- Видео 21
- Просмотров 49 943
cr.zpirit
США
Добавлен 25 авг 2023
2011 Honda CR-Z Restoration Build - Full show car build from the ground up, with helpful information and mods along the way!
2011 Honda CR-Z K20Z3 Swap Part 2: Pulling the Drivetrain
Part 2 of the K Series Swap Series (gotta be a better name for that) is already here! In this video we are pulling out the old engine and transmission through the top of the engine bay, as well as removing the exhaust piping and IMA battery and cables. I've gone into a lot of detail here on the steps needed to remove everything, but if I missed anything or you have additional questions please leave a comment! Stay tuned for Part 3 where I start touching up the new K20 and prepping it to drop in.
ZF1 Service Manual (IMA battery removal instructions start on page 859): drive.google.com/file/d/1MKqwHHYyIn0xrsbjEca8cvFsYiDFRSYn/view?usp=drive_link
IMA Battery Fan replacement video (for better l...
ZF1 Service Manual (IMA battery removal instructions start on page 859): drive.google.com/file/d/1MKqwHHYyIn0xrsbjEca8cvFsYiDFRSYn/view?usp=drive_link
IMA Battery Fan replacement video (for better l...
Просмотров: 345
Видео
How To Remove/Replace Center Console & Shifter Assembly in a Honda CR-Z (6-speed MT)
Просмотров 31912 часов назад
Today we are going to take a look at how to disassemble and remove the center console, as well as replacing the OEM shifter assembly, base bushings, or shifter cables in a Honda CR-Z. Find more useful information at the links below! (These guides are hosted by their respective owners, if the links are dead there isn't anything I can do about it) Acuity Instruments shifter base bushing install g...
2011 Honda CR-Z K20Z3 Swap Part 1: Prepping for Engine Removal
Просмотров 58814 дней назад
Starting off the K Series Swap Series (gotta be a better name for that) with a long one. In this video we are disconnecting and removing essentially everything necessary to pull the old drivetrain out through the top of the engine bay. I've gone into a lot of detail here on everything that needs to be disconnected, but if I missed anything or you have additional questions please leave a comment...
Project CR-Zpirit: Barn K Swap Intro
Просмотров 8203 месяца назад
It's finally time - as a part of the total restoration of this CR-Z we are giving it the drivetrain it was meant to have: a Civic Si K series. Follow along as we go through the entire process start to finish of making this swap a reality!
How To Replace Front Struts on a Honda CR-Z
Просмотров 1,3 тыс.3 месяца назад
In this video that was definitely edited and published shortly after I filmed it, we are replacing the front struts of our CR-Z with Tein Street Basis Z coilovers. This is a basic guide on how to remove and replace the front suspension parts (strut and spring) - make sure to always follow the included directions if you purchase aftermarket parts since the hardware, installation tools, and steps...
Replacing Rear Shocks and Springs on a Honda CR-Z
Просмотров 9834 месяца назад
In this video that was definitely edited and published shortly after I filmed it, we are replacing the rear shocks and springs of our CR-Z with Tein Street Basis Z coilovers. This is a basic guide on how to remove and replace the rear suspension parts - make sure to always follow the included directions if you purchase aftermarket parts as the hardware, installation tools, and steps may vary! I...
K-Swap Prep: Picking Up a New Heart for the CR-Z!
Просмотров 6884 месяца назад
One of the main reasons I bought a CR-Z was because it looked sporty and fast - now the real work begins to build a car that lives up to those expectations! We picked up a K20Z3 engine and transmission from an 09 Civic Si at a relatively local salvage yard. With a few repairs and upgrades, it will be ready to power the CR-Z! We still have lots more parts to collect and fabricate for the swap, b...
Honda CR-Z Noblesse Wing Restoration and Installation!
Просмотров 1,5 тыс.5 месяцев назад
One of the big aesthetic body mods finally arrives today - the genuine Noblesse carbon fiber rear spoiler! I have always loved this particular style, and when I saw this particular wing on a Japanese auction site at an incredibly low price I had to snatch it up. Obviously, a part like this with a low price tag comes with a few flaws, but in this video I'm going to show you the various issues th...
