![TheAdamBomb](/img/default-banner.jpg)
- Видео 280
- Просмотров 588 928
TheAdamBomb
Добавлен 25 сен 2013
New Deal on Prusa Original MK4! Ends July 16
There's a new promo for the Original MK4 Prusa printer. If you are considering it go to this website for more info. Not an affiliated link, I just want to share some good deals!
Link: www.prusa3d.com/product/original-prusa-mk4-2/?gad_source=1&gclid=CjwKCAjwkJm0BhBxEiwAwT1AXAfHGpa_5ukhaAQyA3UVGKPJ0Amb8DqjarBQQAXmNa28Y630XtxJ3RoCW_gQAvD_BwE
Link: www.prusa3d.com/product/original-prusa-mk4-2/?gad_source=1&gclid=CjwKCAjwkJm0BhBxEiwAwT1AXAfHGpa_5ukhaAQyA3UVGKPJ0Amb8DqjarBQQAXmNa28Y630XtxJ3RoCW_gQAvD_BwE
Просмотров: 134
Видео
3 Upcoming Creality 3D Printer Products to Watch
Просмотров 1,2 тыс.3 месяца назад
3 really neat products are about to hit the market from Creality that you should know about. 2 are already in the preorder phase, but the 3rd is a speculative (yet pretty sure deal) printer. Check it out here and head to Creality's website if you want to preorder the scanner or Ender 3 V3
Purchasing an Infrared Sauna from Wayfair: Review, Assembly and More
Просмотров 5424 месяца назад
I purchased an infrared sauna from Wayfair and wanted to share my thoughts of shipment, assembly and in general my experience of an infrared sauna compared to the traditional dry sauna. Sauna I purchased: www.wayfair.com/outdoor/pdp/royal-saunas-hongyuan-hongyuan-1-single-person-indoor-low-emf-far-infrared-sauna-in-hemlock-rshy1006.html
How to Slice and Prepare Dual Colored Prints
Просмотров 555 месяцев назад
Here's a couple tips and workflow to slice and prepare a model for 3D printing in multiple colors whether it's a dual extruder or single extruder multi-color printer.
How to get Rid of Stringing On a 3D Print After it's Printed
Просмотров 2345 месяцев назад
How to get Rid of Stringing On a 3D Print After it's Printed
Monthly Maintenance on your 3D Printer: A Short List
Просмотров 2,5 тыс.5 месяцев назад
Monthly Maintenance on your 3D Printer: A Short List
Is 3D Printing Dangerous to Your Health?
Просмотров 1,2 тыс.7 месяцев назад
Is 3D Printing Dangerous to Your Health?
Does Enabling Retraction Help in 3D Printing?
Просмотров 8628 месяцев назад
Does Enabling Retraction Help in 3D Printing?
How to Open and Modify STL Files in Blender
Просмотров 6 тыс.8 месяцев назад
How to Open and Modify STL Files in Blender
What is the Optimum Retraction Distance while 3D Printing?
Просмотров 5158 месяцев назад
What is the Optimum Retraction Distance while 3D Printing?
Bite Sized Blender Tutorial: Sculpting in Blender
Просмотров 368 месяцев назад
Bite Sized Blender Tutorial: Sculpting in Blender
Total Scatter Factor ABR Part 3 Medical Physics prep
Просмотров 2108 месяцев назад
Total Scatter Factor ABR Part 3 Medical Physics prep
Phantom Scatter Factor ABR Part 3 Medical Physics Prep
Просмотров 2048 месяцев назад
Phantom Scatter Factor ABR Part 3 Medical Physics Prep
Low Contrast Phantom ABR Part 3 Medical Physics Prep
Просмотров 1448 месяцев назад
Low Contrast Phantom ABR Part 3 Medical Physics Prep
kV Beam Calibration in Water ABR Part 3 Medical Physics Prep
Просмотров 1688 месяцев назад
kV Beam Calibration in Water ABR Part 3 Medical Physics Prep
kV Beam Calibration in Air ABR Part 3 Medical Physics Help
Просмотров 1998 месяцев назад
kV Beam Calibration in Air ABR Part 3 Medical Physics Help
In Air Output Factor ABR Part 3 Medical Physics Prep
Просмотров 1878 месяцев назад
In Air Output Factor ABR Part 3 Medical Physics Prep
Electron Beam Percent Depth Dose Curves ABR Part 3 Med Phys Prep
Просмотров 2328 месяцев назад
Electron Beam Percent Depth Dose Curves ABR Part 3 Med Phys Prep
Treatment Planning for Breast Cancer ABR Part 3 Medical Physics Prep
Просмотров 2488 месяцев назад
Treatment Planning for Breast Cancer ABR Part 3 Medical Physics Prep
Bite Sized Blender Tutorial: Cutting spheres in half, inserting planes and adding color
