Видео

@thorellsinspired9593 Yea time got away from me! Thanks for the nice words. Look at the color dot on the video. I believe it is Blue. That would be my high jacked channel I cannot get back. Go for the one with the red dot It has not only all my old vids but all my new ones as well. Let us know how it worked.

I may have that backwards but I'll check and get back to you

@thorellsinspired9593 Yep, should be a red dot at bottom left corner. If it's blue, that is my high jacked channel I will not pay for.

@jutec6254 Are you using BS separator? If so, it (the fuse) is separated at the battery If not, I would think within 12 inches of battery. If you are installing the BS system, I would advise calling their reps. They provide a fantastic support service.

@semzak Both were Duracell lead acid. Don't mix types as it confuses the relay. Stay all lead acid....or AGM or whatever.

@semzak Greetings. I am afraid that question is above my pay grade. If you can, call their techs at 800. 222. 7617, or, email them at Tech.bluesea@OneASG.com. I would hate to give you some bad information and damage your system.

@deanm5325 Hey thanks. I put EVERY negative cable on the bus bar hence the "title" negative bus bar. Bus bars can be negative or positive, they cannot be a combination of both. Sorry if you know that, I just want to be sure. But like I said, I put EVERY negative cable on that bus bar. As I stated in the video, you will probably not have a single terminal for each negative wire or cable so you may have to stack a couple like I did. Check out the wiring diagram. I did have one negative cable that was red because I could not find a cable that was black , long enough , and the correct size. That's why one red cable I put black tape on the connecting end about a foot up You will probably not have that situation because that was MY cable going to the 12 VDC fuse box I put under the helm. Take care....tag your cables and make a wiring diagram!!

@@jvkew Great! Hope it helps you out.

@jeffdavis2026 I checked with Blue Seas and it wouldn't hurt anything, it was about $25 cheaper and I liked the components better...especially the ACR.

@@theoldshooter9011 Ok Thanks For The Reply I was curious if getting the larger amperage ACR would hurt anything . I run a Mercury 250 Optimax puts out 60-65 amps.

@jeffdavis2026 Jeff...I would HIGHLY recommend calling Blue Seas and talking to their reps. They are great guys.

Yes it is secured. As was mentioned you will get 4 screws to go into the plastic truck consol portion. If you make no changes like I did they will work fine. If you do make changes you may have to replace them with longer screws. Just be sure they are not too long and come out the sides of the truck consol.

@@theoldshooter9011 can you show me what these screws looked like? I’ve got a safe I’ve made to fit in my 2017 titan, not sure where to screw in to not hit anything.

@PlasmaRifle40watt First....GO TO YOUR NISSAN DEALER AND ASK THEM WHERE TO PUT SCREWS!!! Second....the screws were about 3/8 inch and COURSE threads. And it v was self tapping. Once you put a screw into plastic you don't keep taking it out and putting it back so I'm afraid I can't b show you the ones I used. Since I raised my safe up higher so my full size weapon would fit it moved the edges further away on one side so I needed just a tad longer screw there. Key...self tapping, course thread, not too long and check with dealer.

Wow!! Thanks for the nice words! Glad you enjoyed it and hope it helped. Note the Red dot by my name. It's my new channel. The channel with the blue dot has been taken over and held for ransom. Won't pay. So check out the vids in the RED channel. Take care.

Lol.... That's great! Please notice under my ID is a RED dot. That's my new channel. I have another channel with a BLUE dot but it's been high jacked, and they want a Ranson. All new vids go under the RED dot. Thanks for the nice words. Hope it helped you.

Great! Super glad it helped. Pls check out the vids under the RED dot as the ones under the blue dot have been hijacked and held for ransom. Thanks again..

Hey, thanks for the nice words! Click on the RED dot by my name name to see other vids I have. My channel with the BLUE dot is being held for ransom and me no pay!! Thanks again and red dot all the way.

Hey thanks for watching. I decided not to mess with the ignition key switch. The reason is I would have probably caused more damage than good. My switch had the wires "hard jelled" in and the potential for me to induce problems and damage was way too high. While you can go into the starter switch, I do not know anyone that did so. When I talked to the BS reps they indicated if I didn't do it the would be no damage. I ran it that way for 3 years and ha no problems.