How to Remove or Replace Rear Bumper and Diffuser on a Honda CR-Z
Просмотров 1,1 тыс.6 месяцев назад
In this video we are going to take a quick look at the removal process for the rear bumper cover of a 2011 Honda CR-Z. This is a fairly quick and simple removal, and I've also made a couple notes regarding the rear license plate lights, lower bumper reflectors, and removing the diffuser from the bumper cover itself
Project CR-Zpirit - 1 Of 1 Custom Taillight Install
Просмотров 1,6 тыс.6 месяцев назад
One of the first real show-stopping modifications is finally on the car - the custom taillights built from the ground up in collaboration with Foxbeam Lighting! These taillights are sick - built using OEM lens and housing cores, the entire inside has been gutted and replaced with 3D printed internals and laser cut and machined acrylic optics for a super unique appearance! Some of the finer deta...
Project CR-Zpirit - Front End Rework Begins
Просмотров 1,5 тыс.Год назад
It's Christmas time, and the CR-Z isn't left out when it comes to getting gifts. FedEx just dropped off a huge box full of Japanese body parts and we can't wait to replace the damaged OEM panels with what's inside!
Project CR-Zpirit - Winter 2023 Update & Plans
Просмотров 466Год назад
Time to put the CR-Z under a roof for the winter. I have lots of big plans, but this winter while we are inside I hope to dive into the suspension and body problems infesting this project car, and more!
Replacing the Oval Fog Light Assemblies on a 2011-2012 Honda CR-Z
Просмотров 2,1 тыс.Год назад
Today we are going to check out the process of removing and replacing the fog light assemblies on a 2011-2012 CR-Z. The bumper does need to be removed to access the bracket, but once you're there it's smooth sailing! Video on front bumper removal: COMING SOON! OEM Fog Light Parts #s (uses an H11 halogen bulb): 33901-SZT-A01, 33951-SZT-A01 Foxbeam Diode Dynamics SSC2 LED kit: www.foxbeamlighting...
How to Remove Taillights and Replace Bulbs on a Honda CR-Z
Просмотров 4,6 тыс.Год назад
Got a burned out brake light or turn signal in your CR-Z taillights? In this short video we are going over how to remove the taillight assemblies and replace each bulb from the back. Parking Lights/Brake Lights: Proprietary LED Turn Signals: 7440 Halogen Reverse Lights: 921 Corner/Marker Lights: T10 (168)
How to Remove, Replace, or Delete the Rear Wiper of a Honda CR-Z
Просмотров 2,3 тыс.Год назад
How to Remove, Replace, or Delete the Rear Wiper of a Honda CR-Z
Accessing and Replacing ALL Interior Lights on a Honda CR-Z
Просмотров 5 тыс.Год назад
Accessing and Replacing ALL Interior Lights on a Honda CR-Z
Installing Gas Hood Struts on a Honda CR-Z
Просмотров 2 тыс.Год назад
Installing Gas Hood Struts on a Honda CR-Z
Accessing and Replacing Honda CR-Z Hybrid Battery Fan
Просмотров 12 тыс.Год назад
Accessing and Replacing Honda CR-Z Hybrid Battery Fan
JDM Full LED 'Final Label' Headlight Installation on Honda CR-Z Made Easy!
Просмотров 10 тыс.Год назад
JDM Full LED 'Final Label' Headlight Installation on Honda CR-Z Made Easy!
Hi, could you give me the length of the axes thank you
These videos are awesome as not many people are making them for these cars! Current owner of a ‘11 CRZ as well that I’m about to do a front end rebuild on (suspension, control arms, steering rack and pinion). If you have any tips or advice on the steering components it would be greatly appreciated!
I'm assuming the CRZ shifter will work with the Z3 trans? Same direction actuation of the cables?
Are you using the Hybrid Racing shifter made for the CRZ or a different model?
