Видео

My problem is working with SPF pine. I cut them well for the frame. Eyeballing down the 2x4s they didn't look much out of shape. When I attached the two long sides to one of the short, then went to put the last short on, it was then apparent that there was some twist and crook and enough, as it turned that if I could attach the last piece, the whole frame wouldn't sit even. As the frame is free standing (a shelf over an old style wooden tool chest 43" x 26" and about 50" vertical when open) and so I can't use a wall and pull the frame to that. My garage is not ventilated and it has a 2 celcius difference between ceiling level and work bench height (if it has been not opened for a while). With a brush type concrete finish for a floor (for safety for my father-in-law), the floor isn't a great place to put weights on anything you don't want marked up. I don't have 4 or 5 weeks with the wood under some weight and the cost between SPF and hardwood kiln is vast. I can get C grade pine 2x4s but I'm not sure if I bring it into my environment if it will suck up moisture and start moving around before I can get the frame constructed....

So much information and an outstanding video on how to do it. As with all experts you make it look easy. I have some old windows to redo here in France so can’t wait to try your method. Thank you so much for all your explanations👏👏👌👌❤🤞🤞🤞

Good man 👍

This is the video im looking for. Im currently on transition of transferring to our new home that is an old house and need fixing. I aporeciate this tutorial so much. I just need to find now that glazing putty.

Is there a reason why you don't use the other side of your knife?

Wow, what an AWESOME video, Dooey! Thank you sooooo much for taking the time to show us how to do this wonderful restoration process.

My panes are incredibly old. Id imagine they would break with that pressure.

This guy is right on! So good to see a window painter with experience and good sense. No tape, no razor blades. Seals up the joint at the glass and then doesn't disturb it. Go ahead everyone. Aquire some skill!!!

Excellent.

Brother this is damn satisfying to watch, I just did a small bottom piece with butyl compound and I’m no where near as clean as this, I think it comes with practice.

I just did this, I read the pack of the linseed oil putty and it said it's not for double glazing so I bought butyl compound for double glazed. It turned out clean but from what I read it said it will never fully dry. I also noticed that my rabbit is pretty worn down and the aluminium holding the double glazing is nearly vanishing because it was exposed for a long time probably some years. Did I use the correct glazing compound for the window type being double glazing in a wooden sash? Any advice would be greatly appreciated.

Have you ever been told you slightly resemble Bradley Cooper in American Sniper?

Great video! Thanks!

Thank you for your amazing teaching video,but when I search"calcium carbonate" in amazon, result show all about whiting teeth...😅couldn't find a ordinary clean whiting power...🤣

Watching your two video about glazing and putty,I like your way of doing work!👍

Ha this is the old "flush" glazing (no stops) method that I haven't seen in 50 years. Excellent. Today there is a "Teflon tool available today that allows you to toll this and a caulking process. This product is a mastic product produced by Tremco in this form, gun form and tape form. Watching finishing of this type of window frame is absolutely excellent. I've been manufacturing windows for 31 years and it is nice to see the good "old" days. If my window designs had this method of sealing the glass today I would have been broke. This method advanced to close cell tapes for frame and glazing beads. However looking back in the 60s we back beaded the window glazing leg with an air gun and 45 gallon barrels of this Tremco product and then a snap in glazing exterior bead. Thinking back to growing up our windows in the house had this style of glazing. 1950 HA. Well 70 years of reminiscing .!!!!!!!

That’s why u never watch tv DIY, cause they no no more than yourself, I’m a painter for 45 years, and the sad thing is everyone thinks they can paint, they think it’s just open a tin and load a brush, which there is an art also, there is pro painters, this guy defo knows what he’s talking about,but it doesn’t mean u will just do as he has, it takes years of experience to be a top decorator, ye this bloke is defo the business, saying that to get to his league , anyone would need to serve there time with him, be his apprentice in other words, I assure u , u won’t do what he’s doin by just watching this video, however most sadly think they will 😂😂

Thank you so much sir for the tutorial. I've been asking my brothers to do my windows 4 some time, but it was of no avail. I so happy that now i can do them my self THANK U.... THANK U ...SIR ONCE AGAIN

Nice job , i wonder if a person had the means just blow the whiting off instead of brushing? Just curious.

GREAT video. I can't find the Rainbow Whitening Calcium Carbonate anywhere near me. Darn it.

Good video.

Great Job!!!

We goy out metal windows glazed, now our dad assigned me and my sister the painting work . Windows are already painted I have no experience or knowledge on this stuff Can you please answer few of my questions please. Should we paint directly or it needs primer or something? What type of paints are best ? Can acrylic paints do the job? (We are going to paint it making it look like wood) whike creating the strokes, if we add water to the paint to desaturate it a bit , will it affect the putty ?

What’s the best primer for glazing?

can you glaze non wood windows?

Can I use this on window encased in vinyl?

Thank you

I am a glazier in North Tx. Alot of our putty glaze windows are 'Steel Skeletons' big divided lite steel bay windows. The putty is thick, up to 1" in width. Its a nightmare de-glazing those. Do you have any tips for those?

really helpful video. thanks.

What glazing product are you using? Ty

thanks for the advice sir

Fantastic demonstration. Thank you!

Ambudextrous? Ambidextrous. I am delighted to be of assistance.

Continence? Contents. I am delighted to be of assistance.

I love that the owner are having a restoration/repair done on these doors instead of replacing them. So wonderful to see someone so capible doing the work. I'm a new fan.

Great video!!! Thank you!

Best glazing video I’ve seen!

I've got a nightmare of a project that needs doing. My casement windows, all 50+ of them, were "glazed" with something that appears to be stucco, is 1/2" thick, triangular shaped and crumbling. I have no idea how to remove this without breaking the glass.

The panes on my casement windows appear to be held in place with thick stucco that is now cracking off. This was probably applied over the glaze. Not sure how to repair.

Where is the building? We own a structure with identical brick but haven’t seen it anywhere else.

I have moved into a "new" house and it needs a lot of maintenance. This is such a great tutorial. Questions though, what is the tool called and how do I find "commercial white" in Australia? I can't afford to have this work done and I can't really afford to wait, windows are falling apart. Thanks for this tutorial, it is excellent.

So many good tips. Thank you! How long before applying primer?

WOW! I have worked on multiple glazing projects and this is the best tutorial I’ve ever seen. Detailed but concise explanations and demonstrations that reinforce skill and process! True craftsman!

What can you put in the putty for it to dry faster.

Dooey you're a cutie ❤

HE CHEATED! I saw him close one eye! LOL Great video.

Hey mate im a apprentice galzier in aus here was just curious if you guys tend to still use back putty over there or are using sillicone to seal the backside of the float ? Cheers

I don't have a rabbet on my interior window to scrape the glazing knife against-I have 4" of wood that butts up against the glass. How do I get an angle out of that?

Just curious....why are you replacing the glazing.putty? Is it degraded ? we are also in South Texas and know the sun is brutal. We are beginning a project where we are using salvaged metal casement windows some were on our building already and some we purchased at Picker's Paradise downtown San Antonio....

wowwwwwwww I Live in England U.K ....... Thank you so Much for your Fantastic Vid ....... that helps me a lot ....... im just an amateur and never really did know the best way to do this .... but your Video has showed me a good way to do it ...... many thanks for taking the time to show us the best way to Glaze :-) ...