Видео

I know it’s not easy to get a hold of every possible gun, but I would have liked to have seen you test the p10F comp ready 5” version and the G34, since you’re already using 5” versions of the PDP, and M&P. Either way, well done!

Also mine is from their new factory in TN

SKU 14122

How about the 2.0 limited edition

The pin that you refer to as being out too far is supposed to be that way. If you notice, it fits right in that little notch on the takedown lever. It acts as an overtravel pin for the take down lever.

Black paint is cheaper than new sights

My older one has same controls but with hinge trigger put in Apex better than 2011

I never had issues with the stock striker. I bought it in 2021. I used the training bullet when dry firing just like the manual taught me.

Wilson Combat can not be beat to me 😊

Even when I look at the Mil/LE side of their website I can’t find the SKU for this all black one. Can you tell me what it is? I’m only able to find the 2.0 with the new serrations in FDE.

Nice vid, just subbed. Heard there is a tiny internal spring that makes these guns drop safe and it may not always be assembled properly from the factory?? And that apparently even cleaning the gun could mess up this spring too?

great review video. Unbiased and real talk.

I put a Jentra g41 tungsten guide rod and overwatch striker/trigger and SCS and my p10 is the best shooting pistol i have, absolutely love it.

Kill the background music. It's annoying.

Hi, i am an Argentine Shooter, i have a czp10F. Can you please list the accesories installed and the vendor names? Thanks!

Is this video mirrored or are you also left handed? As a left handed shooter myself, I'd love to find and follow more content creators that deal with the same struggles haha

Spent $500 for P10 f or sr and little disappointed. Trigger isn't the way I expect it. It more like glock than walther or canik.

2k rounds out of the p10s and I’ve not had a single malfunction

Appreciate the review. Can’t fully attribute any issues to the gun itself when changing the internals. (I’m also not a gunsmith by any means)

I spent that money. Firing pin broke First range trip. 😂😂😂😂. They fixed it hard for me to edc it now because of that

Thanks for sharing your experience. I own both models as well, but have not put this many rounds through them yet to notice these issues. I have an OP trigger and NP3 striker on the C since I carry and shoot it a bit more than the F. I’ll have a look at the OEM striker and see if I can spot abnormal/excessive wear marks. Subbed! So now you owe us a video on the CGW striker 😁

You should throw the echelon into the mix and see how it stacks up 🤙

What kind of holster are you using for the fn 509?

Can we hear how much noise in the trigger group bring loose?

Hi friend, do u have ins account?

Where did you get that Yukon Cornelius sticker? 😂 Great comparison 👍🏼

The HLX is awesome.

Thanks for making this review. Have been using SKU#11828 + Apex trigger for about 3 years and the gun is great as a carryable competition gun!

Totally agree with you on customer service and gunsmith, I emailed Ian and he's extremely helpful on what he can do, sent my compact pro back after 150 rnds, it was painful at range visit, I was shooting 115 grn Remington green box and every single shot did not cycled with any of 5 mags pistol came with, to top that off, when I got home and disassemble the gun, inside the slide was so worned out it looked like my 65 year old colt 1911 I inherited from my dad back in 80s, inside magwell was so dinged like I've shooting 20 races back to back but only less then 10 mag exchanges(total of 150 rnd), I sent it back, they had it for two and half weeks until I reached out to Ian and he said gun is ready to be shipped out, and unlike what I expected, they said inside the slide is normal wear(I have thousands of rounds through two of my Staccatos with absolutely no wear) and magwell was all dinged out and they didn't touch anything. Pistol still fires single shot and has to be racked every single time to cycle. I will order a new magwell from them and try to trade or sell this disappointment of a "modern gun".

In regards to handguns, I prefer to keep the mag release on the left side and hit it with my index. As for slide release, I run enlarged designs like what is found on CZ-75s as my index easily locks and drops it.

As a southpaw, I run the ADM UIC. Having been an AK, ACR, Bren 2ms, RDB runner, I like the lever design. Like the sig spear, silencerco, griffin, etc. I don't find it that hard to reach and I don't have large hands. I do agree that the lever should be mirrored.

I’m a lefty I only buy fn and Glocks 😂😂🤔

CMMG is so far the best ambi mag release I've ever used as a lefty. I tried the fcd mag release but like you said they put the button way too far back that it was unnatural for me to reach back to it

Thank you for your video. I'm a lefty shooter from my eyesight not dominant hand, curious but it is the way it is, either way, very much appreciate your time and efforts in making this video as well as the useful information you shared. Have a blessed day,!

What’s the best out of the pdp cz and smith?

Appreciate the break down. Also I appreciate the fact you explained why YOU like it. Amazing job!!!! You have a new subscriber.

Great video. I’ve been wanting a video that shows all of these full-size pistols with lights and red dots for visual reference. Good explanation of your thoughts and grading process. I wish I could have them all

Fun video. We have versions of all these pistols, and I have to admit, after shooting so many guns, for so many years, they are all kind of bleeding into each other. I don't know that I have a preference between them anymore. Really cool breakdown and points system. Keep the vids coming. Subbed.

Thank you for the video! i am looking for a slim grip, which one is more slim? tried to look online but hard to find the info...

Own both Brower is my choice hands down

Hello sir! Quick question! Trying to look the sku number on gunbroker just to see. Did you just type it in the search box and a listing popped up?

On your OA2311 video I heard you mention getting the 2022 Fn hi power optic cut. GOOD SIR…. If you know someone who can do that cut please pass that info 😂 mine has been waiting in the safe for 2 years to get cut 😂

I am considering buying one of these pistols. I can't seem to find out what the "matte black" finish on the slide is. Do you know? Is it similar to Cerakote?

Thanks for the video. Wish the Wilson Combat would work with the Cali Compliant M18, so been checking out the Brouwer, which I believe is compatible. Yeah, Cali BS sucks, so pray for us who choose to fight the good fight here.

Don’t know if you will see this but I figure id ask. I was wondering if the Brouwer grip palmswell is thicker than the stock m18 grip? Thanks for the video!

I Ponder the Gat wayy to much lmao.

Wilson’s doesn’t feel like a 1911 at all imo even though they say it’s supposed to. It’s also far too thin for my tastes. The Brouwer fills the hand perfectly, it has the best pointability out of all the polymer grip mods and it’s also of sturdier build quality. The stock texture isn’t great but it’s usable. I’ve been throwing self adhesive hockey tape on all my pistols regardless so it’s not a big deal for me but their laser stippling looks fantastic. It’s the only grip mod that naturally gives me a high grip. I also cannot stand the side panel designs on the Wilson. Makes it look like a BBQ gun a boomer would rock in a leather holster to me lol. If they offered a less flashy side panel texture and a Large version that filled the hand better it’d be much better. I’d still grab the M1811 probably.

can you use normal 17 round magazines with a brouwer magazine well?

Great comparison

Thanks for the comparison! I love shooting 1911’s, just ordered the Brouwer with magwell extension for my CA320.