The shifter is HR's CR-Z specific model, however the cables do have to be different from CR-Z cables since the lengths and distance from bushing to bracket are different. A custom transmission bracket may be required... Will dive into that in part 4 or 5.
Sweet intro and outro!
Good
Thank you for that video!
Would have loved this video before I tried doing this myself, but glad it's here for everyone else!
That was fantastic! Thanks!
Have been following your videos on the CR-Z from the start and find them so interesting and informative, Im amazed at your knowledge and attention to detail. I have here in the UK a 2014/15 CR-Z S Sport on 48k and I intend to keep it as close to original as possible apart from maybe upgrading the headlights and head unit to an up to date satnav with CarPlay. What I find most interesting is you showing me the guts of this car. Can't wait to see the next instalment.
Good job bro...waiting for your next video..this will help alot for kswap 👏👏
Lmao, I thought my Euro spec CRZ GT '11 had no glovebox light. Turns out it's burned out. Helpful video with the list of all the bulbs needed and I'll definitely do the trunk light mod. My version doesn't seem to have rear seat lights, has belts instead.
Watching, with much interest. Thanks for showing us the way!
Would swapping a RHD(JDM) unit and LHD be the same ?
@@iambillyngu there are some differences since the steering column is in a different place - exhaust and brake lines need to be rerouted mainly. I'll put some more info in the start of the next video 👍
Did you check out @A.QPerformance? Bro knows the swap better than anyone on the forum in my opinion
oof
Love the amount of detail you go into, you're a legend!
Excellent content keep it up!
damn bro im so excited u dropped this gem couldnt wait
When i tell you ive been patiently waiting for this update.. THANK YOU basing my personal swap off these
Awesome! Hopefully this guided series makes it super easy for you to follow along. I'm excited to post more progress soon. And keep in mind (at least in the later videos) that there is a lot of flexibility with swap parts - brand, new vs. used, OEM vs aftermarket, there's plenty of ways to configure a swap to your specific needs. As always if there is any info I leave out or you want more details on just ask!
Hey i really want to get to know car anatomy and i don't know where exactly to start
If you're talking about knowing what/where all the different parts are, it just takes personal experience! Essentially everything I have learned has been from hands on work or personal research in service guides and other YT videos over the last few years. Many things can be deduced by what they are connected to. In fact a lot of the hoses and such I mentioned in the video, I didn't know what I was removing right up until I started pulling them and seeing where they went. Many of the fluid systems (brake, clutch, coolant, etc.) have caps on the fill tanks so you can easily identify the specific system they go to. Start following the tubes and you'll end up at more components for those specific systems. Other than that, just take some time fixing or replacing minor maintenance parts and making mental maps of everything you've explored so far. It is important to remember that not every vehicle has the same parts in the same location/orientation/style, so it's better to understand the general way things connect and interact rather than trying to look for the same size or shape of part every time. I've been working on my own vehicles for over a decade now - experience comes with time, but don't get intimidated by how much there is to learn! Have fun with it :)
@@cr.zpirit salam brother and much appreciated!
I'm trying to replace the original subwoofer but I don't know how
hey man i would love a led rear reflector video cant figure out how to wire them up
Friend help me please, the IMA appeared on the dashboard and the car does not turn on, now I bought a new battery and it turned on, but it only served for a couple of hours and it no longer turns on, and we measured the alternator voltage and it is charging well, yes The 12v battery is new and the alternator charges well, and IMA appears on the dashboard, is it the same reason? The electric battery fan? 🙏🙏
The 12V battery in the engine bay and the hybrid (IMA) battery are two different systems, if you have an IMA issue replacing the 12V battery in front will probably not change anything. You need to get a code reader to see the specific IMA fault code you have, it will describe in more detail what the problems are. The CR-Z does not have a traditional alternator, only the IMA motor on the engine to recharge the battery system.
What's the part number for the Subaru cargo light housing?
It's in the video description.
@Danteska90 thanks, I missed it!
