Видео

Idk if you still active on YT but i have a question. I used your video to do a connection few month bach and it worked like charm, but now i cant figure out how to make it work. Same laptop/cable/ car. I just wont connect, doing exactly like you show. F15 i50.

I have this sound but quitier and only if the engine is cold. It is time to change? If I drive 5-10 km (depending how cold is the outside temp) the sound is gone completly. Upper tensioner was changed, sound remained. Oil changed every 10k km or less, only 5W30 BMW-LL04 Chain was changed to the improved one by former owner, but I do not know how many kilometres has got this chain set. Now 335000km and driving daily…

Magyarul

Just change tensioner.

hi, having same issue and codes , could you please advise is there only 1 NOX sensor or multiple ? and where abouts in the system is it located ? thanks

How did you know the access code was 26?

So its not the ticking but this metal clanky sound am i correct? Am also very paranoid about the chain especially when it gets cold and the engine sounds Like a tractor

I have the same engine on my bmw e90 its n43 the thing is I got misfire on cylinder 3 error changed the injection on that one all was good but after 2 month car is shaking white smoke from behind when the engine goes at 60oC all is good the car is running like is supposed too. I dont understand though what is this message 0219-08-0004nox error and I dont know whats wrong with my car this happens always when the car is cold.

Thanks for sharing! I would love to have seen the "before" as well 😊

Hi, When you change Nox sensor, do you have to do anything on ISTA+ after?

What a joke to find that stuff out 😂

Awesome! I’ve a 225d 2017 coupe 2 series I think it’s the F22 The button cruise rocker as warn and I also need to do this, my question is is it same as this as we have different models but steering wheel looks same. I also just need to change that button. It’s only cheap on eBay.

Very good video. Fast and easy🎉

ISTA - ENET - Laptop without RJ45 - Using a USB to RJ45 converter does it work ?

You actualy don't need to remove an airbag or even unscrew the button unit. You just remove that silver trim around this button, use a 2 screw drivers from both sides of a button and it pops out easily. 3 min job 🫣

This video helps me a lot. Thanks dude you’re a star

any idea on how to show the temps from metric, trying to change it from C to F in my car.

now my trun i must repair chain omg !

Anyone know how to remove the button group if you have paddles on the back of the wheel? I have removed the paddles and there appears to be no way of unscrewing them from the back. There is no hold like in the video.

Hear no difference either way

Good

Thank you very much!

Must Change to Toyota - Lexus

I had same sound at cold , replaced the upper chain tensioner and the sound is gonne , but i have one with I rpm from 1 to 3000 ....

Thanks for this. Was unlucky enough to snap my timing chain not knowing this was a weakness with the car a while back and had to replace the engine. This saves me from a lot of worrying

Thanks you ! 🎉 10 hours for found your video and connecting my car with 10°c 😭😭 Thanks you so much ❤

Hey, i have a problem, my ista doesnt go past the step at 1:46. it Shows my car and as i Hit connect it goes back and say Check egnition. And idea How to fix this?

Where cane I find the part ?

The engine sounds perfect now

Thank you sir. I cut the time a lot.😊

which device are you using for error reading thanks in advance for reply

Just changed mine - thank you!

this just makes BMW the most uber morons in the complete auto world.... WHY THE FUCK YOU HIDE THIS???? PS bought BMW 1 from 2004(!!!!!) like 2 weeks ago, PS AMAZING VIDEO BRO!

Mine has similiar sound but it disappears when engine warms up. Is it timing chain?

does the button feel like the original ? is it soft rubber like original og harder ?

Hello! And sorry for the trouble.. can you tell me exactly where this sensor was!?

Isnt the C engine supposed to be better at staying alive than the A one?

It still doesn't show on my computer

How much did the repair cost?

👏🏻👏🏻👏🏻

Hi, i’m having the same problem like yours with my e61 5series with the same engine. I think i saw also 1 nox sensor on ebay from germany but it has different partnumber. Would it effect the working or is it okay I’ll buy it? Thanks in advance!

Can i have a 99 with a flake please

can you just do a software nox delete?

My car idle is weird, when i accelerate harded to like 3-4k rpm and then put it in neutral gear, it stalls. Only codes i have are NOx sensor related, could it be the issue?

Thanks mate

Which is the latest version of insta -d that works with both interface cables, ​

I've had thissame infamous swishing sound for 3 years now and i've been kinda worried it's the chain. It's been getting much worse this autumn and today I finally got up to checking it by taking off the belt and the noise is completely gone, no swishing sound. The belt itself was from 2008 and so is the car so the pulleys are likely original too. Bought new tensioner, delfection pulley and the belt and gonna change them tomorrow. Hope this fixes it.

best oil for n47d20c is LL04 0w30, 5w30 or 5w40?

hi could you tell me exactly the steps/clicks in order to get in ista+ to check the egr valve please? can't find it asap please if you can many ths

Thank you very much for this video! Thanks to him, I was able to figure out why there was no connection between the program and the machine. Instead of USB, I have some other connections. After disconnecting one of the connections, I was able to see the machine in the program and connect.