Sorry Kevin, I had written like 3X a much a response but when I went in to post it i noticed a bunch of incorrect auto corrects and it lost like 2/3 of what I had written. Bottom line, if you mean starter switch, I did nothing to the wires of the starter switch. If you are talking the BS switch, ALL engine wires went on the Engine lug that came from the engine. I would highly recommend calling Blue Seas and talk with Kevin or another rep as they are really good and will take whatever time it takes to answer your questions. THEY are certainly the experts. Again thanks for watching the whole vid and please let me know what you did.

Hate to say this but then it's not hooked correctly. Find the engine wire or cable and hook to engine plug on switch. I've never seen two but you may have two wires from the engine. One for starting and one for trim. If so then both would go to engine lug on switch. Pls keep me informed on what happened. But for sure if hooked correctly trim should not work if switch is OFF. Thanks for watching.

@@theoldshooter9011 its me again so i went back out to the the boat and realised that i have as you said 2 red wires one for engine and one for trim so i did install the trim to the engine side on the switch as you recommended and now when i turn the switch to off position everything is off / could you please give me the info to where you bought the fuses i only have the helm fuse u mention that not too many people used the fuses im one of those people so far only because i dont know where to buy them, but im new to this boating thing. so i have a dumb question what can happen if i dont use the fuses on the batteries will i be at risk of catching on fire in the middle of the lake

@user-mi2sp8dc6p I went to Blue Seas website and got them there. As I pointed out, few actually use them. I did on my big tritoon pontoon but I don't on my 16ft john boat. I am not positive but I think the hazard is to the ACR from over heating. When my HOUSE battery died on my pontoon boat I had to move all the cables to the START battery and I didn't use the fuses on the quick emergency rewire. I ran that for two days and when I got back home from that trip and replaced the HOUSE battery. I reinstalled the fuses. I experienced no overheating in those two days. I know the Blue Seas reps will push the use of the fuse mounts and fuses but I challenge you to find another video that does. I only found ONE other. Glad you got the problem resolved!!

Check real close again. The positive cable to the helm that came with the boat does have a fuse. Might have missed it on the diagram but do point it out when going over cables. Each pos cable from the bettery. To the ACR also has a fuse. Blue Seas will really push the fuse to the ACR but reality is few use it.

Hey!!!! Been there!!!! Glad it was of help to you. Should get an award for sitting through it.

@@theoldshooter9011 Hahaha! I live on a small island called Grimsay. Maybe you came here?

I sat through the whole video - mind you, I had a bottle of Glenmorangie standing by for sustenance and support! 😁

@@rhodevans6523 Im not sure where in detail. It was way back in the mid 1980s. I sure wish I could help you with that bottle but just got diagnosed with liver cancer my collection of single malt dual casks are pretty moot right now.

@@theoldshooter9011 Sorry to hear that man. Hope you'll be out on your boat again soon...

Terry... if that channel had a blue dot in left corner it is a dead channel that was taken over for ransom and I won't pay. Find my channel with the RED dot. It has all my vids on it. Thanks for watching.

Oh, I forgot.....Amazon has a bunch of different Airborne T shirts. Just ordered some new ones myself. And, if you click on the Red Dot with the T in it next to my name you will find my new channel where I am putting all new vids. Take care.

Hey, glad you liked the video. I might give that thing with the ears a try. I am in the process of selling my pontoon boat. I am just too old to take proper care of it. I really hate selling it but such is life. If you know anyone who is interested in a tritoon with less than 50 hours and a ton of extras please let me know !! Good luck with your project.

Lol...I dont know about that but I hope you enjoyed the video. I have a few others on THIS channel that are pretty informative especially if you would like to build a pizza oven. I had another channel but it was recently taken over and is being held for ransom that I wont pay. So this is the channel I consider active. Again, thanks for watching.

@@theoldshooter9011 great video man. Im just about to do same battery project like this. Its like movie. Two hours of watching you with grand finale at the end. Well done

That's what my wife says!