- Видео 97
- Просмотров 398 024
Ain't Scared Garage
США
Добавлен 30 сен 2020
Would you like to have a cool custom car that you can take to Cruise Nights and car shows, I have all my life wanted that, well, I have that now, I’ll show you how to build a cool custom ride in your driveway, now understand, it will take patients and work, but if you like tinkering and fixing cars and trucks and have the patients, you can do it.
So the other thing is money, I’m not loaded by any means, but fixing up an old wreck can be the way to go, as you can do it a little at a time, I'll show you how I do it, some of my methods may not be the best, but I always get the job done, and you can to.
So join me as I show you how to take some old cars and trucks that have one tire in the junk yard all ready, and bring them back to a cool old ride that you take to the local Cruise Ins and have blast with
Aint Scared Garage Shirts available at aintscaredgarage.creator-spring.com
So the other thing is money, I’m not loaded by any means, but fixing up an old wreck can be the way to go, as you can do it a little at a time, I'll show you how I do it, some of my methods may not be the best, but I always get the job done, and you can to.
So join me as I show you how to take some old cars and trucks that have one tire in the junk yard all ready, and bring them back to a cool old ride that you take to the local Cruise Ins and have blast with
Aint Scared Garage Shirts available at aintscaredgarage.creator-spring.com
A City FULL of Hot Rods Cruising Ocean City Car Show
A weekend of Cars and Trucks at the Cruising Ocean City Car Show in Ocean City MD, every spring and fall thousands of Classic and Hot Rod cars and trucks come to OC for a weekend of just that, Cars Cars and more Cars and trucks, there are cruise ins at almost every parking lot, it's a great time and a lot of very cool vehicles in every stage of Hopping up or restoration, check it out
Просмотров: 109
Видео
How to Add Factory Cruise Control
Просмотров 6703 месяца назад
You can add Cruise Control from the factory to your OBS Ford truck with ease, you only need 2 parts out of the junkyard { 3 if you have a problem with you clutch position sensor }, and this will work on both manual and automatic transmissions. The only thing you have to watch out for is on older trucks like the brick nose it will use a different type of cruise control servo and you will have to...
Tie Rod End's Replacement
Просмотров 2624 месяца назад
Its time to replace those worn out Tie Rod End's, I'll show you how the ends go together so the Tie Rod's can do there job, I'll be doing this on my old 59 F150 OBS Ford Truck
Power Steering Box Install
Просмотров 1944 месяца назад
Today we are installing a new Power Steering bo on our OBS Ford truck
OBS Ford Cab corner and Door Gap Welding Part 2
Просмотров 3429 месяцев назад
Well I replaced the cab corner some time ago but needed to touch up a few things on it, but as usual I found mere then just some touch up, I wound up cutting a perfectly good cab corner open because I had to fix what was behind the cab corner. The video was just supposed to be a short one on fixing a door gap line, we do fix that but there is way more work that I had to do on the corner Check o...
OBS Ford Cab corner and Door Gap Welding
Просмотров 76411 месяцев назад
Well I replaced the cab corner some time ago but needed to touch up a few things on it, but as usual I found mere then just some touch up, I wound up cutting a perfectly good cab corner open because I had to fix what was behind the cab corner. The video was just supposed to be a short one on fixing a door gap line, we do fix that but there is way more work that I had to do on the corner East Co...
Built in Wireless Phone Charger on an old OBS Ford F150
Просмотров 936Год назад
That's right I installed a built in Wireless Phone Charger in my old 95 F150 Flareside, just like all the new cars and trucks have. I had to do a little dashboard modification but it's in and working like a charm. I wanted to have a wireless charger for my phone but wanted to be built in like the new cars, so I did it my self East Coast OBS Ford facebook group groups/3628172440747341
This Is Why The Vents Don't Work On Your Crown Vic F150 or Mercury Grand Marquis
Просмотров 1,2 тыс.Год назад
There is a simple fix for Why The Vents Don't Work On Your Crown Vic F150 or Mercury Grand Marquis. If your AC does not blow out the AC vents but will only blow out of the defrost and or the floor its most likely your Climate control vacuum module that is at fault, this part is quit expensive to replace, but you don't have to replace it, you can just replace the O rings in the vacuum module, I'...
