- Видео 67
- Просмотров 643 639
Jeremy Curtis
США
Добавлен 18 сен 2006
Just a guy and his creative projects trying to spread a bit of creative inspiration. I believe that everyone has a creative side, if they were to only let it out every once and a while. This channel is designed to hopefully take away some of the fear of starting.
How to make your own motorcycle seat! Part 2: Cover and finishing.
Continuing our process from the last video, this time we tackle the seat cover as well as the finishing for our new motorcycle seat.
For a written process with pictures, please check out the link below!
jc-custom.com/2023/05/18/1980-honda-cm400-scrambler-budget-build-part-4-seat/
For a written process with pictures, please check out the link below!
jc-custom.com/2023/05/18/1980-honda-cm400-scrambler-budget-build-part-4-seat/
Просмотров: 1 020
Видео
How to make your own motorcycle seat! Part 1: Seat Pan and Foam.
Просмотров 2,6 тыс.5 месяцев назад
This video shows the process of fabricating a seat for my custom 1980 Honda CM400 scrambler. Below is a link to the blog post with extra detail. jc-custom.com/2023/04/05/1980-honda-cm400-scrambler-budget-build-part-3-seat-pan-gauge-handlebars/
Custom DIY TV Gaming Table: SETUP
Просмотров 3127 месяцев назад
I built this gaming table for our DnD sessions. I didn't want to spend too much, so after finding a used TV and using the cheapest materials I could at Home Depot, the whole build came out to about $200. FULL BUILD DETAILS: jc-custom.com/2024/03/15/custom-tv-gaming-table/
1980 Honda CM400 Custom Scrambler: TEST RIDE
Просмотров 3,8 тыс.Год назад
1980 Honda CM400 Custom Scrambler: TEST RIDE
BUDGET BUILD: 1996 Honda Shadow VLX600 Bobber
Просмотров 19 тыс.Год назад
BUDGET BUILD: 1996 Honda Shadow VLX600 Bobber
TIME LAPSE: 1980 Honda CM400 Custom Scrambler Budget Build
Просмотров 14 тыс.Год назад
TIME LAPSE: 1980 Honda CM400 Custom Scrambler Budget Build
COMPLETED! 1980 Honda CM400 Scrambler: Budget Build
Просмотров 4,6 тыс.Год назад
COMPLETED! 1980 Honda CM400 Scrambler: Budget Build
TIME LAPSE: Backyard RC Track Complete Build
Просмотров 7 тыс.Год назад
TIME LAPSE: Backyard RC Track Complete Build
Friendly Race on Home Backyard RC Track
Просмотров 1,2 тыс.Год назад
Friendly Race on Home Backyard RC Track
Snowmobile footage from the early 2000's
Просмотров 421Год назад
Snowmobile footage from the early 2000's
Starting a Budget Honda CM400 Scrambler / Tracker Build!
Просмотров 934Год назад
Starting a Budget Honda CM400 Scrambler / Tracker Build!
Amazing Timelapse of Garage Climbing Wall Build (fast version)
Просмотров 1,4 тыс.2 года назад
Amazing Timelapse of Garage Climbing Wall Build (fast version)
TIME LAPSE: Climbing Wall Build in Our Detached Garage!
Просмотров 8512 года назад
TIME LAPSE: Climbing Wall Build in Our Detached Garage!
DIY Custom Hand-Carved Telecaster Electric Guitar
Просмотров 4803 года назад
DIY Custom Hand-Carved Telecaster Electric Guitar
1982 XJ650 Yamaha Maxim Bobber - Budget Build Walk-Around
Просмотров 18 тыс.3 года назад
1982 XJ650 Yamaha Maxim Bobber - Budget Build Walk-Around
Ain't Talkin' Bout Love - Guitar Cover
Просмотров 2526 лет назад
Ain't Talkin' Bout Love - Guitar Cover
Ayy look like mine but mine needs to be sand blasted, and mine a nighthawk 450
Mi pregunta es si es fácil encontrar refacciones de esta moto
Es. Honda todavía ofrece muchos de ellos a través de concesionarios y además hay muchas opciones de posventa.
