Видео

Where is the bell housing?😂

Thanks for this!!! Im having the same damn problem on my chevy 350. . . . .Didn't know what it was thought it was rod bearing so i changed them out and problem still there. . . .so now I got an answer.

On my 57 I redrilled the holes in the axle plate to move the axle back 3/4 inch . Wheel looks better in the well and better fitment of a larger tire.

Just fixed this issue on my 1977 vette… I thought maybe the flex plate was cracked so I turned it by hand and inspected it carefully. No cracks visible so I ordered a shim kit online that gives it clearance so it doesn’t touch anymore. Noise completely gone and no issues! My starter was made by proform and shims are available

Mine is doing the same thing lol, nothing during a rev and sounds like a broken rotating assembly at idle 🤣

I see a groove worn into your drive shaft. What caused that? Do you know?

Did u solved this issue ? Could u plz tell me what was the issue and how can we fix this ? I have the same issue with my Mazda 6 2015 automatic, I have this kind of noise when it’s in idling mode and when the car moves in low rpm

this noise happen while at idle??? Why? Starter is not aligned properly?? Simply giving out?

Good video brutha. Thnx for sharing

thats nothing, just grind it thru, it will stop eventually (no pun intended)

Very good show, thanks!

When I start my car there’s a loud clanking/ grinding noise. Once it is started the car runs perfectly. This started happening out of nowhere. Any idea what it could be?

Warped or broken flex plate. It is not straight

Man I been looking for a reason why my truck started doing this en thanks to you video I can go end for the problem thanks I had help like you have no idea

I WENT TO ROSE BOWL ON 4TH JULY!!!!!!!!!!!!!!!!!!!!!!! GO LA GALAXY!!!!!!!!!!!!!!!!!!!

I have the same sound on my 2011 Buick lacrosse and I’ve seen some metal shavings under hood.. do you think I need to stop driving the car or it’s still drivable?

I just put a new PowerMaster starter in my GTO and now I'm getting a little ticking noise I knew it had to be the starter cuz it didn't start till I put it on

Looks warped a lil

My car does this in neutral and park its weird

I have the same issues i had replied 3 Bendix drive now coz the flywheel is just cutting them

Starter is way to close to flex plate starter gear should only contact max 60% of flexplate teeth

Thanks for the video. Ordering these today for my 56 four door.

Mine sounds like a rattled heat shield. The starter shows no damage on my Crown Victoria

Mine does this only when I go 40 mph. I seen the flywheel is missing a tooth. Could that be causing that noise? Anyone know?

Man you ripped that out no problem I had to use a putty knife 😂

Did you have to remove the carpet to get to the bolts? I have a 57 Bel Air that needs new body mounts and body brackets

I have this same sound on my 2009 Honda Accord Coupe 2.4L , it grind super hard for about .5 seconds once I start the car then literally goes away while I drive then when I slow down at a light it idles super hard and I hear this same exact sound I replaced the starter motor and still hear this sound.

The smaller one on the starter is stuck by mine… it doesnt pop off

Have you ever tried finding the remains of Coogan's Cabin? It's supposed to be near the confluence of Manter Creek and the SFK. Pretty close to where you're at in this video.

Can it be trimmed to keep body body mounts

What’s done about body mount

Bad A$$$

late to the party here, but which size bolts did you use ?

x por fvor m podria decir k fue lo k le izo para k arrancara en español por favor

k fue lo k le hizo

👍keep the tri5s alive!

Sometimes the bendix is broken and it slides into the flywheel and makes that sound but more intermittent

Unless it's cracked loose or you feel vibration all you gotta do is put in a starter shim

I like that you can only tighten them so much and not have some tighter than others.

Hi. I've got a 1998 Nissan Pathfinder, 164,000 miles, 3.3L V6, 5 speed automatic transmission. When it's first started it knocks or rattles for 3 seconds. Then it stops. Once warm it will only do the startup rattle about 50% of the time. Exact same noise returns from about 1,800 to 3,200 RPM and then stops. If I'm going up a hill it won't do it 50% of the time unless I press the gas pedal and cause RPMs to sharply raise. The noise increases with RPMs increasing. The main bearings and rod bearings were changed. Looked good. No rod or crank shaft slop was noted. Oil/filter is new and full. Same with transmission fluid. I've narrowed it down to 4 things based on its part time occurrence: 1. Flex plate? 2. Timing belt tensioner failing (unknown when last changed)? 3. Torque converter? 4. Hydraulic lifters? I have two short videos I recorded it and can share. Thanks!

Horrible music, speech was inaudible.

cool sound!

Shim the starter

Nice, my Dad just gifted me a 1956 Chevy 210 Sedan, needs some work on it but can’t wait to finish it

I just replaced the starter motor ( Chrysler town and country 2006), the same sound, I get really scared

I get that sound in my skylark when I do burnouts.

What are the bushings you used like the brand

Liked the video but the audio was bad ! Did not need a long time on the burn bulb . Best video yet.

ok, after cutting the bolts off, how did you unscrew the rusty bolts from the rusty holes to install the new bolts?

My 300ci inline 6 shakes a hella lot unless I get to the upper 2500-3000 RPMs. I done checked my distribution and spark plugs and they seem fine. I bet the flexplate is to blame for my rough idle/low RPM.