Daytime Running Lights on an Old OBS Ford
Просмотров 1,2 тыс.Год назад
Thats right, I put daytime Running Lights on my old OBS Ford Flareside, a new Escalade got nothing on old Strappy, I'll show how I did it and something about them that no one it seems on the internet knows about them or are unwilling to tell you By the way, go to the auto parts store or online and get a small roll of 3M tape, and just pull off the tape that comes with it, the thing is just goin...
65 Mustang Hesitation, carburetor replacement possible fix
Просмотров 419Год назад
I'm replacing my 65 Mustang carburetor with a new one, the old one is making the car hesitate and stall' while I have rebuilt it and replaced it with a re manufactured one it still has the same problem, I'm hoping this New one will fix the problem as its not re built on a worm out housing, wish me luck LOL. #mustang #carburetor #hesitation
How to replace a Side Cover Gasket on an inline 6 cylendar
Просмотров 1,6 тыс.Год назад
So you know about valve covers but this is a side cover, aka push rod cover aka lifter cover, on in line 6 cylinder the lifers are not accessed from under the intake manifold like a V8 or V6 , they are way down low in the motor and are accessed by a cover on the side of the motor, as they get old the gasket will eventually start to leak just like the valve cover gasket on the top of the cylinde...
How to Fix Foggy Headlights For Good
Просмотров 366Год назад
If your headlights are foggy and its hard to see at night this is one way to fix that for good. You all know what I mean, fogged over headlights are not only not safe but they make your car or truck look bad as well, you can polish them but then you take off the UV protection {that is most likely gone anyway by now} and you will have to treat them with protectent about every 6 months, or within...
OEM Look Double Din Head Unit Install in an OBS Ford
Просмотров 9 тыс.Год назад
I install a Double din head unit into a 95 F150 OBS Ford and make it look OEM like it came from the factory that way where a single din was all that was available for these OBS Ford trucks and make it not look aftermarket. I use a couple of Ford trim pieces and fiberglass them into a double DIN opening so that I can install the Atoto F7 head unit I got for it, but I want it to look factory Merc...
Ocean City MD Spring Hot Rod Weekend 2023
Просмотров 211Год назад
Ocean City MD Spring Hot Rod Weekend is a long weekend of all kinds of classic and hot rod cars on the street and in the parking lots everywhere, the show is amazing, so sit back and enjoy Merch is back at aintscaredgarage.creator-spring.com
Painting the Lower Grill
Просмотров 405Год назад
I try out my paint gun for the first time and repaint and attach the lower grill surround on my OBS ford F150 Flareside pick up, it turns out nice Merch is back at aintscaredgarage.creator-spring.com
OBS Ford F150, core support, Water Pump and Thermostat replacement
Просмотров 367Год назад
OBS Ford F150, core support, Water Pump and Thermostat replacement
Welding Up The Rust Holes on an OBS Ford Rad Core Support
Просмотров 602Год назад
Welding Up The Rust Holes on an OBS Ford Rad Core Support
Ford 4.0 V6 Thermostat housing leaking
Просмотров 6 тыс.Год назад
Ford 4.0 V6 Thermostat housing leaking
Upgrade your Bumper Cheep, Custom OBS Eddie Bauer Bumper
Просмотров 1,9 тыс.Год назад
Upgrade your Bumper Cheep, Custom OBS Eddie Bauer Bumper
Water on the floor on an 05 to 09 mustang, easy fix
Просмотров 591Год назад
Water on the floor on an 05 to 09 mustang, easy fix
Steering Wheel Buttons Not Working, How to replace a Clock Spring?
Просмотров 1,9 тыс.Год назад
Steering Wheel Buttons Not Working, How to replace a Clock Spring?
