Видео

Nice overall review of all your mods. That's a sweet bike. I test rode a couple different K1600 during BMW Demo Days. I currently have an R1250 RS and love that torquey boxer engine. However, the smoothness of that K is amazing. It was like riding on a cloud. Enjoy and safe journeys to you.

The start up at the end of the video sounds sweet!

Ok thanks

Enjoyed the video ! Does your bike use oil between changes ? Thanks

Thank you for the info

Just bought one of these bikes and really like your taste in upgrades. Which phone holder is that you have?

Did you check out the k1600 GT version? If so why choose the bagger & why not the GT?

Very nice bike. Do you still own it and how has it treated you?

Dave, when you put on the bar riser extensions, did you have to modify anything else (cables, etc)? Thanks.

This is a very informative video, based on the information you’ve provided I am thinking of purchasing the ear buds by Tozo, the question I have is can you answer a phone call? I understand it is good for music etc but I wonder if it would pick up my voice while unswerving a call. Thank you

So, after riding with the Corbin Smuggler seat for three plus years, I can confidently say that it is the worst seat imaginable. I can't see how this would be much different for any other rider. I really like the way it looks, and having the extra storage, but instead of breaking in over the past three years, it has become un-rideable for any length of time. The padding has remained hard and the sides of the seat create hot spot on the thighs. So, I am in the process of having the seat reworked by a third party, and will post the results once I have it back. Some Corbin seats may be good - this is the only one I have experience with, but I would advise to stay away from this one.

Add a spring to the floorboards, between board and bracket so there is tension on it if flick it up by accident. a spring similar to what is on a kickstand. Really nice bike!!

Very well done 👍🏼

Kalau sudah masuk, jangan di hitung hitung lagi nanti loe sakit,,, Segede gede gitu sudah masuk kedalam mata loe,,, sebesar besar itu sudah masuk ke dalam mata, di sana ada dokternya kalau sudah masuk jangan di ungkit ungkit lagi nanti kalian sakit...... wo ai ni ni ai wo

🔥

Your bike is absolutely beautiful you did a great job on the notifications.

Corbin seats 🤢🤮. They look great and that’s it! Worst customer service out there and their seats are like riding on a wooden bench! You don’t “break-in” their seats…. you break-in your ass! I have one on my Softail and hate it. It’s been on there since 2015…. so it’s definitely “broke-in”. Lol

I’m coming off an Indian and new to BMW. This video is SUPER helpful to me! Thank you!

Excellent video thank you

Great modifications, fit the bike perfecly. The new exhausts sound beautifull without being loud. Do wear a jacket thought, in case of a fall you'll be torn open.

nice bike 🤩 love the upgrades👍

Great review 👍🏻

Not sure about the Posi-taps. you no doubt used the ones that pierce through the wire as a tap. This leaves a hole in the tapped wire. Not sure I like that. I notice you tapped into a red/yellow wire. I guess this is switched? I would have to look at the wiring diagram to confirm before punching a hole in a wire. I own a 2021. I think you said yours is a 2019? wiring may be different. I guess you added this just for accidents of perhaps road rage issues? Good video brother.

I would have soldered the wires rather than using a mechanical crimp if I was to do this. The Posi-Taps he used actually pierce the harness wire in the center. Leaves a pretty big hole. I really don't like this. Instead, I will find the BMW seat connector and pins. Install that on the corbin seat. That way you just plug it in like factory. I noticed he used only two wires. He left the third wire unconnected. My 2021 K1600B uses all three wires. Not sure what he is doing different. I guess it works.

The Remus sound great, but am I correct in understanding that each side is around 1200 USD?

Where did you get the pads for the top of your saddlebags?

Did you have to buy new wires and cables for the throttle, brake, clutch, switches when you installed the risers?

nice job thanks Dave

What an awesome beast! Just a suggestion for your next mod. Stage 1 or 2 flash tune. I guarantee you, you'll have a smile on your face when you give it the beans

Slowest trip I've ever seen.

thank you! great review!

Great video. Well done. Thank you.

What a great video full of very interesting upgrades. I too have a K1600B GA. You’ve given me lots of great ideas. On my bike on day 1, I added a large V Technic windscreen. I’m 5’9” and large windscreen has always been my preference over bugs. Full, clear and excellent visibility through the screen and air when I want it by lowering the screen and deploying the hydraulic fly by wire side vents. :) This is my third V Technic. Two on my previous K1200. LOVE this shield in every way except cleaning needs to be done gently with only micro fibre cloth as it get fine scratches easily. I had never considered changing saddles until I saw this. What a classy look! I’ve never met anyone that does not love their Corbin Seat. I just has a 400 mile day and was wishing I had a back rest. On a 4500 mile West/Northwest coastal trip, my stock inferior peg rubbers came off frequently, (standing under 35 mph is my preferred way to stretch and limber up). A handy friend modified a pair of aggressive dirt BMW Adventurer spring loaded to stay down foot pegs, no slip, wider deeper and really a very stable way to stand while rolling. High function over attractiveness but they’re awesome. I never knew those nice side 6 covers were available, a new must have for me. I too have those side bag guards from the same company, money well spent. I also added a side stand widener from them. No more worrying about using the side stand almost anywhere except very soft sand. My most enthusiastic find has been my tires. The originals factory B stones were terrible. Rough ride, poor handling and 3500 miles both front and back were cupped and worn out. Went to Metzeler RoadTech 1 HM (heavy motorcycle). 6000+ miles F&B with sport bike handling, touring comfort and amazing traction. Thanks for the well done and informative content. Have you discovered how to reduce the glare on the navigation screen?

Out of curiosity, what was the total cost of your upgrades?

Oh, baby Remus exhaust just beautiful!! You have a magnificent bike sir!

Thanks. Was looking at them today and will try the newer K5 based on a review comparing the K2. Mine will be mounted on a 21 K1600b

Very good video, very good information. I liked your K1600 very much.

Which Tackform mount did you use?

Really cool bike. I think the updates are very tasteful and bike look awesome 👌

Well done! Very informative and easy to understand. Just purchased a 2022 K1600B and having installed several of the items you mentioned.

Enjoyed your video, great job!!! May I ask where you found the saddlebag protection? Working on my own B!!

Thanks man, I'm just in the process of deciding whether or not to turn in my 2011 CVO street glide for a 2018 B. Thoughts ? Your video was awesome and very concise, and I love the mods you did. Gary

Did you need to change any cables when doing the handlebar risers

Well thought out and tasteful mods. I now have seat envy.

Hola, Donde lo puedo comprar el asiento. Me gusta mucho para mi moto .Gracias

Hi Dave. I purchased a few items based upon your review. I purchased the Grip Puppy, LidLox handlebar helmet locks, and the Mo-Door garage door system. Thank you!!