- Видео 9
- Просмотров 102 100
WU Speed Kayak
США
Добавлен 25 сен 2022
9.8 TOHATSU On Kayak
Watch This Large Motor Fly The Little Kayak!
Tohatsu 9.8 HP motor flies this little kayak to 18 MPH (28.97 km/h). Warning! This Jonny Bass 100 meant for 2.5 HP outboard motor only.
Просмотров: 1 876
Видео
Watch This Oversized Tohatsu 9.8 HP Setup With Jonny Bass 100
Просмотров 80 тыс.Месяц назад
It’s crazy to see this large outboard motor on a little kayak. It’s dangerous and can flip any moment during high speed. Do not try this at home!
Jonny Bass 100 Three Years Review With Transom Modification
Просмотров 3,3 тыс.Месяц назад
Must watch WU SPEED KAYAK, before you decide to buy your new kayak and outboard motor.
Fixing Jonny Bass 100 Problems!
Просмотров 7516 месяцев назад
This is what you need to know before you buy the Jonny Bass 100
Jonny Bass 100 + Suzuki 2.5 HP Problems. Should You Buy It..?
Просмотров 4,2 тыс.8 месяцев назад
Suzuki 2.5HP Reviewed With Jonny Bass 100 all good and Bad performances
Is This A Kayak Or A Boat?
Просмотров 481Год назад
This little kayak with 9.8HP, it takes me everywhere, like a boat!
See What Happens, Top Speed with A Big Hole On The Bottom!
Просмотров 1,6 тыс.Год назад
If you are going to buy Jonny Bass100 or you owned one, watch this video. You will see how much this little Kayak can do.
it’s Only 10ft Long Kayak But It’s Real Fast Like A Boat.
Просмотров 2,9 тыс.Год назад
DIY 10ft Kayak high speed test with the outboard oversized for its kind. Watch this to see how it’s done.
9.8 HP Outboard Motor On 10 Ft Kayak!
Просмотров 8 тыс.Год назад
For The First Time, Jonny Boat Bass 100, has paired with the Tohatsu 9.8HP Outboard. This large outboard has taken this little kayak to the next level, which has not been seen before and it’s dangerously real fast..!
Песня вощеее супер . Ну и лодка нормально
❤q
hows the steering I am thinking getting one, also can you paddle it decent or is it a struggle ?
Опасно , если коснуться одним из поплавков на скорости , может быть беда.
Looks like a breeze ;)
Man your bananas are upside down!
That’s right, I'm using this way for different purposes. Thank you
Good job pu. Love the music also 😅
, I’m so excited to know, Khmer watches my videos. Thank You!
Motor is probably way under-propped for that. Could easily hit 30+ with a different prop.
Agreed! At least in the high 20s
Thanks
This motor is way over power this kayak. This Kayak only can handle up to 20 mph but it very dangerous and can flip at any moment. Thanks
How does it behave turning at that speed? My experience with natow boats and hard chines , is that they burry their outside chine and want to go over as soon as you initiate a tighter turn.
At 18 MPH for this little kayak, it feels like you drive a car, at 100 mph. it can maneuver around 45 degrees or less any turn more than that I need to slow down to 16 mph. Thanks
Приятно посмотреть, подъехал, разгрузился, собрал что надо и по ровной дорожке спустил лодку, а у нас и к берегу не подпустят, а если подпустят то потащишь лодку по камням на себе, хорошая лодка, все на месте
Thank you
Um barco desse é um sonho
thanks
Thanks
ruclips.net/video/89CfnYCZMM4/видео.htmlsi=pIIF1wV30WXQOxkT
This is awesome wu!
Thanks
Pretty sure you’re not supposed to lay outboards down on their side.
Thanks
💕かっこいいですね💁♀️💕いいね👍とch🔔済みです💁♀️💕ボート初心者夫婦マミーより💕
Thanks
👍👍 ruclips.net/video/VlRxQLVSzZs/видео.htmlsi=ODzb3GKTXpgQpiBf
Thats awesome! Great job man
Thanks
Nice bong Maybe I will get one to chase them striper
Примерно как я в детстве в луже на ванне плавал😂😂😂😂
Thanks
I'm from France and looking some tips about kayak. Watch your video and suprise to hear Khmer music. I'm Khmer angler from France ahah
Thank You, great to know that there’s Khmer like kayak in France.
You are absolutely crazy ahahahah, what a nice thing to see! Have a great day
Thank You
Bagaimana caranya saat sampai di tengah air, anda membalik pelampung yg warna biru itu?? 😮
Thank you
Put some wings ,I bet it may get airborne
Yes, it will fly next video 😀thanks
Good job! Look like a remarkable compact enhancement to put all in a such small space. What’s max speed? Be careful, it can be a kamikaze run when crossing over a big wave from a larger boat especially blue floaters put upside down, waved water can push one floater downward and flip the fast running kayak in seconds. I’ve a bad experience with my 17ft ski boat passing big waves at 40miles/h, it flew up between waves and landed very hard, my back pains last days. Perhaps you own the lake, no other boats are allowed.😅
Thanks
Thanks
17 foot cabin crusrr nit speed eemmn biat wace dint iund yiu desth
Thank you, this is my third season, the kayak has been modified many areas for different conditions of the lake. Thanks
Super
Thanks
Tohatsu makes great engines
Yes it’s great outboard motor
That looks like a lot of fun!!