How Replace U Joints, using simple tools
Просмотров 262Год назад
How Replace U Joints, using simple tools
Ocean City MD fall cruise weekend Endless Summer 2022
Просмотров 395Год назад
Ocean City MD fall cruise weekend Endless Summer 2022
My clutch line just popped right out of the socket
Просмотров 1,1 тыс.Год назад
My clutch line just popped right out of the socket
Knock Sensor replacement, How to replace the knock sensor on an OBS Ford Truck
Просмотров 8 тыс.2 года назад
Knock Sensor replacement, How to replace the knock sensor on an OBS Ford Truck
🙉😖
Can't find a vacuum canister that fits my 89 town car. Called many junkyards. No luck. Any ideas where I could find one?
Actually yes, you can use any vacuum canister from any manufacturer as long as it has 2 vacuum ports on it, there all the came inside
What about ABS?codes
I don't think it reads them but I'm not sure, I know on this crazy truck of mine, after I unpluged the ERG vacuum and took it for ride for a test, the ABS light came on, not the Check Engine light, so that's got me stumped for now
Does anyone know the measurements on that “washer” he made that goes under the shift boot? I’m fabricating a cup holder assembly that mounts to the truck by being sandwiched under the shift boot and being bolted down.
I'm not sure what the measurement was, I just copied the base of the shifter boot
Subbed 👍 I have a swb 94 f150 4x4, 5.0- 5 speed manual with that bumper
Thanks for the sub! and the truck sounds cool
This is absolutely insane. Those old mirrors were 10000x better.
Some people think that and that's fine, just not for me, Thanks
Currently replacing the vacuum lines on my 90s F-150 with a 351W in it and the lines are all sorts of fuked up if yall got any tips I’ll take em
There should be a vacuum diagram on the underside of the hood
This is a very well made video, not dragging on, very informative, great results and I can’t wait to try this out. Thank you sir👍
Glad it was helpful!
Your videos have helped me so much with my 1991 f150!
Thanks I'm glad I could help
Does th f250 fit the f150?
It should but I can't guarantee that
Hello....if you dont mind me asking...can you tell me where to find a tonneu cover for my 93 flareside?
Don't mind at all but, just keep looking on the marketplace or ebay, I don't know, there hard to come by, this one came with the truck so I was lucky
It doesn't ever give you 111 unless everything is all right.
I haven't used it for a while but that sounds right
I am doing this on my 91. I am also going to remove the outer door handles and scuff and paint them black. I am taking all of the chrome or shiny stuff off and doing everything 1 color. I like it better, like a 90's sport truck should look.
I like it, but make sure to use an epoxy primer on them so the paint will stay on them
Can someone tell me what the problem is? My hood is aligned perfectly with the rest of the truck but the fender gaps are horrible
I have the same problem, but I think my cab is all out of whack
Thank you for an informative video. Made it very easy to understand
Glad it was helpful!
I have a vacuum issue behind my plenum that I think may be a small clear plastic box . I'm like you in not wanting to pull my plenum. Trying to find out more info on the small clear box if anyone can help. I'm having unstable idle .
Reach under the plenum in the back, the PCV valve tends to come out of the Valve cover, you should be able to feel it there
Where can i buy the parts ?
I got the carpet on Rock Auto and sound deadener on Amazon, the rest was just a matter of cleaning
Take it easy bro your going to start farting you have people watching you
Ha Ha, I'm hip
Veddy nice
Thanks You
thank you boss!
You're welcome!
Solid build
Thanks
I have a problem with my 93 f 150. On a cold start it starts right up. I leave it running and after 10 minutes or so battery gauge starts sputtering and eventually the truck turns off. Or when I'm driving around, come to a stop & I put the gear from "Drive" to "Park" it does the same thing,, battery gauge starts sputtering and turns off. What could it be?
Thats hard to say, the volts may be doing that because the truck idle is getting ruff before it cuts off, I would start looking for vacuum leaks, these trucks are famous for vacuum leaks.
What is the black glue stuff?
That's called Liquid Electrical Tape, you can get it at your local parts store, Just be careful with it so you don't get it inside the Vacuum line and clog it, Thanks Ed
Almost sounds like a fuel problem check the pressure regulator the filter or pull the pump out and check the sock filter on the pump might have trash in it restricting the fuel flow
Thanks
Do you still have the old mirrors?
