- Видео 12
- Просмотров 181 635
Teknisimu
США
Добавлен 8 ноя 2012
Video of everything
30 years old american loundry machine and still stand
Washer milnor extractor and dryer Huebsch originators
Просмотров: 483
Видео
Unboxing $34,000 heavy duty loundry machine Milnor washer extractor with steam caps 45kg
Просмотров 1,8 тыс.Год назад
WASHER MILNOR 36021-V7Z RIGID MOUNT WASHER EXTRACTOR Suspension Rigid Cabinet Classic Controller MilTouch™ Capacity 100 lb.(45 kg) Width 48.75 in.(1238 mm) Depth 75.31 in.(1913 mm) Height 69 in.(1753 mm) Door Opening 21.69 in.(551 mm) Shipping Weight 2073 lb.(940 kg) Cylinder Open Poc ket Cylinder Diameter 36 in.(914 mm) Cylinder Depth 26 in.(660 mm) Cylinder Volume 15.3 cu. ft.(433 L) Wash Spe...
Fix GE washer lid lock switch.Machine won't start,not draining or spinning only flashing lights
Просмотров 15 тыс.2 года назад
Sorry for my bad english ,if you have any question write in the comment bellow
GE washer noise transmission replacement
Просмотров 54 тыс.3 года назад
Ge washer noise. Transmission and brake replacement
Westinghouse washer machine broken drum caused by loosen bolts.
Просмотров 1 тыс.3 года назад
loosen bolt caused drum broken so badly
Frigidaire washer balance load error .DIY fix in minute
Просмотров 11 тыс.3 года назад
fix balance load error frigidaire washer stacker
how to fix dryer,stack washer kelvinator,frigidaire,GE
Просмотров 1 тыс.3 года назад
how to fix noisy dryer,disassemble dryer washer kelvinator
GE dryer noise ,bearing and front kit replacement
Просмотров 1,8 тыс.3 года назад
GE dryer noise ,bearing and front support replacement
GE washer not filling,not draining,not spinning and lid lock problem
Просмотров 38 тыс.3 года назад
fix general electric washer lid lock problem,blink status
High pressure water cleaner IPC tech,pump replacement
Просмотров 7043 года назад
Head unit replacement IPC high pressure
What size socket are you using
I put in a new lid lock switch (two actually) and the lid still won't lock, therefore no spin. Need to know what part on the board signals the switch to lock??
Wish you had video linked to thr sound it made.
Thank you my friend. I bought 2 new hardware and started and broke again. I am so happy.
My washer won’t even light up when it’s plugged in. We just moved in and nothing. Help
You did a great job! Thank you! You talk clearly! Where do you live? You are a genius. BTW, I am so amazed you did this with your gloves on In the other video. Very skilled. Craftsman!
Thankyou ... Im from Indonesia
How do you know if the transmission is failing? What happens is that I changed the actuator and the capacitor on my washing machine and it continues to fail, it thunders like a plane taking off and stops and gets stuck in spin mode.
❤❤❤❤❤❤
Thank you for your service and my washer is working at last.
You are awesome! Got it fixed....bonus points with my wife...Thank you.....
Thank You! I just fixed mine I follow what u did step by step now it is working again its nice to find your channel keep up the good work brother!
I opened up mine and there seems to be so much corrosion.
Can this washer be used with just electric and not gas?
this is electric model
Secadora no enciende
Engineered Obelesence by GE. Shame on GE for making JUNK transmissions. Im on second GE washer. Hope it last longer than first one. Thank you for video, im gonna try to fix my broken one. Great video.
It will not last. GE sold appliance field to Chinese company Hair. All GE appliances are made by Hair now…
A little commentary would have helped tremendously!
Doesn't actually show how to get the drum away from the casing. Only shows unbolting some bolts the skips right to tightening. Not so helpful
eh ada gue haha
Ya ampunnn❤❤❤
Thanks!
He cleaned the contacts
No clue what you did. Couldn't see a damn thing.
Don't quit your day job Pal.
