- Видео 3
- Просмотров 3 576
Dork Missile Performance
США
Добавлен 3 янв 2021
Laseris 8 laser toe and camber system
Laseris 8 setup system for 1/8 on road and off road. Truggys are not accurate on this system due to the varying track width used by each manufacturer. This may cause the camber to read as much as 1 degree off.
All kits are sold by BeachRC.com
All kits are sold by BeachRC.com
Просмотров: 38
Видео
Review of Elceram Nitride esc
Просмотров 1,8 тыс.8 месяцев назад
This is a review of the Nitride 1/10 esc by Elceram. I am not paid by nor did they supply this esc. So it is my unpaid opinion of this product. The throttle response is butter smooth on this esc in default mode.
Laseris video
Просмотров 1,8 тыс.9 месяцев назад
This is the next evolution in setup systems for Rc. It takes up less pit space than the average charger The laser dot is 1mm in diameter the camera does not do it justice, making it look like a large dot with no definition. Sold through Beachrc.com
Great review, after watching this decided to grab one as i was going to buy another XR10PRO. So happy with it,the screen is used by Team Blacksheep on their crossfire module for drones,and is extremely solid... Thank you for posting this,i bought mine from Smokem Racing,here in Australia. Subscribed to your channel as well. Cheers mate🍻
looks awesome...good stuff.
Fantastic review, still one of the only ones out there on this unit. Have any other insights to share now that you've had it a while?
The PWM setting is adjustable in .1 increments rather than presets and I prefer this now that I have been working with it. If you want it to monitor the temp of other motor manufactures they have a calibration mode to solve that too. I am now looking forward to getting one for the 1/8 scale when they come out. I would buy this again.
Are you still selling direct?
Feel free to contact me at Dr_howard00@yahoo.com use the subject line of Laseris
I loved it so much I made my own video about it. This is my 2nd time using it. It is so impressive! ruclips.net/video/p0GdYMxA1pg/видео.htmlsi=_DN0f1h6RGP1WGYI
This is the best RC Alignment tool for camber and toe out there, in my opinion. 2nd time using it! It's fast and easy. In fact, it's too easy that you think it can't be accurate, oh, but it is! I thought I had a decent setup using Hudy ride height gauge, Jconcepts camber gauge, and RPM toe gauge, but I didn't. I instantly improved my laps times big time! it got rid of that twitchy handling at times.it was now too easy to go fast! The lazer pick up points on the setup dot screen is unreal to see. It's hard to see in the camera. When the dot hits its pick-up point, it like a traffic light going from Red to Green or a tail light at night and then hitting the brake light. It really gets your attention.
0:57 you weighed the wire you cut off but not the ESC??? you dont have to wonder if its "probably very competitive in weight", you have a scale. 1:23 so it does require a fan under certain circumstances? how does that work, by taping a fan to the chassis and aiming it at the esc? is that REALLY the best option? this seems like a gimmick. thanks for the review, its the only one i have been able to find in english.
I had no intent of doing a review until I was so impressed with the product. The ESC was mounted in the car when I decided to look at what the weight difference was, I wasn't going to remove it so I did the next best thing weigh the scarp to determine the adjusted weight. I haven't had the esc temp go over 102 on 80+ degree days with no fan and the company claims it doesnt need one unless you run outside on asphalt with a 4.5 turn touring car. I run a 8.5 and 6.5 in 4wd off road so its under a load. My Trinity and HW XR10 Pro always had to have a fan to avoid overheating on the same track. I agree the fan on a chassis in a off road vehicle would never work out due to room but I dont see it needing it as they have stated. Just a quick idea if weight is your concern. All weight with wire, 5m plugs and fan as I have run them (Nitride no fan). I had the esc out today because I needed to do a through cleaning. Overall they are all about the same in weight as fitted to the same chassis my opinion is the Nitride has much smoother throttle control than the others that I have used (listed below). XR10 Pro 79g MX10 Pro 80g Fleta Pro 79g TS 160 Pro 80g Nitride 78g
After speaking with the manufacturer, they confirmed the data from a run is cleared once you turnoff power. Still nice option but data is not held in memory. Just something to keep in mind if you are using it to determine gearing on a motor.
This is fantastic 👏
It can now be ordered from Beachrc.com
cool idea! very simple and thought out.
When you set one side it changes the other side projection and vice versa.
if one side is greater than 2 degrees off of what you want to set it to, then yes you will need to repeat the setting on the first side. I have found that when it is with in the 2 it doesn't need repeating.
@@deanhoward9998 vary nice!!
i find this hilarious and awesome at the same time lol
How much is the kit.. does look like it would be a good kit
The kit is 150 + shipping, average shipping has been 25.
Thank you for your time. I will contact you soon on getting one
Will it do 1/8 and 1/7?
I am currently testing the parts to make it work with 1/8 scale. I should have them ready for production by the end of Feb.
Will it do 1:1 scale?
@@deanhoward9998 1/8 should work on 1/7 too. Let me know when.
@@hankadelicflash LOL You are looking for a Snap On
@@troymonroe9656 I haven't worked on enough 1/7 to remember if they use the same diameter hub system as a 1/8. If they do then the answer is yes.
Is this available for purchase and if so where?
I can take the order direct for now until a distributor is secured. Payment is through PayPal. dr_howard00@yahoo.com, average cost of shipping has been $25 for most every kit shipped to date within the states