Видео

Hi, Currently this full DIY towbar kit with wiring is $897. See the link to the item. If you have any questions please reach out. www.towbarsaustralia.com.au/products/towbar-kit-mg-zs-suv-1

Hi, At the moment this towbar is priced at $404 for the full kit with the towbar, plug in wiring and a 7 pin flat plug. Here is a link to the product. www.towbarsaustralia.com.au/products/towbar-kit-3-also-fits-sp25-bl If you have any futher questions please don't hesitate to reach out. Towbars Australia

@@TowbarsAustraliayoutube Thanks for the reply. Since I'm not familiar with the installation process: does the wiring automatically handle parking sensors?

@@canmetan670 This wiring is plug and play but does not deactivate reverse sensors.

Thank you for your kind comment.

Hi, The towbars we use for the Tesla Model 3 replace the impact beam. If there is anything else we can help out with please ask. Towbars Australia

Most trailer wiring harnesses do not have a reverse wire as trailers typically do not have reverse light.

Hi, There are 8 bolts. 4 in the front and 4 in the back. Thanks Towbars Australia

When it comes to choosing a DO35 hitch with or without the handbrake assembly, it primarily depends on your specific needs and preferences. Here are some reasons to consider each option: With Handbrake Assembly: Added Security: The handbrake assembly provides an additional level of security when parking your trailer. It allows you to securely lock the trailer in place without relying solely on the towing vehicle's brakes. Legal Requirements: In some regions or for certain types of trailers, a handbrake assembly might be required by law for safety and regulatory compliance. Convenience: Having a handbrake assembly can make it easier to stabilize the trailer when unhitching or hitching up, especially on uneven terrain. Emergency Use: In the event of a failure in the towing vehicle's braking system, having a handbrake assembly can serve as an emergency brake to prevent the trailer from rolling away. Without Handbrake Assembly: Simplicity: A DO35 hitch without the handbrake assembly can be simpler in design and operation, which might be preferable if you value simplicity and ease of use. Weight Savings: Removing the handbrake assembly can reduce the overall weight of the hitch, which may be beneficial if you're concerned about the weight of your trailer setup. Cost: Hitches without the handbrake assembly are often less expensive than those with it, so if you're on a budget, opting for a simpler model could save you money. Compatibility: Depending on your trailer setup and towing vehicle, you may not need or prefer the handbrake assembly. If your towing setup already includes adequate braking systems, you might find that the handbrake assembly is unnecessary. Ultimately, the decision between a DO35 hitch with or without the handbrake assembly comes down to your specific requirements, budget, and preferences. Consider factors such as safety, convenience, regulatory requirements, and your towing setup when making your choice.

@@TowbarsAustraliayoutube THanks very much for detailed response, I'd come to you if you were in WA

@@mindofown You are most welcome.

Fitting the hitch with the nuts to the top looks very sloppy. Why wouldn’t you fit them underneath??

@@TowbarsAustraliayoutube I got one with a hand brake in the hopes it will have a lower profile for opening the back door of my Pajero, but now not sure if it will fit. Will find out this weekend when I try fitting it. Luckily its easy to remove and can look at doing something later or getting a specialist to change the hand brake, which in my case might involve cutting the mounting plate, something I really don't want to do on my 2 month old MDC camper! I got the DO35 because my camper came with a polly block and I need to change the ride hight for better towing.

Hi, The towbar kit for this one is $915 and it is $200 for installation at our Caboolture QLD store. If you order or book before Tuesday we currently have a 15% off Easter promotion which would bring the installed cost doen to $947.75. Saving you $167.25. Please reach out if you have any further questions.

Hi, We have installed many towbars and wiring to the GWM Tank300 with no problems at all. You can deactivate the Rear Cross Traffiic Alert with brakes through the entertainment system. I hope this makes sense. If you have any further questions please reach out on 1300 TOWBAR that's 1300 869 227. Towbars Australia

Hi, Unfortunatly the manufacturer of this towbar does not supply the 13 to 7 pin adaptor. I'm sure these could be sourced and used for your wiring installation if you preferred. Towbars Australia

This adapter cost $10 at ali. So whyyyy? ​@@TowbarsAustraliayoutube

$17 delivered to buy 13 pin to 7 pin flat

Hi, Left indicator was into the Red Yellow Wire in the Black Plug. Right indicator was into the Red White Wire in the Black Plug. Tails was into the Yellow Red Wire in the White Plug and Stop was into the Grren Black in the White PLug. I hope this helps. Please reach out if you have any further questions. Towbars Australia

What about reverse wire?

Hi, We have done many different hybrid models and this towbar is also compatible on the Tank 300 hybrid. Please reach out to us on 1300 TOWBAR or 1300 869 227 if you have any further questions. Towbars Australia

Hi, We can certainly help with this. Here eis a link to this towbar. www.towbarsaustralia.com.au/products/towbar-kit-getz-3-and-5-door This is for DIY if you would like us to install at Caboolture QLD you would be looking at $150. If you have any further questions please shout out. Towbars Australia