Don’t hate cause ur were to dumb to get yours to work. It worked on mine pal
I just did but won’t work
This does nothing for somebody that's never worked on one. When there's no talking explaining what you're even doing. If you would like some tips on getting your video seen by more people and. Showing up in search wiwhen somebody searches for something like this. Please feel free to reach out and I can give you some pointers
My lid lock was just poorly designed by the engineers. Washer would not spin because one post connection point is a floating connection point and not a soldered connection point.. engineers did a lousy job on this GE locking mechanism. if you can imagine a floating post on inside of locket bouncing around during spin cycles wash cycles it's designed to fail. or last one year once it loosens up absolutely horrible design.
Tengo una igual , el Clutch está gastado y también el drive pulley , suena fuerte mientras da vuelta , puedo cambiar el clutch oh necesito toda la transmisión
Tengo una igual , el Clutch está gastado y también el drive pulley , sueña fuerte mientras da vuelta , puedo cambiar el clutch oh necesito toda la transmisión
How do you know if it's the transmission that is broken? My GE is just like this one and the agitator doesn't work. How can I tell if I need a new agitator or transmission?
Did you figure it out? Mine is doing the same.
If you want to bypass the whole thing, is it possible by just twisting all three wires together that fit in this part?
In normal operation when you hit the start button the lid lock will lock, unlock then lock again in under 10 seconds. This is the main board trying to sense if the lid lock is following the logic command. If you bypass it the board will send non stop command to the lid lock and eventually lock it and will work somehow but will fry the Main PCB(which cost 8 times than the lid lock) in less than a year
In other words, what the other guy is saying is no don't do it. It will ruin the control board which costs hundreds of dollars!
Thank you so much I have been searching for the this fix for weeks so happy I found it because of you video I was able to fix a washer I found on the side of the road that had a sign on it saying free now I have a washer
can you replace just the bearing?
Cara reset manualnya bgmn pak, ? Atau resetnya Auto🙏
Ga ada uang writer Anna Sandra Umboh
Great video, I had already replaced this switch once and was looking for a way to bypass or fix this. This is a really shitty design by GE. These should be replaced free. Someone should file a class action suite against GE because they know this part will fail and are making thousands of $ by selling the same bad switch design which will eventually fail again. I replace mine the first time and fixed the 2nd one but imagine those that have to call a repair man which will raise the totla cost of the repair.
Truly correct, a bad design be GE. There appears to be numerous variations of this GE switch, looking at all the various model numbers on Amazon, and the varrying prices range between 19 dollars to over 70 dollars. The replacement switch for the GE I worked on today costs 65.00 from Amazon. Not sure what the third wire on the switch is for? Great if it works, just cleaning the contacts. I should have tried contact cleaner spray. I didn't see the guy in this video test the third wire connection, and at the end, he seems to have missed testing the middle connection. IN any case, he may have solved the problem by cleaning the contacts.
Class action lawsuit yes! I read another guy replaced his three times. Seems like in a year. Very poor design!
I have this exact model but the problem with mine is that once my laundry load is complete it stays locked and I have to do the most to unlock it I’m wondering if there’s an easy way to fix that?
Outstanding job! My washer works again! And you saved me from having to reverse engineer this.
Take them gloves off can't see what you are doing
One of the buttons on mine eant work flinch back so manybe if i put new spring in..or can 8 by pass it to make it work?
You cant by pass the button that i put back.Just put one button like in the video
very helpful. thankyou!!
Was it a bearing?.
I fixed my washer!!!! I didn't have the meter. I just took it apart, sanded it down, put back together and ta-da! Kisses to the maker of this video. Love a free fix. :)
😂🔥 good job
Very old, of course, but imagine all of the abuse they have taken since they run all day every day and used by the public.
Phenomenal video. I wish I could give it 1000 likes. And your English is perfect.... very clear.
Thank you 🎉
Mmmm but you don't show how remove the basket!!!
This worked for my yhe clip was brothen inside
Este método de intervención, Pone en riesgo la tarjeta, al engañar la señal. Quemando el transistor de señal.
THANK YOU SO MUCH!!! BEST VIDEO on the internet on how to fix this annoying issue!
This guy doesn’t say a word so I have no idea what he’s doing even if I can see it.
If you can't follow this video you have low iq sorry
A drill with a clutch works for every bolt but the nut for the basket. You could have had this done in 15 minuets.