Видео

Would it be better to connect to the ignition?

Stole me a new 450cc😤🫡

So u gotta use a 30 ?

Do I take the fuse from the fuse box on the atv?

Front sprocket cover: 5mm Alan Front big Nutt : 36mm put on 2nd gear and push lock Nutt with flat head and fishing pushing all the way back with 36mm Rear Sprocket: loosen bolts 🔩8mm Alan key + 14mm socket on tire 14mm socket loosen bolt 🔩 on sprocket 5mm socket, do these steps while tire are on ground Next is taking chain off by filling down chain clamp 🗜️ and popping it off with a flat head screw 🪛 . And must put N gear ⚙️ Jack up on axel extension , then roll chain off Take bolts 🔩 off rear sprocket and wiggle to take off your Rear Bar Axel Front sprocket take off if needing to change and out antiC around body lip location if frt sprocket to keep less heat while riding. Please clean access of waisted AntiC on the Drive Shaft Put sprocket on its teeth could be between a 13 or 12 teeth Torque 61 Ft Pound Rear sprocket stock: 38 used for speed But you can put a 42 on it: more used for torque On rear sprocket while assembly use BLUE Lock Tight jell on the bolt to secure your 🔩 bolts Rear bolt tighten takes a 52 foot Torque After putting rear sprocket Chain length should be 520/100. But recommendation is 520/98 Putting the chain on you should start from back bottom roll on rear sprocket to front sprocket, super easy guys Don't forget to put the small packet lube into the clamp hole on the chain ⛓️ itself and on the Master Link 🖇️ too Please don't forget to put the WASHERS on the link and add lubricant Roundside of your chain link 🖇️ plate cover 📔 to face forward towards Front sprocket This will cause the plate to flip over incase chain get caught in to something and chain would easily comes off By A&O Moto Sport Design

Wow ur very theral bro, you're 💯 just need a phone stand next time but you're awesome and great

Only Airborne ADA battery in the world

For all you fucking theives.. Thank this man..

Nice tutorial men really helpful explaining every single details nice

Only thing you got to watch out for is it over heating due to it not wanting to kick the radiator fans on

Fire

Where u get that odometer from man?

I know this a bit old but did you keep the 100 link chain or did you shave it down to 98?

How did you cut out the notch for key hole?

Anti seize prevents bolts or threads from being rusted together, has nothing to do with heat and melting items. Just letting you know

Is that front bumper metal?

Lenght is 3 ft.?

Will this work for the yfz450 . Not to fond of adding the wires .

What drill bit did you use ??? Terrible video btw. You explain nothing. But hey I put my key here.

Is that trail tech from Amazon ?

I’ve got the same chain removal tool!!!😉😂

Awesome

Airborne

Love it but I just don’t understand why people don’t like the emergency brake.

Wow It’s that easy no wonder these get stolen left and right

Try the NiceCNC rock guard with that case saver! Last purchased Feb 15, 2023 Blue View order Set reminder Visit the NICECNC Store 4.2 out of 5 stars18Reviews NICECNC Blue Crank Case Saver Sprocket Cover Chain Guide Compatible with Yamaha Raptor 700 2006-2021 2022 2023/ 700R YFM700R 2009-2021 2022 2023/ 700R SE 2014-2020 2019 2018       

Very educational!

Bros Bumpin in the background 😂😝

Hey man where did you buy them rollers on your rear grab bar?

Quick question my boy , does this kit make the bike move a lot faster ?

This almost be happening to me 😂

Where did you buy the grab bar roller thing for wheelies?

Is your top speed lower cause you went down with the sprockets

Wheeler did you get that wheelie bar from??

Link?

Aye thanks I forgot my key on a campin trip

Is this bad to do consistently

Thank you so much i now own over 5 atv without spending a single cent🫶🏽

👌👌👌

🔥🔥🔥

👌👌👌

Hey which hand guards are those exactly I have a 2020 raptor 700r and I want to buy those.

Why would you go up on both sprockets? If you want low end speed go up two in the back and go down one in the front and that will give you better low-end speed you kind of defeated the purpose by going up two in the back and going up one in the front I can't believe you even got a noticeable difference. When you want more top end you're supposed to go up a tooth in the front and down teeth in the back it's always the opposite from the back and front you don't normally go up in the back and the front or go down in the back and the front. My Raptor had a 14 tooth I went down to a 13 in the front and the back was a 38 and I'm going to a 40. If you take off the front sprocket that you went up on and put the original and you will notice more bottoman power because by going up in the front sprocket you're taking away from the bottom Power. LOL edit that. I just finished watching the whole video and I wrote all of that for nothing. I commented too early

So easy to steal tbh lmao

Thanks for this bro! I own multiple quad bikes without having to buy any and now looking to sell some off!

So smaller sprocket gives lower toque but higher end speeds? or I'm I backwards? I just got a 22 RAPTOR 700 and barley touching the throttle it wants to take off.

I install the same whip but i notice my battery started drianing since install thinking about adding a switch just to cut off power when im not using it did you have same problem?

what exhaust is that ?

Reminds me of older polaris snowmobiles

I wish to know a place like that. Perfect for practice.