Видео

Dude, lifesaver. Seriously 😅

Truck driver here. It`s a good video. I had no idea that the oil hub could be replaced for grease.

You know anyone that knows about this of the truck, the passenger side front axle gets locked but once above 4 kmph its okay

That's a very common issue , that valve is problematic

Dude thank you thank you thank you! This just saved me days of frustration more than likely. Much appreciated!

Thank you

Man This is the problem of the chenglong dump truck I am driving , the mechanics been working more than a Week , they change the two check valves because its leaking air now the other valve not leaking any more only one left both new but it still leaks air they change one the faulty brake chamber but still the valve still leaks and the leaks get stronger when ever I press the brake

lmfao the end of the video was my favorite part

great advice , i bet a lot a shop will charge you to put a new abs valve plus the hoses to charge more $$$ , tip --always have tools w/you to check things by yourself

Nice!

Bracket chamber has what is called a pan cake over time it will delvop a hole just replace pan cake rubber a 20 minutes job if you know what to do

Is this with service brakes applied or not? My ABS valve leaks with service brakes applied

Using that method was the fastest, easiest, and best that I’ve ever seen! Thank you for sharing.

It's not a check valve it the diagram leaking for the park brake so air is getting into the service brake

Do you have to fill the hole with hung with semi fluid grease. Shouldn’t we leave some space inside as to not create too much pressure.

Just had this issue/solved on a ‘17 Mack Cxu612 I pinched lines at chambers at nothing. Put my hand over abs valve and saw chambers moving. Went to quick release valve that supplys air to emergency side of chambers which sits behind 5th wheel and pinched the lines with then the ABS valve stopped leaking . Removed quick release valve and blew air into it and was restricted some . Replaced quick release valve with both 90° fittings and retested. No leaks returned to customer

Puppy's p⁰p00⁰

You just saved me, I was 1 mile from thermo king And I watch this video before I get to thermo king and get what my fucking refrigerator starts in 2 minutes brother thank you for making these educational video you're a fucking crack yeaaaaa I saved my money 😂

Ok men i have same problem the mecanic change 2 chambers drive side but still doing now changes after 4 months changes the others 2 and valves but now when i pulls trailer brakes drain air from my safety valve like 2 or 3 seconds and then put brakes on trailer i though was my valve so i change it and still doing tractor its mine but trailer company and start drain air after mecanic changes valves in the trailer trailer

What type of semi fluid grease is that? Chevron? Mobile?

Nice. Thank you for this video bro. You saved me money

It doesn't look like the seal was leaking. Good video though

Was looking for a video to help tear down and repack my boat trailer hubs. Interesting how the parts are all the same with the size and weight being the only things that vary. Great video! Thank you.

Great video. I see where I made my mistake. I was squeezing the lines at the relay valve and the sound would change but didn’t stop. Now I will try the same thing at the actual chamber !! Got it. Thanks bro!!!

Does it matter which hose you clamp off?

It's not a pod brother it's a break chamber

Hi This is Abe I have a Dump truck Guys believe me I am working on my Truck for tow days !!! I couldn't find the problem!!! So tomorrow I am going back to my Truck to check it ,, Thank you 👏👏👏👏

Thanks bro

Thank you for this video. This worked for me

I guess Jaws is back 😆😆😆😆🙏🙏🙏🙏👍

Direct to the point..that's great bro

Will this issue cause there to be a abs light on the dash? I have this same issue and have a abs and TC light

👍👍👍👍👍👍👍👍💯💯💯💯💯💯💯💯💯 THANK YOU!!!!!!! I WOULD HAVE SPENT $300 FOR NOTHING REPLACING THAT ABS MODULATOR! $75 FOR A PIGGY BACK BRAKE CHAMBER KIT FIXED THE PROBLEM! RESPECT.

Is it leaking without pressing the service brake? Or with

I learn something today, thank you sir!

My Car Nissan Navara 2014 Diesel 2.5L Gabung problem in air leakage from ABS so what do I need to change actually?

Ey bro I just change 2 seals on a trailer on same axle I put a new one and lead put second one and leak what do you think I’m doing wrong it’s a double not axle torque inner to 200 backed off 1 turn re torque to 50 then back off 1/4 set locking washer torque outer not to 300

Lubricate the ID of the seal before sliding onto the spindle.

First time to see this. I didnt understand it.

Great video, thank you!

Clean axle and wheel hub surfaces with a emery flap wheel on a die grinder . Apply #2 Permatex sealant on the outside of metal banded wheel seals . Clean cup and cone with either . 5/16~18 tap installed in cordless drill to clean out hubcap bolt holes . Apply anti-seize to hubcap bolts . 67/23

Yes agree you pressure the cooler and if the pressure still EGR cooler hood no need the smoke

Is that grease instead of hub oil?

Every how many miles do you do this?

I'm having a similar problem right now on the front.. when I press the brake, it leaks on front left abs

For got to measure the dial indicator ply after torque

My ABS valve blast out air when ever I push on the brakes. Major leak. Only leaks when stepping on the brakes. Tried pinching of air lines, no luck. Will bleed off air tanks in 30 seconds.

Thank you for sharing Do u have a part number for the socket, seal driver And what is that semi-fluid brand if you can share a link. Thank you sir

can a guy get away with just changing the diaphragm ?

So is it the Air Chamber that is the problem?