Hey man what bars are those I have a bobbed 05 shadow and want to change my bars but idk what to go with
@@jovangonzalez-ocasio6291 they are these speedline bars from TC bros. amzn.to/3YhD2Yn
How tall are you?
6'3"
Tyre size??
one day i’ll have me a classic bobber like this
Is it possible on cm400 put cylinders from 450?
Hmm good question. I have no idea.
Cooool !!
We’re did you put all the wires which was in the headlight? And what kind headlight did you install?
@@andyor3114 I tucked most of them into the headlight bucket and some under the tank (the wires I clipped and don’t use). I usually don’t pull the unused wires in case I change my mind in the future lol. Parts I used can be found here at the bottom of the page. jc-custom.com/motorcycles/icarus-1980-honda-cm400-scrambler/
Pas lagi langsam suara nya kereen..pas ditarik gas nya so langsung jadi keren-peng suara nya..thats a harley maleholo 😂😂😂😂😂
I am building a custom cm400 into adventure bike
Heck yeah man! This is my “scrambler” and it’s super fun when running. I have fought endless carburetor demons on it though and this time ran it low on oil.
@@jcurtiscustoms i fixed my carb issues last week . My bike sits 11 inches higher then stalk 1980 cm400
Dang. 11” is a lot! Nice!
Honda cm400 ?
You got it!
Sweet ride
@@AmericanMuscleGarage thanks!
Escapamento original aberto?
how tall are you
6' 3"
Walls are meant for building.
Good. It is so good.
🤙🙏
Nice, simple, clean
Thanks!
Hey I just got a vt600 shadow and I have a question, where the frame was cut it hits the fork and they dent each other, i don’t know why, I mean these are stock parts I think there should be some sort of end stop when the shock also is fully compressed and the frame should have a minimum of clearance. If you have an email to give me I’d like to send you some pic to make you understand better.
I will be honest, when it comes to the mechanical bits of these bikes, I really don't know a lot. The only thing I can think of is that if your front fork is riding that low, then you are probably missing the spacers or one of the springs inside the fork tube.
I've done the same thing, using a handlebar mount camera holder on a piece of pipe I screwed onto my saddle bag mounts 😂
Hell yeah! Nice.
What exhaust is that?
Unfortunately, I don't actually know. It was on the bike when I got it. What I can tell you, however, is that they are hot AF and real leg burners when you are stopped lol.
What’s the height of the handlebar?
They are 7.5" tall. Here are the exact bars I used. amzn.to/3zkcH3p
🔥🔥🔥
🙏🤙
what are the tires?
I believe the rear tire is this. amzn.to/4egKBou Not sure about the front. I sold the bike last year.
waooooo 😮 very nice 👍🏻 when can i have a motorbike like this
Thanks! I would guess as soon as you buy a cheap on one facebook and build it? I don't know. That's what I did lol.
@@jcurtiscustoms hope so too, hopefully by working hard God will give me many miracles, thank you very much for your support, my bro🙏🏻😇
Very nice work,fixing to convert my 76 400f honda supersport to a scrambler,you've inspired me
thank you! They are super fun bikes / projects.
That's a lot of clutch slipping to start. Did you put a smaller rear sprocket on? That is a clean scoot. Might find one to bob later, and keep my stocker for travel.
Thats the gayest thing l see all day!
Working on a 1980 CM400T right now. Where did you get that tank from?
It was the stock tank from a CM400E.
End result looks amazing, great craftmanship!
Thanks! It honestly turned out better than I expected.
Espectacular pura adrenalina
Под дождём самоё то 😅
I love this build so much and using it as an inspiration for my long term 450A Brat look….. can I buy a set of those 3 inch tall custom handle bars…. They look great! Is your Jc custom website the best way to contact offline? Thanks so much!
Thanks so much! I am not sure I have parts to make another set, unfortunately. I would have to look. Basically, I just cut up a couple other sets I had lying around. And yeah, my website is probably the best way as it should go straight to my email.
