Видео

Available April 1st!

Mechanical Blade Proponents Fans: "When everything is perfect, mechanicals work just as good as fixed blades!" Me: "Everything is NEVER perfect when hunting."

Great video

As a guide we said middle of the middle slightly forward. Had each client practice on a target with the right shot broadside. The best advice I can give is look at the front legs. If the farthest leg is ahead of the closest leg, do not take the shot, period. If they are even, or if the closest leg is out front that is when you take the shot. The best shot is shooting side leg forward but bears are tricky because they can angle and quarter their body to and away and its less obvious than deer or elk. A lot of folks call this "curling in or out" when the bear will turn its shooter side leg in and curve its body effectively creating a quartering too shot that looks REALLY tempting except for the fact that the bears entire shoulder is now blocking most of its vitals. Ive seen bears take rifle shots in that position with hunters who did not pay attention to the feet... Always watch the front legs... If the leg closest to you is ahead of the farthest take the shot if its not... Its a bad shot. Ive seen too many hunters whoop for joy only to explain to them that the arrow got fur or that they wounded the bear and we have a 12-24 hour wait on a long track.

Well, that didn't turn out anything like I expected that it was going to. Though in fairness, it would've been nice to see how it did with a decibel meter. Someone else in the comment mentioned maybe placing the mic (db meter) somewhere other than right below the strings, which I think may have some merit.

This comment section is wild. The guy is right field points and broadheads should shoot the same. What he failed to talk about is what to actually do.

I had 30 years of guiding bear hunts in Alaska before covid wrecked my guide services. I only lost 2 bears a Hugh Brown bear the client hit to far back on the liver area and a black bear that should have died on the spot but got away and both bears hit by a 300 Wby mag at close range. Due to my requirement the client brings not less than a 338 win mag and preferably a 375 magnum of some kind we never really had many problems looking too much for bears shot by large caliber magnums. I switched from a 338 win mag to a CZ 550 rifle in 9.3x62 Mauser using reloads upped to about a 375 H&H mag commercial loads and I think the 9.3x62 Mauser had the greater edge over the 338 win mag for killing affects. Type of bullet is also a requirement to only use the Barns TSX - TTSX or another brand of copper expanding bullets because all lead core bullets are complete unreliable to not blow up and then fragment causing wounded bears. Before some num nuts wants to talk crap to me here is where you can view my Alaska guide photos on Instagram @ dwayneb1959 so don't even think of writing BS to me

Ravin R29X with 400g factory set up is advertised at 450 fps. This is with a 100g head. I will be using a 150g head. So 400g/450g = 0.89 0.89x450fps = 400.5fps. This, correct?

No, physics for this guy. lol 😂

Blood trailing is hard with turkey, they have so little blood in them

Chris, what is the blade angle for sharpening

Very good!

Thank you

Okay so I’m shooting a 300 spine arrow with 100 grain field points. Should I be using 125 grain?

are trying to kill Predator or a moose?

Awe, I wanted to see them in action. For practical purposes of course. No heads popping, 😢

😢❤❤❤❤

Okay, so for a 380fps crossbow with 180lb draw weight, what arrow and broadhead weight would you reccomend? I have basic little Allen mechanical broadheads and 385 grain bolts for practice and deer hunting but what would I need for if I get to go elk/moose hunting? I'm assuming if the setup can kill a moose, it will kill elk so I'm totally prepared to go a little overkill and hedge my bets. 😅 Greetings from Saskatchewa. ☺️

Why would the EXT tip on the hybrid broadhead have worse penetration? Its got a narrower tip so I thought it would have better penetration

So buy a single bevel got it.

No mechanical here rather chip rocks.

We fussed over this 25+ years ago. I was always and still am a believer in weight and momentum. I was shooting 550gr arrows when all the cool kids were going to lightweight super fast set up. I see videos of "pros" shooting deer with fast set ups and i always smirk when I see an arrow not achieving a pass through......Ive never had an arrow not pass through......except a frontal shot on a moose.....got over 40" of penetration...not sure a light set up would have done it. Shot a 400+lbs bear last spring and had to dig the broadhead out of a log with an axe on the other side. To each their own I guess. Have fun and shoot straight! Cheers

lol that last broad-head 😅

I bet that would make a good wood splitter

Just the tip matters!!

😂❤❤❤

Awesome

Ranch fairy should tell you enough, he is so self righteous. He shoots hogs in Texas period.

Fred Bear killed a mature bull elephant with one arrow in the late 50s or early 60d with a recurve bow at maybe 65-70 pounds. 2 blade bear head or a zwickey. And you people wine about silly, makes no difference crap. Your why of thinking native Americans couldn't have killed a squirrel

This is the absolute best video on setting a speed ring!!!!

Hey I am fairly new to archery, trying to get my practice in before turkey hunting. Currently using a 30 lb draw weight recurve bow. What do you suggest the best grain arrow would be with which broadhead?

should rename video to k2 commercial.

This is great, thanks for the laugh

Great explanation!!!

Just the ....

Great video. I started in archery when I was11 years old, I’m now 51 and new to crossbows. Would you use the same principal to tune a crossbow as the compound?

That broadhead is big

That's a spear head😂

Ranch fairy is still gonna say it’s not heavy enough unless you’re shooting it with a piece of 32in pipe for an arrow

Nice!!!

Great explanation. Finally a company that tells us how it is. K2 200 grain and a Wicked Ridge Furry 410, total bolt weight is 600 grains.

Please tell me this is a joke. What in the same hill do you need? A broad hit the size of your head for

Just the tip

🐮 💩

Im ready for the nuclear tip

About to move to Texas 😂

This was a very informative video. I'm a new hunter and I'm actually out in my blind now in the rain!!! This answered the questions that I had and some that I hadn't considered. Thx

April 32nd 😅

increased speed does not sacrifice penetration, it improves it. Double the weight you double the energy; double the speed and you quadruple the energy.

is that real