Thank you
Your outside blue floats are upside down.
Yes, it for different purposes. Thanks
WU great video to start with. My question is I am building a similar setup. You have spent some time with tiller steering on your outboard engines. How do you like it ? Have come to be able to maneuver it as needed and is it comfortable . Will you keep doing it that way ? Thanks for showing your work.
Yes the longer tiller steering is better for my kayak. Thanks
Whats the blue things hanging off the side.
kayak stabilizer
thanks
I never thought about putting wheels on my kayak. That is a good idea and I will look into it, And I also have the exact same outriggers as you, I only have an electric motor though that’s basically all I need for a huge lake. You definitely need that motor, and I like how you turn the outriggers up so they don’t get blown off as you’re flying through the water and then you put them down. I imagine when you’re fishing or just going slow very good idea.😊
Thank you!
Where's the bar at? Im thirsty
I love your sensibility!
Thanks
very cool boat!!!!!
Thanks
Зачет
Thanks
Cool boat sir, can you make a tutorial for installing outriggers on a jonny boat?
Thanks
Awesome master
Thanks
Next time two of those maybe?! Pulling a skier.
Thanks
I could be wrong. But looks like he's got his kill switch lanyard wrapped around the throttle ?
Thanks
I would have to wonder. Is that boat transom rated for that kind of weight and forces. (More than likely not.) The boat looks to be Poly. Poly boats don't take constant weight in one spot very well. The forces bending back and forth on the transom will eventually break. Good example: Scupper holes in kayaks, then using Scupper hole carts to move them around. They usually always break out sooner or later. Sometimes even the kayaks that are designed for such carts. So, be aware!
It's rated for a 2.5hp gas and 3hp electric.
@@chrisparker9886 It's great fun to have lots of power. But I know even on an Aluminum or fiberglass boats. They all have their ratings also. Overweight & over force on any these construction materials do break the transoms out. This is all why they have ratings.
No it only rated for 2.5 HP outboard motor. But I mortified it with my own transom. Thanks
How fast you can go in km/h with 2.5hp? Is it on plane?
Between 11 to 12.5 km/h
What kayak is that?
Jonny Bass 100 ?
This is Jonny Bass 100
Yer crazy, I like it✌️
thanks
My god, and I complain about getting my 10ft aluminum on the truck. Good for you! If theres a way
Same for me and my coleman crawdad. I'm considering a utility trailer to haul it and launch it. haha
Thank you
Next time use 15HP, you will fly LOL. will upgrade mine to 5HP 2 Stroke.
Thanks
Thank you for making this video sir!
You are welcome, and thank you for watching my videos.
Your channel is inspiring! May I ask where you bought your stabilizers? And could you do a future video explaining your external fuel tank setup? Ive never owned an outboard before - thank you!
I bought my stabilizers online. But you don’t need stabilizer if you have 2.5 to 3 hp outboard motor. I used stabilizer because my 9.8 hp motor, not mean to use on such a small kayak. My little kayak has a lot of modifications on it in order to use with large and heavy outboard motor. I hope this will help you. Thank you for watching my video.
Great Video Pu!!!
Glad you enjoyed it
Hi. When you stick the pvc fabric to the Jonny Boat, do you put the glue onto the pvc and then stick it to the Jonny Boat? Or do you put the glue on the Jonny Boat and then put separate glue on the pvc fabric, and then stick the fabric to the Jonny boat. I have no idea about DIY but want to do the same thing to my Jonny Boat. I purchased the JB Weld and pvc fabric but I don’t want to mess it up so I just wanted to ask how you glue it on. Thank you
Hi thanks for asking. You need to spread the glue on both PVC fabric and on the boat. About 2” from the edge of fabric perimeter. And use blue tape on the boat so that it will not get messy on the outer perimeter. Generally press not too hard just like you do kitchen tile. Go back watch my video again it might helped you. Thank you.
It will take a couple of days before the glue getting very hard. After you stick the fabric to the boat and you like the way it look, you need to remove all the blue tape right the way. In the next 24 hours you will see some area you might need to add some more glue you should do so. I hope this might help you.
Oh, I forgot, make sure you attach your console to the boat first and flip it over so you can have the fabric lay on the top of it naturally. Don’t glue the console. Lo!
@@wuspeedkayak4614 thank you very much. I really appreciate your replies.
I like the idea of covering the console hole like that. So, you don’t glue the top or bottom of the console hole, so that water can flush through if it gets in? Also, is pvc fabric what you generally recommend as a fabric to cover the console hole, or should I purchase a different fabric? Thank you
PVC fabric is very tough and it is not easily rip or puncture and it is for using on or underwater, like inflatable boat. I used this for one season and it is prove to be very good for covering the console hole underneath of the Jonny Bass 100. I can’t think of any material that can use underwater. thank you for watching Videos.
@@wuspeedkayak4614 thank you for the reply. I’ve been looking into buying an industrial or fishing pvc apron, then cutting that to suit the console hole and then gluing it with the JB Weld. Your solution is simple yet effective (and I hope it is for me too). Thank you