Видео

At the end when you point out that "some people say you can remove this shield", you are actually looking at the bracket that holds the heat shield which was already previously removed. The two empty holes hold bolts that hold a heat shield.

Can you change the filter without doing a drain and refill?

Pissed myself laughing. You totally contaminated the filter with the hacksaw swarf.😂

How much fluid did it take?

Should have filled the oil filter 1st

What size is the fitting that spits grease in there?

Hello mine 2015 Tacoma 4 dr just want to know how many zerk and does it same similar all truck or differnt year?

Is there a specified amount to fill the fluid? Or just look and estimate?

Nice SUV why cheaping out on using costco oil must have used a quality brand like mobil 1 or Castrol edge

Who ever puts that cladding back on is stupid

as long as your oil meets the current API service requirement and meets the specifications of your manufacturer, the brand doesn’t matter. I just like name brand oils because they’re familiar to me but if it has the API donut and your car’s manufacturer’s certification on the back, it’s perfectly fine. kirkland oil is blended by the same company that makes walmart super tech which is also an API certified oil.

The "heat shield" near the differential drain bolt is actually just a protective shroud for the carbon filter. good video

50 K vehicle and look at this hood support - 1900s Technology, it's a shame.

Nice platinum HL with a clean engine!

10:00 drive it to the ocean 🌴

Anyone has part number for the splash shield? Mine has been stained with I'm assuming oil by the dealership and looking for a replacement.

❤❤❤❤❤❤❤❤

Do you need to add any additives to the system?

Where did you get that pump thing?

I miss having a garage

Always remove the fill plug first, before draining the fluid.

Thanks for encouraging more of us to do oil change.

Not sure how u got a accurate reading on the dipstick with your vehicle on the ramps...

Do you need to check the oil again after the car is level?

Not on the oil change topic but question. I have a 2020 highlander XL. IT AS BEEN EXCELLERATING WHEN IT'S COLD . IT DOES IT INTERMEDIATELY. TOYOTA A ND THE DEALERSHIPS SAY " CAN'T DUPLICATE ". THEY HAD IT FOR 21 DAYS ONE OCCASION. THEY THINK WE ARE STUPID AND WILL GO AWAY. IT STARED DOING THIS LAST JANUARY. I HAD THE BREAK NAILED TO THE FLOOR AND IT PUSHED ME THRU 4 STOP SIGN INTERSECTIONS AND TRU A RED LIGHT ONTO A MAJOR HIGHWAY . I DOCUMENTED TIMES, LOCATIONS AND WEATHER. IM A RETIRED POLICE OFFICER OF 22 YEARS AND FIRE FIGHTER EMT OF 5. All they wanted to know was anyone hurt or killed . I was trained to know what to do. PUT YOUR CAR INTO NEUTRAL ! Once the engine reves up to 7,000 rpm the engine/ throttle will reset . This year it STARED again. My warranty is expired I've just turned 35,000. It started when I had 21,000 miles. I've spoken to 5 others who had this issue and they got the same responses from TOYOTA U.S.A. and the dealerships. Lastly on my menu that tells you maintenance required. Warned me that maintenance was needed. It stated transmission and throttle problem. I showed the 2 dealerships I took the vehicle to . They told me to disregard those maintenance ⚠️. It was suggested that I had my foot on the accelerator, I was power beaking or I had my gas cap off. IDIOTS. TILL SOMEONE IS KILLED OR SERIOUS HURT . IT'LL BE IGNORED. I CALLED THE NATIONAL HIGHWAY TRANSPORT SAFETY BOARD and no help. One dealerships suggested I trade it in ! IDIOTS. I ask highlander owners of 2020 to 2022 if they had this happen to them. One person said her son is a service manager. He changed the electronic excelleration module a $695.00 part. So be warned and safe.

Hey guys. Thanks for the video. What mileage did you do this at?

👍😎👍

My differential damper is hopping creating a horrible noise, I can physically move it around. Replacing it should I replace fluid as well?