Neat. I have been wanting to get back into Hondas and this same project car and swap has drawn me in. Looking forward to following along.
How do you change the side mirror lights 😭
Should do the 51 r battery mod works great
Hey there! I have my CRZ and I would like to get a new engine like yours.
Where did you get those headlights ?
My hybrid fan turns on loud at random times, even after turning the car off for a bit. Recently it happened and finally gave CEL P1448. I cleared the code and it hasn't happened again yet. Does this sound like it just needs the fan replacement?
Yes, sounds like the fan could definitely be on its way out and use a replacement. Check the ducts and filters and make sure there isn't debris or blockage as well.
On the same boat as you with mine. If you could share the link for harness that’d be awesome!
We got the harness for this specific engine from 2nrs.
are u going turbo with the build!?
Where could I buy them ?
Can do you a video on the led reflector installation?
Yes Stay tuned Video.of this topic will be upload next week on my channel
Good luck!! I really want to see this as I plan to kswap mine sometime in the future!
Funny enough, I was just looking for a video on how to replace the struts for crz. Thanks for the video. Also probably going to have to do the control arm and tie rod ends because the bushings are going bad.
Alright man I GOTTA know how you hooked up the rainbow lighting to your cluster. I've got one torn apart on my desk right now trying to follow the RGB traces for the 3 modes color display so I can tap into it for other interior lights (with some sort of middleman circuit so I don't fry the board) I don't see a video about that on your channel, I assume you used some circuitry you have for the headlights / tail lights and wired it up to the cluster? Looks amazing man.
I want to know how to get rgb setup on the cluster.
❤
Brooooo let’s goooooo!!!
Awesome, looking forward to seeing this.
👍
nice looking forward to watching this series :))
Good stuff! Cant wait to see some actual substantive content on the CR-Z for once 👍
Very excited to watch this! Looking forward to seeing updates 🙏
Damn i'm actually first for a change. Here i go! I have 2 cr-zs (6spd, cvt) i am wanting to put a k20c1 into it, however i was told it would be easier to get a k20z4 or k20a, regardless i am very invested in this series! Thank you for your commitment to the CR-Z community. Also i shared your videos on there i hope you don't mind :)
Swap certainly depends on what engines are easily or cheaply available near you, power goals, etc. For this winter we are going with a pretty much stock K20Z3 from the 8th gen Si. This is one of the simpler routes in terms of swap parts and wiring as far as I am aware. But next winter we may build it out for more power or do a frankenswap with a K24.
@@cr.zpirit Amazing! Thank you for your reply, i will be keeping my eye on this project quite closely!
Hello "cr.zpirit" I saw that in your channel have some problems. For these problems your channel is not much growing. Not getting much engagement. If you can solve these problems, Your channel will get more engagement. If you can give me permission I can tell to you about these problems. Can I tell here or email? Okay?
Cool headlights 👍, could you please share where did you buy them?
earned a sub. I'm collecting parts to do a coil install as well as replacing the worn ball joints / control arms. looking forward to that vid soon
Do keep in mind, on the CR-Z the outer ball joint is inseparable from the control arm. The whole unit needs to be replaced as one part unfortunately. Hoping to have this video up soon!
bro you're a legend, this on my to do list and with your video now i am going to bump up its urgency . i got this crunch or weird vibration now and then on corners and the steering rack appears 100% so this was my next bet!
@@KeebaAfrica definitely check over all the hardware as you go and make sure it's properly tightened, and as I mentioned check your axle boots and ball joints on the control arm for any damage as well. When those get damaged and lose their grease they can also cause noise and instability issues.
Is it really necessary to remove the cover to replace it?
@@ygggu6767ef I would strongly recommend it. I did a coilover install on my Fit a couple years ago without doing that, and couldn't fit a key in the center to hold the shock. I spent a long time trying to torque down the top end and ended up rounding off several nuts in the process. It doesn't take much extra time at all. Just some plastic clips and the wiper bolts. For the little effort it makes accessing the top hardware so much easier.