- Видео 40
- Просмотров 95 653
grox
Добавлен 13 сен 2021
FPV, 3D Printing, And Tutorials
⚡Make Your Own BT2.0 Power Connectors!⚡
Short Tutorial How to Make Custom BT2.0 Tinywhoop Power Wires.
This will let you save weight wich is so important especially on small quadocopters if you want to push them fast!
You can use from 20 to 26AWG Silicon wire gauge dependent on how much constant current your build draws. In order to switch between lightweight or more conductivity!
Enjoy!
This will let you save weight wich is so important especially on small quadocopters if you want to push them fast!
You can use from 20 to 26AWG Silicon wire gauge dependent on how much constant current your build draws. In order to switch between lightweight or more conductivity!
Enjoy!
Просмотров: 312
Видео
New Beast Tinywhoop on 5IN1 Betafpv AIO (And New Lava 260mah Test)
Просмотров 2,4 тыс.28 дней назад
Heloo Pilots! New 5in1 AIO Board from Betafpv is Here, so we will test it on this vid, enjoy! Build Parts: Main FC: Betafpv AIO 5IN1 ELRS Motors: se0702 28K Happymodel FPV Camera: Betafpv C03 Frame: Meteor 65 Air Propellers: HQPROP Ultralight Tinywhoop Propellers
Couple of my Best Laps on this AMAZING TRACK!
Просмотров 2365 месяцев назад
At the beginning I was struggling where to fly, because time was very limited. But when it happened this track was AMAZING! :) Thanks to Whoop of Poland !
Whoop Of Poland SkyCamp Poznań
Просмотров 3956 месяцев назад
Amazing event with Amazing pepole, took 1st place in OPEN class. Congrats to other pilots!! :)
🏁Fast Racing Tinywhoop🏁FULL BUILD TUTORIAL🔥
Просмотров 13 тыс.6 месяцев назад
Hello Pilots! (READ DESCRIPTION) In this next tutorial video I will show you how to build tinywhoop racer. SPEC: AIO: BETAFPV F4 Cross VTX: OVX300 MOTORS: SE0702 28K CAMERA: BETAFPV C03 BUILD WEIGHT 18.9G With Whip antenna, 17.9G Without POWER: BT2.0 SYSTEM WITH TATTU 300MAH Leave a SUB for more tutorials!! :) 00:00:00 Intro 00:00:25 Parts 00:05:27 Tools 00:08:00 Solder VTX Wires 00:11:43 Repla...
| ℙ𝕌𝕊ℍ 𝔻𝔸 𝕎ℍ𝕆𝕆ℙ | Tinywhoop Race Practice 🏁
Просмотров 18610 месяцев назад
Fly Crash Repeat :) #fpv #tinywhoopfpv #tinywhoop
2nd 🥈Whoop of Poland Warsaw vol.5 Montage HEAD TO HEAD FINALS!!!
Просмотров 144Год назад
My second race was in Warsaw, luckily got to finals, and finished 2nd. place right after first pilot, head 2 head race no crashing allowed. It was amazing! At first and second lap in my DVR Is a nice chase cam. Enjoy! NCS Tune: Andromedik & Used - Take Me [NCS Release]
![DIY Extra Battery to Double The Range For Your E-Scooter [And save $$]](/img/1.gif)
DIY Extra Battery to Double The Range For Your E-Scooter [And save $$]
Просмотров 216Год назад
Heloo, in this video I will show you how to build unexpensive LI-ION pack for you electric vehicle as extra one, to improve range, or replacement when your main battery is damaged or have very little capacity. This 10S3P Pack is for 36Volt system witch is used in My Kugoo S3 Pro. Manufacturer is Claiming 3500mah and Real capacity is Between 3100-3200mah wich is still pretty good for that price....
TinyWhoop Racing Wrocław vol. 12 First Time on Real Race and First Place!🏆 FINAL HEAT DVR
Просмотров 224Год назад
Very awesome event that I took part of. I ended up on the first place! I was curious how I can perform on real race, and had nice opportunity to try it out. Event and pepole were amazing here! I was racing in OPEN class because it was my first experience, so I learned a lot of new stuff here. Also nice durability test for my tinywhoops and luckily flew all races on 1 tinywhoop that took beating...
Fast 2S Tinywhoop Quick build Tutorial
Просмотров 1 тыс.Год назад
This is quick tutorial hot to build this 2S Whoop that I made last video of Enjoy!
100$ TinyWhoop THAT RIPS! Mobula7 Killer?
