Видео

Nice and helpful tutorial, but WHY is there always this horrible, distracting music in the background? It's soo annoying. Well, I don't think people come here to be "entertained" with annoying elevator music (there are better places), they just want information and tips. So, it's best to turn the sound OFF and just pay attention to the subtext.

Hello! Do you know if there is a way to change from a donor the lcd of the viewfinder? Thanks in advance either way!

Seems easy, especially being the same but no ST on my L1. The reason for me to do this procedure is lubricants to make the film advance light and smooth. Question: where are the lubricant gears/points? And any other (shutter gears) that may need oil after many decades? Thanks, great video!

How can I buy one?

i need part 1 broooo :<

Excellent video, it clears a lot of stuff up in regards to working with this camera. One question: what oils and greases to do you use and why do you use them in that particular situation? Or any oil at all? In one you use the small bottle with some oil (which one?) and later you use "graphite grease" which seems much thicker and you apply using the back of a Q tip.

Please help me!!! I just got this camera the electronics works but it apears redlight that is working.. even if i point in the dark areas…

Hehe, thanks, I reached this point, now need to find out why it is not letting the shutter go after pressing the button unless I turn the winding knob a little bit

Hello ! Nice video! Do you show how to separate the lower body ? My camera looks so similar, except for the “x” between 1/30 and 1/60 on the dial

Bien…mais pour moi le calage n’est pas bon. Il se fait au 60/em de seconde Ou trouver du fil de tungstène et quelle section ? Merci

Any ideas on i the check light comes on but the the shutter speeds all fire the same still and the over under lights don't light up??

Thank you. If my YE35 has this problem I know what to do. You should have started with showing the battery check light not lighting, and the battery being charged.

The post that the rewind nob screws onto is outside of the camera and the film door is shut. I need to open the film door to get the post in but I need to get the post in to open the film door. Please send help or sympathy.

Thanks vor the good repair video! Does this also work the exact same way on the canonet ql17 g-iii ?

have you adjusted the short distance on one of these cameras?

Excellent Thank you

My exposure counter only resets to 30 or 31. Any idea if I’d be able to fix it?

NOOOO!!! I need to see the ending!

hello i have my 35 sp with working meter but doesnt work on auto mode ( a + a ) at all shutter seems to fire at 250th - 500th

Hi again - something super important to note is that the 1/30 and 1/15 speeds will appear to be too slow when the case of the camera is not reattached. I was very confused about this until I saw someone's forum post mentioning it. I think it's a big omission from the video!

Thanks a lot for this video. I used your other video to clean out the top parts, next I will do this. My slow speeds are about 1/2 the speed that they should be!

THANKS!!!! This is the video I've needed! My QL17 has been on the shelf for 7 years because of this issue.

Hello, I just got a L1 and the film advance is a bit stiff, could be smoother, and hoping you will have a video on how to fit this.

These videos are so useful, thank you for your service to our community. The light meter cells on mine look quite dirty, but I guess there is no way to get inside there and clean them without damaging it.

This magnet looks like to two wrapped coils. Isn't there a way to fix the magnet ?

Thank you very much for the video! There was a problem with 2 small contacts, because of which the AV/TV mode change did not work, I removed the cover, disassembled the mechanism, bent the contacts and cleaned the tracks. Everything worked!

Thank you … thinking about doing this with an old Leica to allow me to get to the vulcanite cover.

thanks for the upload, this helped me service mine and clean out some fungus. Shockingly easy to do with a cheap amazon lens wrench >.> this hobby is too expensive

I’m getting 0.6k ohm on my magnet. Is it faulty?

How did you come across the tool to remove the front lens element? I'm worried i'll damage the aluminum ring holding the CdS cell. Do you have any suggestions for someone trying to do this project with out that tool? Thanks

I'm amused by your wireless solder iron, didn't event knew that such thing existed.

hey there. bought a yashica electro 35 gsn and power comes to the board,but the times are always the same and the light don´t work at all. do you have an idea what can cause this problem? best wishes!

My D7100 have problem. Viewfinder display (all aspects, including data at bottom of screen) disappeared, The lights are on but very dim, almost invisible. Have tried several reset user settings, taken out battery, changed battery and pored over manual, but no display whatsoever. Is it possible that the socket flex cable doesn't fit properly? where is the viewfinder socket located. Any ideas? Much appreciated.

What's the BIG grey gadget doing on the lens ... unscrewing something but not sure. Where would you get this tool?

You should better wear gloves when cleaning the lens.

the focus lever on my canon canonet ql17 giii sometimes has trouble turning like there's some gunk in the way. do you have any recommendation on what I can use to get it turning smoothly again?

molto bravo , o una 35 SP lamelle obbiettivo bloccate , come fare? grazie artista.

Anyone know what's going on with my camera? Shutter curtains don't cycle and mirror gets stuck. Mirror does not drop down in X or B mode either. ruclips.net/video/YZuTS1FYqQI/видео.html

Tje Light Meter work on my 35sp but when I push the Spot meter the nedle goes instant to Zero. Do you have a fix for this? Regards

Really appreciate this video! Going to try to figure it out myself, but my film advance lever doesn't snap back after advancing. Any idea how to fix this? I have a spare demi ee17 for parts and to practice on. Hoping I could swap a part from that one if possible. Thanks in advance!

awesome video. on my ql17 the whole lens+shutter assembly wiggles ie. is a little wobbly. is this "normal" for a ql17 or maybe those 4 screws need to be tightened?

Leave it to Canon to design something that is hard to fix. The parallax adjustment screw should have been design for easier removal.

Thank you for such a detailed and helpful tool list in the caption 🤍🤍

Be nice to have commentary and closer view. Not so much tie on the cleaning?

Awesome video! You saved me some money.

Hi, thanks for the video! I was wondering what you had in the syringe bottle, isopropyl alcohol or lighter fluid? Also, what did you use to glue the leatherette cover back on?

My aperture ring on GSN feels bit jamed comparing with other cameras f rinv,but it works.should i be worrying about it?

Do you edit out getting pissed off and throwing the mostly disassembled body into a box , never to be messed with ever again?

helped me clean mine, thank you!

I soak pentaprism in isopropyl alcohol to remove old foam adhesive. If you leave it the old adhesive will cause de-silvering.