❤❤❤
Steed*
You know, people keep replying with that lol. Here is a picture of the original. Tell me what the tank says. Maybe I can't read. jc-custom.com/2021/01/20/shadow-bobber-project-start/
@@jcurtiscustoms kid i can swap tanks its a no brainer lol 🤣
Well just so you know, they are called Shadows here in the US and Steeds overseas...so there's that. 1996 Honda VLX 600 Shadow Deluxe. Not trying to spread negativity or argue. I just like to reply in case people actually read these and don't get confused. Here's another example for you. ruclips.net/video/ldSUtekgDUs/видео.html
Nice bike ! Wish it was mine 👍🏆.
Thanks! It belongs to someone else other than me these days as well 😐
Very nice work. I just bought a 80 CM400T, I'm going to Bob mine, I havent decided If I'm going to Hard tail it or not, I probally wont, I'll probally just get some 2016-2019 Suzuki Boulevard shocks, the Honda stock shocks are 13" tall and the Boulevard shocks are 10 3/4" tall, that will give me a 2 1/4" drop in the back. I wanna go low but not too low.
Thanks! I bobbed a similar bike in a 1982 Yamaha XJ650. I left the suspension as-is as my lower back is bad enough as it is lol. jc-custom.com/motorcycles/maximus-1982-yamaha-xj650-maxim/
@@jcurtiscustoms Yeah I like Bobbers and I like smaller bikes. I'd love to get my hands on a late 70's or 80's Triumph and Bob it.
I just bought a 1980 CM 400T for $550 last Thursday, they guy I bought it from said it needed alot of work, Once I got it home I took the battery out and threw it on my Battery tender for the weekend, contrary to popular belief most "old dead batteries" can be recharged and will last you another couple years, I work for Indian Motorcycles we do it ALL the time when pick up an auction bike, and then took the carbs off and cleaned them real well and put them back in and then got some new spark plugs. Last night (Monday) when I got home I went out to the garage and threw the battery in in and a gallon of fresh gas in the tanks, took me a couple cranks but she fired up and I took around the block a couple times. I'm going to Bob mine on the cheap, I've got a factory solo seat off a Honda Rebel that's I'm going to dye Saddle Brown and stick on it. I'm going to paint the frame brown and the tins White and put a Orange, Yellow and Brown pinstripe on the tank and the Fenders and paint the mag wheels a burnt Copper color and make it a retro period correct late 70's early 80's custom bike.
Hell yeah man!
Sir what handle bars are those? Sweet bike!
Thanks! The bars are these amzn.to/3YqWOlV Full build info in this link. jc-custom.com/motorcycles/jackpot/
Look with a springer front end
Probably would have to fabricated it, but it would be nice.
walmart helmet lit
What do you apply after so that it doesn't get a crappy and faded?
Well usually nothing since they are aluminum blocks. BUT I know some people spray over them with high-temp clear like this amzn.to/3LNiXmR
Nice tires! What brand do you have here?
I honestly don't remember what they were. The person I bought the original from had just put new tires on, so I never had to mess with them after doing the rest of the customization.
I’ve seen the Saran Wrap tech before. Looks good
Thank you!
Mirror positions gets me every time. too cool
Thanks! I always preferred the under-arm location for both looks and visibility at a taller guy honestly.
you can go from just a regular guy or gal to the coolest regular guy or gal just by getting onto a bobber like that
Idk man, bobbers look wack asf in my opinion
Very beutiful bike, been looking into them but they seem a little uncomfortable to ride in for a long time for someone that is 5,11 or over, can someone tell me about it.
Thanks! I am 6'3" and the height was never an issue. Granted, I did move the seat back a little when I was building it. That said, the bobber style bike is never really going to be great for long rides due to the seat. This one has more cushioning than most, but after an hour, it's still a bit rough.
@jcurtiscustoms alright thanks for letting me know. I was just wondering because I live far from the closest town, but I still am considering getting one. thanks
Nice bike!
Thanks!
Thanx for saving a Goldwing!
Awesome bobber 😎
Thank you!