Видео

How do you like that new fox 36? i just ordered 1and im also taking off a 35 gold after 3 years.

It looks like you took off SM-RT66 rotors which are already compatible with metallic pads. Couldn’t you have just swapped pads?

Lopez Gary Moore Michelle Jones Matthew

Hi Mike. Can you give the reference of the seals please ? Thx.

Great tutorial!

why are you not using 126 Tooth?

Tje fact this is supposed to be done every 50 hours is a ball ache

got the helmet. Not mentioned in your video is that the dial adjustment carriage has 5 points of adjustment. The who dial carriage has a center attachment that can be moved (2 positions) . The attachment uses the same click in and out as the cheek pieces. The the carriage is attached on both side areas. These have 3 points of adjustment to make the helmet bigger or smaller. It comes in the center position of the three positions. Last, make sure the cheek pads are on the correct side. If reversed, they will get on your ears.

Jackson Mary Robinson Kevin Moore Sarah

I recently purchased my first ebike, the Merida E-ONE Sixty 500, it comes with this fork. I will lower my expectations, as long as it works and lasts, for now it is enough, in about 4 more years I will see if it is worth upgrading. I hope it is the 2022 version and does not have the problems of the previous version.

Ur doing it wrong buddy. Use a garbage can. Use soapy water. Use a cushcore dildo lever.

White Mark Miller Patricia Davis Betty

Why doesnt spinning freely... It looks like stuck.. They said that they git 3 bearings on it

im planning on getting a Drag Shift 7.1 with that fork,do u have any opinion for that bike?

I replaced my 30t chain ring on my Sram X01 crank. Drive side 8mm extractor bolt like your crank. When installing the crank and applying 54nm of torque, the crank will not move! Any suggestions?

Does the rebound damping adjustor actually click on your RockShox 35 Gold fork? Mine (on a new bike) does not, so I'm trying to figure out if it is faulty or they were just too cheap to include clicks. (I posted this comment previously but it didn't appear.)

Brown Sandra Gonzalez Lisa Hall Steven

Wilson Brian Miller Patricia Hall Steven

Looks great Dawn!

GX is very good. Very reliable. I’ve owned GX, X01, and XX1. The latter 2 have a more pronounced tactile feel on clicks but really, GX is more than good enough.

its easy after the firsrt try

Ehm ... you advised to clean the calipers/pistons in the caliper with oil. And you didnt advise to clean the calipers and the pistons with a brake cleaner afterwards. I'd correct that part if i were you. The oil part is completely unneccessary and life/limb/bone-dangerous. Just use a proper, inexpensive brake cleaner.

nice video and nice bike!!! how much do you weight? and do you have some token inside? thanks.

Hello. Thanks for a great video. I have a question. Is there a fork that would work or feel a decent amount better and still be somewhat affordable? I have a Roscoe 9 hardtail.

I this a trance x or normal trance?

great tutorial, im going to try this for the first time this weekend. Ive bought an X01 shifter

Thanks for making the video. Really helpful 👍🏻

Thanks!

They make some really awesome and not much more expensive than regular C clip pliers that ratchet down and make it so you don't have to hold the tension on them when installing you just squeeze it down and it holds itself. Getting the back of the clip started first then working to the ends of the clip also helps. Another trick is to use a socket that goes over the shaft and inside the tube and use it to tap the seal back enough to show the C clip groove fully. Just some tricks from a heavy equipment mechanic.

Thank you!

Mike, Thanks for the demonstration! Where did you get the new gaskets and lubes?

Please for the love of God, leave out the music, totally ruins and makes it unwatchable

Thanks mate, just put in a GX shifter myself. So much better than my NX. Good tutorial. 👍🏼

Good job! and thanks for the lovely video!

Next time hit the Chute after the jump line on Millstone! It's off the zero trail.

7:13 for pedals I heard the easiest way to remember is just tighten by turning up and toward the front of the bike regardless of the side of the bike. Turn up and to the tail of the bike to loosen.

Before the incident almost a year ago this seemed to be one of the safest places in the US. Doesn’t feel that way anymore.

Pedepress ?😮

Pedal press more control bicker fork me😅

Awesome video, I am upgrading my ebike from 203 to 220 and this video helped a lot.

I love the birds in the background. Thanks for the video, great content.

I have 32mm inner rims and when I got 32mm tape it didn’t cover the entire thing because the rim dips down a little in the center so I had to get 32mm tape in order to cover it up completely

what's the location of the best trail head

back sound is to loud

Just found your channel, actually was looking for info to service the Rockshox 35 gold that came on my Giant Trance. I am a Giant fan (pun intended) I couldn't agree more about your views on Giant and the Trance models, they are wonderful bikes. I have a different model the Trance X 29 3 but had the two same issues. I broke the SX derailleur, very soon after purchasing it when a small twig broke the plastic ripping it off my bike, which I replaced with NX and have had no issues for a couple years now. The next weak points are the shock and fork since I have the lowest level 3 build. But I have ridden it with them for years and the bike is still very capable, local trail riding to Snowshoe bike park. My sons started with 2019 27.5 aluminum Trances and loved them. Sadly, they were stolen but we liked the Trances so much and they each got 2022 27.5 Trance X 1. Still aluminum but with upgraded suspensions, Fox 36 Grip2 160 and Fox Float X 145 shocks. The improved suspension makes the bike that was so good even better. Made me realize how bad my shock is and that at a minimum I need to see if I could improve it, anyway great channel keep posting, looks like you have a bunch of great videos I need to check out.

Я из России, купил себе в апреле этого года Rock Shox 35 Gold с ходом вилки 140mm , не вздумайте лить масло в демфер 5w, на такой вязкости эта вилка не регулируется это просто ужас какой-то , молотит в одном положении отскок ,нериально отрегулировать нормально отскок, залил масло синтетику 15w вязкостью и о Боже вилка начала работать как надо))

Oh 😱 sorry man... Injuries are the worst bummer in this sport. I broke my radius June 2023 I had surgery 21th of july, August I was back on the bike but last march I crashed into a guy at the pump track now my hip won't stop hurting. Part of the game apparently 😅

The weirdest thing about that steel chainring is that mine rounded quite fast, I replaced it with a 7075 aluminium 30t goldix chinese chainring and it's still perfectly sharp with about double the distances on it. Steel shouldn't wear that fast 🤔 *I did clean the threads and put red locktite, when I removed the stock chainring it was the same as the GX cranks I have there's a drop on each screw. Idk if I did wrong or not we'll see next replacement 😅

my rockshox gold rl 130mm can i extent it 160mm?

Does it come with a sleeve for the cable or just the bare cable?