Видео

I recently spilled water on my superlight and first the scroll wheel was broken. Now the whole mouse can’t even turn on, help needed. Thanks in advance

just fixed my Logitech G PRO X Superlight mouse (faulty scroll wheel, what else) only thanks to you, god bless you 😇

Great video

what do i do if the red and black wires they were soldered to the metal but they BOTH just poped off so do i put them back on with hot glue but i think that will be bad for wires and mess the whole sistem up and i dont have soldering iron

That scroll wheel spring cost me 3$😐

swapped the poti with a different one works perfectly :)

where i can find button switches?

can i also swap out the middle mouse button?

um thats not silent thats still loud to me :/ silent used to be no sound at all and i had one thats why im saying this

Is this full size aqua Verizon for hyperx alloy origins is this good for long term for many years longevity and color black and tactile aqua

it took me an hour.... Why?? Greasy food x no magnetized tip = good luck buck-o..

Spilled coffee all over my table by accident. G Pro stopped working shortly after. This video helped me get it open and with a little rubbing alcohol and q tips, the mouse is brand new!

Nice video but how tf you put the pad back on.... you gotta buy replacement?!

Hi! Did same process along your tutorial, all is fine and now my mice is alive

spilled coffe on my mouse this morning and it was bugging. thanks to your video i was able to open it up and clean the mouse from inside :) thank you a lot! Mouse works flawlessly now! even the Mousewheel started working again :D

can you please mine too?

my glorious model o has died two days ago because i sprayed it with something called CRC electronic cleaner i just sprayed the shell top and the bottom and the only thing that is working on my mouse right now is the buttons the sensor is not working any help will be appreciated and no it's not about that firmware problem :/ i tried it. Didn't work

my glorious model o has died two days ago because i sprayed it with something called CRC electronic cleaner i just sprayed the shell top and the bottom and the only thing that is working on my mouse right now is the buttons the sensor is not working any help will be appreciated

so my options are take it to a professional for cleaning, or get fucked.

Used this guide to replace the mouse switches- turns out you don't need to fully disassemble it to do that, just taking it apart and prodding the battery out is enough to get at all the screws you need. Thank you so much for the guide! solder wick and low melt solder worked perfectly for desoldering the mouse switches as well.

support is ignoring me after many attempts after my broken superlight 2 arrived

Scroll wheel works perfectly again after cleaning. Awesome video!

Anyone has a super light that has a bottom plate with no screws?

Your camera is set wrong. You sould had set the camera directly above,

Hi, where do you bought de skates?.

Hi thanks for the video, do you have the links for the encoder and switches ?

magic !!

How can i replace the middle mouse button, mine doesn't click anymore. Is there a kit where i can get all three?

y como le ponen los deslizantes despues?

The fact you sped thru the first five minutes of the deconstruct is insane. Fuck me if i needed any information from there.

very CLEAN guide

hey when i put down these slide pads can use it again because i lost 1 of them what was in the packcage, so can i put old slide pads again on mouse? and they will hold perfectly?

Thanks for the video, beware when unscrewing and screwing back the two buttons, the magnets on the sides will attract the littles screws making the operation quite a pain

Bro my mouse button fell into my mouse 😂 Wish me luck

Why would the screws be underneath the glides? Now I need to ruin my glass skates just to open it...

for those of you who's mouse wheel is scrolling the wrong way. i didn't want to take the skates off because they're too malleable would only last 1-2 cycles of disassembly, so i dumped the highest percentage isopropyl alcohol into the frame, shook it around, mashed and scrolled the wheel in the process, and dried it out with compressed air. fixed the issue without the need for disassembly

the big screws were tightened beyond comprehension and one is stripped

Thank you for this video! I know it's been quite a few years since you posted this but I wanted to express my thanks. I was cleaning my mouse when the loose spring near the scroll wheel came out and I had no idea where it came from. Your video helped me figure out where and how it was positioned. Thank you again!

awesome, fixed my scroll wheel issue

Mine is currently having a problem where its charging but kind of not turning on. Like earlier it was working again and then it stopped working again but it still charges and i can see thr loght from the sensor when i turn it on .... Idk what to do anymore

I know it was three years ago but how do you stick the battery back on?

i solder it below the pcb.. i dont need to risk dmging my pcb :( because i dont know where to get the replacement

I'm 12 but I want to do this is it easy to ruin my mouse

Had the ribbon cable door at 1:05 come off completely. It doesn't seem broken or snapped anywhere, is it able to be reconnected?

wow! I wonder if i can do this with my np01s. hmm..

Could you tell me what replacement switches you used? ty

That was awesome to see you work. Learned quite a few tips in Lightroom Classic from your methods. Can't wait for more streams and more learning! Please, actual photography stream might be awesome!

The amount of effort you put into this is phenomenal. The results really do speak for themselves. I appreciate you doing this on stream, I have no idea really how to do any of this stuff and your commentary is really useful as a reference point for later searches

Stream starts at 04:58 🫡

Sorry I missed the live, but definitely will be watching this thoroughly to like up all the knowledge and tips. 🙏🔥