Not sure but if you're looking for a pair there a dime a dozen in the junk yards
Chingon great job
Thanks
how come you didn't show the vacuum line running to the vacuum reservoir on the side of the airbox
I did another video befor this that may be of help, ruclips.net/video/Nb97UmrbAN0/видео.html
Did you ever find out what was wrong
I wish I could say yes, but No, still hesitates and stumble sometime while driving, I think I'm going to get a Motorcraft distributor and give that a try, the after market one I got was not well made and may be the issue, but when I do I'll post a video on it, there has to be an answer, the rest of the truck mechanicaly is now like a new truck, I just cant beet this damn hesitation, Thanks for asking
I hope this helps my 03 vic all blowers blow but the main vent
That should do it, they are basically the same cars, the Mommas has ben working like new sense I did this to it
How to you install the hood support springs (coils)? I broke my originals and I need new ones. Do they bolt right on or do I need to do something to tighten them after installation? If so, how does that work?
I would go to a junkyard and get a goodset from an old truck and just bolt them on
You did NOT need 2 remove fender or light. tisk tisk
That repair was done long before I put a light in it, and I was replacing the fender so it just made it easier as I was going to have to take the fender off anyway
Ed good car show .like the way you adjust the rear bumper keep it up
Thanks Billy, one of these days I m going to roll pan it and lose that pretzle of a bumper completely LOL
I bought a f150 last month and I cannot find the OB 1 port under the hood . It is not where yours is. could ford have put it in another area?
What year is your truck
I thought i recognized that accent then I saw the flag, lol. I'm in Florida these days, I picked up a 1994 short bed with the 4.9 every project video i've seen you doing i've had to do on my own truck. Wont be long and you'll be doing an ECM capacitor re-solder video. Earned a sub from me.
I actualy started that even though they were not leaking LOL
German spec. LOL. I'll have to remember that.
Yup LOL
On some cars with drive by wire... Cruse control is nothing but reprograming modules and adding buttons to an already in place wire harness. Same thing adding other options on newer cars like fog lamps. Many times the wire harness are the same with unused connectors hidden.
Thanks
I just finished putting new bearings, races, and rotors on the truck, also replaced the ball joints, and axle pivot bushings, kicked my butt. I never have tried the cruise control on my truck lol. I should check that out.
It's fairly easy
I believe i just found a new appreciation for my factory cruise control after seeing your struggles.
It wasn't that hard, if the clutch sensor hadn't been butcherd, it would have been easy, thanks
Nice job Bill!
Thanks!
and they're all there
Yup
Between mice and men, we all have cut wires. Nether knows what they do
You are correct my friend lol
just now popped up in mine glad to see you back
Thanks, it was a hard winter, lol
looks good keep them coming sure like the video Bill
Ed !
Thanks, will do!
GOOD JOB!!!!
Thanks
just repainted and reinstalling my side cover tomorrow. great video! i removed my distributor cap as well to make things easier
Nice work!
So you didn't finish sound deadening the floor before you put the carpet in the seats back what that means when people do that it means they'll never finish it the sound deadening should have been finished before carpet and seat went back in
Actually it may not have been in there, but my buddy Paul and I sound deadened that whole truck, roof, doors, back wall and the whole floor, and you are right, if I hadn't I most likely wouldn't have finished it, I don't think I did a video on that, but I assure you, its got killmat or whatever I used everyware. You can see it in this video ruclips.net/video/GRO_GXkyFis/видео.html
Ohhh no, I can’t believe you’re actually going to do this! Making it look like Jethro’s hillbilly truck🐸
Well thanks for the comment, but,I got to say, if anything would make it look like a Jethro’s hillbilly truck its them ugly swing locks, but everyone is entitled to their opinion, so if I were you I wouldn't put them on you truck, it's fine, Thanks again
Why bother trying to putty a stupid mirror anyway? Your truck is still going to look like poop anyways after you put those stupid things on it!🤮
Thanks again
Your determination to make that truck look stupid is unrivaled 😝
You are correct my friend, And I love my stupid truck, LOL
Put some more lube on it! Hahaha🤪 You stripped it using all that lube spray😂 ha