch out," they have teeth 😬 (lol)

@@robertblunden7160 and they BITE! lol

👍, I see you have a 50gt engine too.👍

@robertblunden7160 yes sir 👍🏼

It's only going to get better!

@robertblunden7160 80 or 71cc I'm debating 🤔

👍👌

👌👍

Happy with the setup 👍

You need plenty of room to run these baja's

There are plenty of rovan videos coming

👍

Most of the time, for steering, I use power and brakes to turn on big bore engines

Sure is 👍

Thanks matie👍

She sure is, and she is taking dancing lessons, and it's in uni roll mode (lol)