- Видео 3
- Просмотров 11 154
1MEAN1
США
Добавлен 17 фев 2016
Harbor Freight Hydraulic Press Mods
There are some of the modifications I did to my Harbor Freight Press.
Просмотров: 6 167
Видео
Wiper Switch Replace 2006 Pontiac G6
Просмотров 3,6 тыс.4 года назад
This is how to extract and replace the wiper switch on a 2006 Pontiac G6. The steering wheel does NOT have to be taken off. 10 minute job tops! The cover on top simply pulls upward and there's 3 screws holding the bottom cover. Lower the steering column and pull it outward if yours allows this for better access. a small screwdriver is then pushed into the square holes located on the top and bot...
DeWalt DWX726 Miter Saw Stand - Adding pneumatic 10" wheels
Просмотров 1,4 тыс.6 лет назад
Description DeWalt DWX726 pneumatic wheel addition
I came up with a mod that I haven't seen anyone else do yet. I took a shot 20 ton bottle jack apart and removed the center cylinder with the manual screw shaft. I then cut off the crooked press shaft harbor freight had mounted, and welded the guts from the old shaft in its place. Now I can make fine adjustment to the length of the press shaft without having to fight the springs and screw shaft on the top of my pneumatic jack.
Would appreciate knowing where the winch came from.
Great ideas and execution. Thx for posting. Just got mine and I'm collecting ideas.
Appreciate the video I thought the screw had to be removed and to get to it I would have to take out the steering wheel. Appreciate the video. Thanks again saved me a lot of time
Sir: Nice press! Does your crank and boat gliders raise the plate/ base table evenly? Some (most) harbor freight presses have slop in the base table in relation to the frame. When you added your grade eight hardware, did you address the fit and did you do any other modifications to reduce the slop? My assumption is that slop and the design of the rigging for the winch system could induce uneven lifting of the base table (side or top mount lifting…dual cables, one each side…. Or single pulley vs double pulley solutions). v/r wh
It raises the table evenly because the winch is actually mounted to the table on one end and the cable goes to the other table end. I am not sure what you mean by "slope"?
Very Nice Job
thank you! 🙏🏻
Wow. Thank you. I have a G6 with 197000 miles on it, I bought brand new. Good car.
Very professional mods! I am interested in how you made the foot pedal.
www.amazon.com/gp/product/B07P41RSG7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 m.media-amazon.com/images/I/61rL9oiolXL._SX522_.jpg
Thank you
Nice👍👍
Sorry guys, the 8.5"x11" plates are solid steel!! Not cast.......
Thanks for the video!!
Thank you🙏🏽 I wonder if this works for a 2010
Appreciate the video!
You could just as easily buy 2x 1" sleeves for each wheel and then you wouldn't need to cut then at all. They didn't have any in stock while I did this upgrade.
Can you add a list of all parts necessary and where to buy them online to do this mod? That would be helpful!
Tractor Supply = Hillman Seamless Steel Spacers, 1/2 in. Inner Dia. x 5/8 in. Outer Dia. x 1-1/2 in. Length SKU # 328451499 $2.29 Also Sold at FleetFarm in the hardware drawers Harbor Freight = 10 in. Pneumatic Tire with White Hub $4.99 but go on sale regularly
It might be easier to just add 2x 1" spacers for each wheel rather than cutting 1 1/2" to save money....
will the stand vertically with those tires
Yes it does.