Просмотров 31 тыс.Год назад
Subscribe for more custom builds! ;) Thanks for @szymuraj98 for being a cameraman :) BUILD TUTORIAL: ruclips.net/video/nezJxXCi34g/видео.html PARTS LIST: Frame (Beta 75 Pro 2) betafpv.com/products/beta75-pro-2-frame?variant=31267487154310 Motors (0802 14 000 kv Betafpv) betafpv.com/products/0802-brushless-motors-4pcs?variant=31462101909638 AIO (Betafpv 2022 12A Aio) betafpv.com/products/f4-1s-1...
VIFLY Whoopstor 3 THE BEST AND LATEST 1S CHARGER [Unboxing & Review]
Просмотров 425Год назад
Heloo pilots! In this Unboxing and review video, brand new Vifly Whoopstor 3 lands on the bench, enjoy! ;) #tinywhoop #fpv #chargers Gear Transmitter: Radiomaster TX16S with BetaFPV Black 1W ELRS module set.250mw 250hz Standard antenna close range, Happymodel Moxon for longer range flights(directional) Fpv goggles: Skyzone 02X with foxeer lollipop 3 omni and realacc triple feed patch directiona...
5 Steps For More Durable FPV Quad [Tips and Tricks]
Просмотров 434Год назад
Heloo! In this video I will show you some ways that you can improve durability of your quad with small and cheap modifications.
FPV Drones On Next Level With 200$ 3D Printer!
Просмотров 2,2 тыс.Год назад
FPV Drones On Next Level With 200$ 3D Printer!
Cheapest GOOD Electric Scooter Ever? Unboxing And After100KM Review
Просмотров 366Год назад
Cheapest GOOD Electric Scooter Ever? Unboxing And After100KM Review
Jumper T-Pro Issue -- This video may save you trouble
Просмотров 1,7 тыс.Год назад
Jumper T-Pro Issue This video may save you trouble
Basic Betaflight Setup After Building Your Quad.
Просмотров 703Год назад
Basic Betaflight Setup After Building Your Quad.
Build a Beast 6S Freestyle FPV Drone for 220$! 2023 Tutorial
Просмотров 25 тыс.Год назад
Build a Beast 6S Freestyle FPV Drone for 220$! 2023 Tutorial
ExpressLrs Double 2KM Range Test with Different T-Antenna Placements
Просмотров 1,2 тыс.2 года назад
ExpressLrs Double 2KM Range Test with Different T-Antenna Placements
Clean Pack At The Bando First Trippy Spin
Просмотров 1,2 тыс.2 года назад
Clean Pack At The Bando First Trippy Spin
Wrocław Racing Center🏁 Upalam Karta🔥 i Wyprzedzam Każdego przy Eurobeat🚀
Просмотров 3,2 тыс.2 года назад
Wrocław Racing Center🏁 Upalam Karta🔥 i Wyprzedzam Każdego przy Eurobeat🚀
Hello, where did you get the prints for the gate connections or did you design them yourself?
Nice work fo the community!💛
Thanks Whoop Friend! 😊
Awesome!!! Thank you!!!
I bought 2 Mobula 7s when they first came out. I don't recall getting 8 minutes of flight time. Definitely little screamers though! Nice flying!
Please do a tutorial on how to make the light power connector. Thanks!
Thanks for sharing! Have you done a video on how to make the lighter power connection? If not, please do.
ruclips.net/video/vPT0xXvfdgo/видео.html
@@grox3857 Thank you Sir!!!
To its Wicked Faaast!!!! And the TIME!! 🤯!! So, Can we get a “OUTSIDE” view of how the quad looks like flying indoors/outdoors to get a Feel for speed ? I see FPV is hard to see so fast! But, maybe next video? So GOOD! #dronefpv
@@BeachbumfromBrick Haha Thanks a lot! Just Keep flying. I have some footage from gopro of this build zipping in my house, maybe I will upload some on next videos. :)
I like video good job .. Suggestions on cap size?
How do I buy a add on for 2s OR Two 1s batteries? I can’t seem to fit my batteries without “Rigging” w/rubber bands.. sucks. They fly off and just no good, any suggestions? I’m thinking if Quad blades too.. 🤔
Of course rubber band is not good solution, this whoop have 2s (for two 1s lipo) BT2.0 Adapter, and baterry case fits perfect and tight for 2x450mah or 2x300mah wich was used on the video with sponge spacers.
What is it the vtx problem?
Too low emit power, is set to 200mw but real is like 2mw
Sztos! <3
Please description fix what is Pitch and size of the props ?
