Видео

A Question Was Asked: Can I Colour Tool-Paths So As To Highlight The Levels? This is my attempt; You can choose to colour your Tool-Path in any colour you wish. RUclips: ruclips.net/video/ltvKunmjW7Y/видео.html Facebook: If you wish to download the File. groups/1575539446047424/permalink/3484864945114855/

How to Colour Tool-Paths.

In reply from a question on Facebook. From: John on Vectric Tips & Tricks - Aspire, VCarve, & Cut2D OK Brains trust, I need some help. I'm trying to create a tapered square pocket, but the taper isn't uniform on all sides. On the sides the taper spans 12.5mm, on the top and bottom it spans 5mm. I've set up a three moulding Toolpaths, one that goes around the entire inner square with a 5mm wide,...

aeknarin tom D I Y Hello sorry i can't Rename and open. can you show me? I have tried many times

The "Lesson 10 ZIP" Folder contains all the Information & Files you will need. It can be Downloaded from "CNC Wood Carving UK". groups/1575539446047424/permalink/3148945092040177/

This is the Third and probably the best method to Rotate your Job. In this Exercise I shall show how to add some Lua Code & a Dialog to Your Post Processer. So as to make Rotating your work so much easier. This is an Option that I believe should have been included in Save-Toolpath, perhaps Vectric are watching. Files can be found here, CNC Wood Carving UK: groups/1575539446047424/p...

Two Post Processer. Rotate Your Job in Mach3. Mach3 Rotate 0 (mm G55).pp Mach3 Rotate 90 (mm G56) Of cause it would be nice had Vectric had a Button on the Output Section { Rotate 90} groups/1575539446047424/permalink/3108440712757282/

I have seen many posts inquiring on how to rotate a job in aspire or VCarve. This can be a lengthy process, which Leeds to an untidy drawing. ► Method One: Rotate Your Drawing in the CAM Program. ► Method Two: Rotate Your Job in Mach3, using G68 R90.0 Of cause it would be nice had Vectric had a Button on the Output Section { Rotate 90} groups/1575539446047424/permalink/309906435369...

With Thanks to Vectric. Facebook : CNC Wood Carving UK groups/1575539446047424/permalink/3083680058566681/.

Do you know exactly how to change the Homing Sequence in Mach3. I would like it to be x,y,z. Actually, its always best to Home Z first, as it moves the spindle Up out of the way of any Clamps or Obstructions.

This is How to add another File Extension to your “CNC Code”

RPM

The Aspire File CAM be found:- groups/1575539446047424/permalink/2829991173935572 Wealdentool, www.wealdentool.com/acatalog/Online_Catalogue_Large_Ovolo_Round_187.html Trend-UK, www.trend-uk.com/en/UK/productlist/4/68/Ovolo_and_Round_Over.html Ebay, www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1311&_nkw=round over router bit&_sacat=0 Ogee Cutters Trend-UK, www.trend-u...

Corner Rounding Cutter.Movie 1 & 2 The Aspire File CAM be found:- groups/1575539446047424/permalink/2829991173935572 Wealdentool, www.wealdentool.com/acatalog/Online_Catalogue_Large_Ovolo_Round_187.html Trend-UK, www.trend-uk.com/en/UK/productlist/4/68/Ovolo_and_Round_Over.html Ebay, www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1311&_nkw=round over router bit&_sacat=0...

Tool Renumber Your Tools In your Tool-Paths List.

Rest Machining

3b Book Tutorial Project

3a Book Tutorial Project

2b parchment tutorial project

2a Parchment Tutorial Project

1b Display Scroll End

1a Display Scroll End

Halloween 2

A4 Draws

A3 Cabinet

How to Copy a Drawing File

New Basic Tool Changing Mach3

New T-Slot

Overview: Would you like to Customise your Screen-Set?