Hello! Just want to ask on what ramp did you use? I hope you can help me out. Tia

Thank you for the Tutorial Video. A question: which is then the best practice after refilling final drive fluid, in order to better set the differential working correctly? Like, a smooth ride on a large square with full right/left steering, in order to set diff to work? Or, for instance, putting car on a full Jack suspended mid-air, then smooth accelerating and finally, without acceleration, stationary brake in order to put a slight torque to rear diff? Or, nothing? Thank you for answer

Great vid. Shouldn’t we be checking the oil level after the vehicle is off the ramps and on a level surface?

Dont forget to add a light oil coating to the O rings, Great video!

Great video, clear details. Thank you for taking the time to share. One tip for draining oil from the oil filter housing using the plastic purge valve, place the end of the valve on top ooening of a Gatorade or soda bottle, press it up into filter housing and the bottle catches all the oil from the filter housing. I love those low profile wheel cocks..!!

Thank you for the video, very well explained to understand it. Now I’ll change the oil on my 2020 Toyota Highlander and save me a little money, because the Toyota was charging me 250.00 for the oil change since my 2-year warranty is over. Thank you very much.

I just changed the transmission fluid in our 2007 CR-V with about 215,000 miles. My sister bought the car new and sold it to me about 7 years ago. She could not remember if the fluid had ever been changed or flushed so I figured it hadn’t been. I usually remove the fluid pan but didn’t on this one because it had an outside filter and magnet is on the drain plug. I drained 3.4 quarts(3.22 liters) and replaced with new fluid. I also replaced the filter on this video with factory filter. I risked that the transmission might start slipping but after weeks of driving it hasn’t. Drained with car cold and replacement fluid at same ambient temperature. I wondered how dirty the filter could be and if it might be blocking flow. I was happy to see someone had cut it to see inside. Thanks

Great video. I have a 2016 Highlander I’ve change the oil on it many times. Couple of recommendations. Keep the plastic drain attached to the housing while you’re loosening the main housing. You’ll find that more oil comes out as you unscrew the housing. I also bought another filter at one point I forget which brand but it had a screw on attachment instead of that push on that the Toyota filter comes with. I actually keep it and reuse it it’s actually very nice. Costco oil is great I use the same stuff. I also have marked an old orange juice plastic container with the additional amount above and beyond the 5 quart jug. That way I know the exact amount I want to fill up every time very easily. I have the same problem seeing where the mark is with new oil it’s almost impossible. Therefore with this orange juice can technique I don’t even really look at the quantity. Just got done taking the transmission pan and cleaning the magnets just yesterday. 90,000 miles and it’s running like the first day I got it. Great job working with your son on car repairs!!

ATG & I say go back & look under again to see if ATG's (4:45) is worn. Shops will miss & all DIY didn't know about it. ATG's Honda #50716-S9A-000 is around $100.00.

Hello, I have.a.honda crv 2006, engine type is R2A, the gears are getting stuck and delaying changing, I have changed atf oil. Please help

Did you paint your engine splash shield? Looks like you have the off-road package and I thought they came in black... Looks good.

If you hold the oil bottle sideways, oil flows out easier and smoother.

great video

Please be careful on loosening the filter housing. The dealer had ours on ENTIRELY TOO TIGHT. I broke the housing getting it off & now we can’t drive it until I get a new one (I had already drained the oil).

Yes, we showed the washer at about 55 seconds into the video. The Honda part number for the washer is in the description.

No information on resetting the service required notification on the instrument cluster

I did the exact same service, great work guys...

No mention of that Grey clip, I guess you just left it there...didnt seem to be much interference with the tool to remove. If you get the other tool, this clip needs to be pulled downwards.

nice job both of you

Waste of plastic..to empty it !! NOW , garbage and earth filler , garbage dump ..NOT EARTH FRIENDLY at all, PLASTIC !!

Hi. Great video. Did you replace the crush washers? If so, what sizes are they? Thanks.

Good advice…covered all the bases.