I think I have found the problem with my 5-1 bad reception. I noticed the amperage in the OSD right before takeoff was at 1.8 amps on the air 75 with the 5-1 but on my air 65 and the mobula 65 the amperage was only .2 amps. So just as a test, I turned the IPX connector a tiny bit on the air 75 with 5-1 board and all of a sudden the amperage went back down to .2 amp instead of 1.8 amps. So after it went back down to the .2 amps I flew the 75 and now everything is fine but if I barely move the IPX connector the other way it goes back to 1.8 amps then the reception is very bad again. There’s something going on with the IPX connector on the new 5-1 AIO so at this point I’ve locked it down in the good position with some liquid electrical tape and everything seems to be fine at this point. It’s so bizarre that I found this using the amp data in the OSD. I still don’t have any clue why the amperage runs up high in a certain position must be some type of a short or something.
Thanks for info, I will try it. Yup there is some kind of partial short circuit that eats amps and heats up board very fast
@@grox3857 So far so good. Fingers crossed it stays fixed.
Great VID, a little tip from me, I spent a lot of time to set everything right, I had builds where I put my VTX antenta like you under the battery, It came out to be the worst spot ever regarding to Video quality, i reccomend puting the antena somewhere outside - Bless you - Keep grinding :)
@@adiQfpv Thanks for tip, already tested it, I can hide Antenna on my cross F4+Reaper Nano VTX and no issues, even when using just a enameled wire glued to the bottom of the vtx near lipo. BetaFpv Approved my case. So we will see how it goes to the next one :) You can see from dvr also there was overheating issue due to vtx problem.
I wonder if you didn't get a busted VTX. I've built 4 copies on this AIO. 16.85g. None of them have VTX problems. I use a trimmed antenna for the VTX. I've flown 3 specific trainings with one design. To check durability. About 30 batteries on each. No problems so far.
Thanks for info! :) Beta Approved guarantee and I will make part2 About this 5In1
Great video - vtx signal looks like crap - especialy 200 mv output. I know they upgraded vtx to 1.1 v maybe it will solve the problem.
@@ParrotsCantFly-j5o For 4in1 Air they already did update, we will see about 5in1 when they ship replacement
Nice testing my whoop friend! Thank you for the video!
Thanks Whoop Friend! :)
Love it! Great flying as well. Can't wait to see the build vid. I'm subb'n ya bro!
Thankss! This build vid is on my channel :)
Acro mode?
Yup, Acro and same rates as from very beginning like 4 years ago on simulator and fsi6
Nice 🙂👍🏻
@@NOT_NOW777 Thanks! Next vid with fresh tinywhoop build will be soon!!
Did u solder different wires to the camera than the stock ones? My camera came with very thin wires and yours are thick.
Yes, C03 comes with very fragile and stiff wires, I always swap them to elastic and durable 32AWG Silicon Wire with T7000 On top of solder pads
@@grox3857 Thanks! I've got 2 more questions. Do you prefer acro or angle for tinywhoop racing? Could you pls make a video on how to set up and tune this drone in betaflight?
i love this man
Betaflight configurator settings?
What battery did you use?
@@michaelblake3320 Tattu 300 mah bt2
wpadłem jeszcze raz bo "kiedyś" gdzieś widziałem podstawkę do lutowania XD. Jest gdzieś ogólnodostępny stl? 00:24:12
"My skill is not very good" Bro... they are excellent
GREAT BUILD❤❤❤
Thanks! :)
Awesome video! Sorry, my question is, can I mount a flysky fs-ia6B to tthis drone, even if it will fly bad?
Get the smallest reciever possible and it could be possible
What should I do to be able to use it with a flysky fs-i6 controller?
Hi. This Launch control stand from beginning is your design or it could be find on the internet?
Own Model and 3D Printed
@@grox3857 there is a chance for sharing stl file or it is not possible?
What's the purpose of the pigtail? Sorry I'm new to the hobby.
It looks like you're using two batteries. What advantage does this confer over a single battery? what batteries are you using? thanks a ton <3
Pigtail is designed to take two 1s lipos as one 2s lipo->series connection. 2S have 2 times higher voltage so more power and less amps at same wattage->more efficient.
@@grox3857this flight controller says it’s for 1s though? It can run 2s?
@@nicksantitoro Yes this version have stronger ESC's
whats your googles aand setup on them? Im trying to get back to hobby with only tinywhoops and I am wondering which google should I buy to have decent video
So cool! What do you think about doing 35mm props with 15000kv motors for even less weight and a smaller quad.
Yesterday I almost lost my drone because the Jumper's batteries got loose, the controller lost power and dropped the RC link. It was just that metal tab you showed how to bend back. Lesson learned - before you fly, shake your controller to make sure it doesn't power off because of loose batteries.
I wish you to see this video before that happened. You can subscribe to not miss out on useful tips and tutorials :)
Brother, you're one helluva ripper - Definitely deserve WAY more subs. Stay up bro ✌️
Thanks!! :)
that voltage drop is pretty impressive, very steady and slow.