Просмотров 1,7 тыс.9 месяцев назад
Bite Sized Blender Tutorial: Cutting spheres in half, inserting planes and adding color
Bite Sized Blender Tutorial: Adding Objects and Making a Perfect Sphere
Просмотров 2009 месяцев назад
Bite Sized Blender Tutorial: Adding Objects and Making a Perfect Sphere
Bite Sized Blender Tutorial #1: Navigating and Moving Around
Просмотров 419 месяцев назад
Bite Sized Blender Tutorial #1: Navigating and Moving Around
MOSFETS Medical Physics ABR Oral Exam Part 3 Prep
Просмотров 2559 месяцев назад
MOSFETS Medical Physics ABR Oral Exam Part 3 Prep
Fusions and Registrations Medical Physics ABR Part 3 Oral Exam prep
Просмотров 1859 месяцев назад
Fusions and Registrations Medical Physics ABR Part 3 Oral Exam prep
Bonner Spheres Medical Physics ABR Part 3 Exam Prep
Просмотров 2959 месяцев назад
Bonner Spheres Medical Physics ABR Part 3 Exam Prep
Absorbed Dose and KERMA ABR Part 3 Oral Exam Prep Medical Physics
Просмотров 2369 месяцев назад
Absorbed Dose and KERMA ABR Part 3 Oral Exam Prep Medical Physics
How to Correct White Discolorations or Marks on your 3D Prints
Просмотров 8911 месяцев назад
How to Correct White Discolorations or Marks on your 3D Prints
How to make rounded edges in Tinkercad
Просмотров 21 тыс.Год назад
How to make rounded edges in Tinkercad
What's the name of the guy right there? How about the little blob guy? Anyway, thanks for posting this video. I can now proceed to try 2mm distance if it will make any improvements on my printing. Currently I'm using 0.4mm nozzle as the default that comes with my Ender 3 V3 SE. I'm super curious to test this now. Again, thank you for your evaluation and testing video.
I can't find out for the life of me find how to widen an existing hole in a STL file I have
Worked flawlessly and wasn't over complicated! Thanks mate!
Exactly what I was looking for. Taught me something new also. Didn't know about the outer fill on Tinkercad. Solved a big challenge for me. Thanks.
Why do the horns become less pronounced for increasing D_max?
So what was the actual answer h u h
you're an angel ty
Concise method, concise video. Peak YouTubing, thank you.
Thank you for this information I wanna videos about QA daily , monthly or every years
Free version is not accessible
Can you help me convert a picture to stl
Thank you
i have stls enabled from edit option and it wont let me open anything from my device downloads or anything what should i do
my stl is greyed out or atleast the one i want to open
So I am having a problem once I move the file from inkscape to tinkercad. Once I convert the shaded version of the pic to svg and move it into Tinkercad. I get an error that the file wasn't an svg?
Would the ender 3 v3 ke be better it’s cheaper it has limit rails for x and 1 year warrantee
I think it depends on preference. The MK4 is very well known and loved by many. Personally, my first printer was an Ender 3 and it's been an absolute beast. So I'd prob lean toward the ender, but I've also never had a Prusa so maybe I'm missing out
I bought myself a Ender 3 V3 SE and i must say i cant see any difference between 60-120-180 Speed Quality besides it prints much faster. Everything above 180 for me is a mess since my 3d printer even supports a speed up to 250.
i wish i had money to buy a 3d printer and filament :(
I would look at the Creality Ender 3 ($175) and you can buy cheap filament on amazon for $20. Not necessarily cheap, but more affordable than most thing and that's a quality setup honestly
thanks it is very informative .. from where can i get the electron density value ?
Just what I needed thank you!!
Thanks to your video I finally got my company’s logo converted to an STL for my 3D printing projects! Thank you for the quick and easy tutorial!
Thank you! Smoothing was being totally annoying!!! Blender is hard man!
life saver bro
Good video, quick and effective, thanks!
Double click can also work in here 4:44
How does this work? If I make text little higher than outline... Is it gonna change color on every layer or only change to text color when that color is gonna be visible (higher than outline layers)? I don't want it to change color too often 🤔
Thank you for this! I been having this issue with my Kobra Max. I haven't printed anything for a few months and kept running into issues. So far I haven't had any issues after following your steps.
Interested to know if you or anyone in the comments would recommend this printer for a first time idex user, with a low budget, in june 2024?
He looks sadder every time 🤣
its not about printer , you just use shit program called cura which is so garbage no wonder you got mad
Great I just spent so long time making a custom organization tray, now you're telling me I have to to round all the edges. Why can't the slicer program just get rid of 90 degree angles?
so simple, yet so effective...i needed a smooth cylinder template to use for programs like tinkerCAD and selfCAD and this did the trick! thanks SO much!!!
I preordered one and it’s says delivery October
Same for me, I can't wait 😂
@@nahtanoj92 what are the chances we get early? 😅
@@JustAlb1n we can only hope 🤞🏽
I am confused the difference between W and t
Your videos helped me during my oral exams during my internship.🙏
Those bulbasaurs look like theve been through some shit
I don’t know what the market was like a year ago. Currently Tesla is selling used cars for much less than carmax and cheaper than what private party sellers are asking. I also find non-Tesla dealerships do NOT understand Tesla cars. They don’t know what the rage is or the degradation of the battery. The market is tanking for used teslas.
Of late, I have found that Teslas on Carmax are actually more expensive than used Teslas on the Tesla website with virtually the same details.
thank you! i was looking for advice
You can also with just one extruder do a pause at layer height swap filament for a different color.
Thank you very much! Your video is very helpful!
When I click trace bitmap, the preview is blank. Just white preview. Nothing showing. Why is this happening? Someone please help me
I seem to have non-manifold vertices with the edge split, which causes other problems later on.
"promo sm" 🤣
Thank you, sir! This helped me get around Tinkercad's stupid limitations. I appreciate people like you donating their time to help others learn in the online community.
Good
I use a 0.2mm nozzle anytime I need something highly detailed to come through. Go with 0.1mm layer height and let it go for days.
Thank you
So from that body shop situation you said before that that you notice range difference
Yeah, in terms of my car says I have 300 miles of range but in reality (especially road trips) I really only have maybe 70% of that (just estimating here, don't have hard data)
My Ender 3 was my first Printer and was awesome. I purchased 4 other Creality printers after the Ender and were all disasters. I lost all faith in Creality as a company. I ended up going the Bambu route with their first "go fund me" X1C and have never looked back. Now I have 4 Bambu printers that just work with great software and support. Ender has always done the clone game and now they are trying to copy Bambu but selling at near identical price. Why would I buy from Creality when I can buy the brand I trust for marginally more? Tinkering is fine for awhile, but after wasting spool after spool of filament and hours and hours of time the more expensive printer becomes the economical choice
You lost all credibility when you said Bambu has "great support"...They are known for having some of the worse product/customer support in the business. And just a bout EVERY printer made since last year "just work right" without any tweaking. The ONLY thing Bambu has (had) that other companies didnt was the AMS system and now come June/July there will be a ton of those from different companies and all those new ones are improvements on Bambu's AMS...You might want to dump your Bambu's now while you still can because they are being Antiquated in a few months time....I already dumped mine
I have never used a bambu, but if that is your experience and you've had good times then for sure I wouldn't move over. That's a bummer about Creality. I've gotten lucky maybe, but only had two of their machines, and not expensive ones.
@@anthonylong5870 Are you talking about the new Prusa? Not reviewed well and have used one. Not ready for prime time. Creality has non existent suppot. Any issue I have ever had with Bambu has been remedied quickly and at no cost to me. 4 Bambu printers working flawlessly. I have had Creality, Prusa, Anycubic, Elegoo, and Bambu. 15 printers in all. Nothing even comes close to speed, quality and reliability of my Bambu. My first Ender 3 was a great printer and is still in use. My Anycubic Predator Delta is still in use but requires a good deal of work. All the rest I dumped due to wasted filament and time. I can only speak to my own experience but I'm sticking will Bambu till something better comes along. Would like to build my own Voron. That would be fun.
@@OverExtrudedPhysicist Unfortunately for me I jumped in on some of Creality's untested printers. Specifically, the CR-10 S pro and the CR10 smart and the CR-6 smart. I still use my original Ender 3 and it can be a workhorse for the right job. For critical prints I leave it to Bambu