Yup, more tho with OLD lipos, current when hovering is only around 2A
Would you have the stl file for the case
Why only 2 screws mounting the motors?
In my tests with this tempo of flying no problems with durability, less weight.
Super setup, nice flying. Do you mind sharing your tunes and how do you set the launching mode 5:01 , thanks
Nice build. And strong pilot skills, that`s nice!
Thanks!! :)
for a beginner, what kind of drones you recommend for a start? Should i buy cheap E010 or anything else ?
Before you spend a penny, get a simulator. Fly in a sim until it becomes a second language for you. Then go rip a real kwad. In the long run, it'll save you tons of time, frustration, and money.
@@MrGaussFPV Thank you sir! I will take your advise.
betaflight config video ?
Also btw how do you make drone push up back side for a faster start?
Couldn't find those 14k KV motors. Also what did you put in battery holder to make it right size?
Unfortunately yes, need to buy newer ice 0802 motors with similar kv
For baterry holder that is originally too big just sticked two pieces of foam and it does its job well.
Hi. Find out today big problem. Hope you can help me solve it. Went to fly my Meteor65pro, but it didn't work. When plugged in battery the motors do the beep sound, but nothing else. ELRS receiver is not working, neither VTX. Betaflight or PC doesn't see the drone when pugged(can se other drones, cable/betaflight/drivers are fine). Not sure if it does anything to do with it, on my last fright it says heat alert 74*C, but I landed immediately. What could it be and what can I do to help it. Thanks.
Wow, you are so pro... its hard to see what is going on there, but you do fly it omg. Would like to ask you an hardware question: I burned out FC on Firefly1.6 1s toothpick. But the boards are sold out around 6months already(AIO 5A board w/ built in VTX). What could I change it with - suggest pls.
I'm not a pro but thanks! Firefly have normal 5A esc aio, you can even replace it with Betafpv Cross, but then need to set it up and it will fly with no problem.
@@grox3857 What do you mean by "normal" esc that firefly has? They used to sell same AIO board like my, but its out stock. By Cross Betafpv you mean to mix Betafpv board with the rest parts of my whoop? Flywoo AIO is w/ VTX onboard and separate Elrs, but BetaFpv AIO got Elrs built in and separate VTX. Will it still works if I get BetaFpv Vtx and AIO board w/ Elrs ?
@@Braincho "normal" that it have generic 5A esc"s used same on all whoops. You can go with BetafpvCross, and ovx300 this is best, most reliable, and lightest setup with separate vtx nowadays. Exactly what I'm flying right now
@@grox3857 I see, thanks a lot. Was wondering is this BetaFPV AIO board is reliable, cuz just had a problem with my Meteor65pro, but if you say its good - will get one. Also a question about VTX; does BetaFPV M03 VTX bad compared to ovx300, cuz if I purchase AIO board from them would be nice to get in the same order VTX too.
how do you lean forward like that?
When doing tuning/setup in beta flight, you can select "Launch Control," and select a switch for it. (More or less.)
@grox I am new to fpv drones, I bought a TinyHawk 2, I dare not fly it, did you use simulation or went straight into flying, what is you're opinion, should I do simulation before flying in the open empty field ?
I had at least 50H in simulator
@@grox3857 Can you let me know which controls you use, left stick up/down left/right, and right stick up/down left/right cheers.
@@monkeytrident Standard Mode2 wich is Throttle and Yaw for left stick, Pitch and Roll for right stick
@@grox3857 What do you think if I buy a cheap brushed micro/mini/nano drove for like £20 and fly that in a open field rather then simulator perhaps this would work, what do you think ?
@@monkeytridentOf course. Even my first ever drone more like a toy. For 10$ (furibee f36) Had a great time with it, learned throttle control and LOS orientation.
What is the size of the squares you fly through?
Regular square 45cm width and height but gates at the race events vary, usually from 30 to 50cm it depends.
So awesome, it is a rocket 🚀 i have a mobula 7 v2, it has GEPRC SPEEDX2 0802 16000kv motors, do you think these could be good for same satup you have? I have the estock fc too, by the way could you please share prop specs, like what pitch those are, i need 40mm prop but not sure what to buy so would like to test the same you used on this build
Props are gemfan 40mm they are very good on 2S High RPM with low pitch. Your motors are also pretty ok, so you can check if your FC supports 2S just change pigtail and send it!
@grox3857 excellent, thank you so much, for the moment I have been just using 2s, I will buy the gemfan 1610 biblades to test them, do you think will be ok?
@@TheFpc20 Yess, they spin MUCH faster on low pitched biblades, this is also the reason why I choose them over triblade, mentioned on the video also.
@@grox3857 thanks!