Видео

The Nova Plus has definitely gotten my attention! I’m waiting for some more content to be posted before I make the purchase.

Thanks folks - sorry I missed it - verry excited about the new Nova PLUS!

where do i find a video with the details

i have reseted my engraver and now my axes are messed up, when i go up it goes down when i go left it goes right. my 0 is at the bottom right but originally it was top left (where the capters are). i have reseted my engraver because it don't remember where zero is so it hits the metal at the top left sometimes. Everything is messed up now :( (myengraver size is 70cm x 50cm) If someone can help :(

So nobody sent my quote on an aurora so I bought a SFX with a JPT. You lose

will the bolt do the same?

Most use JTP or Raycus. This is a Hans? Never heard of it.

Hello question does the Kerf change with more or less power? Also what is the best way to measure kerf i have seen people cut a 1x1 square and use digital calipers to see the true cut do you find this accurate and the best way? Thanks

Hello! On my machine, if I select on or off it makes no difference, the pump sends the same amount of air.... what could be the cause? I have the biggest model of aquarium pump for air assist and I think it has just one speed... On the solenoid, if I try to reduce air debit by the screw on the top it gives lower debit on both on or off. I think I am slowly going insane with this. Thank you!

You are the owner and president?? Well done Clay, you look like a bloke you'd love to have as a neighbour and have a beer with. Not the president of Thunder Lasers.

Do these values change when you install a new tube?

Hi How much this Where i can get this. I stay in UAE (Dubai) Let me know. Thank you

since its lack of showing alingment and how to turn laser dot to position i call it shit video.

Looks good, Clay -- another product idea for me to play with for my store. Thanks, and Merry Christmas to you and the Thunder folks.

Hello Clay, I hope you are well, and thank you for all these videos, I have been learning although I don't have my laser yet, I am a few days away from buying it, I would like to know why you don't give any gifts when purchasing your machines, I am buying the Nova63 130w with almost all its accessories, except the rotor. Would you be able to give it as a gift? It would be great to receive a gift buying your largest and most powerful machine, I hope it is the first of many more. I was going to buy with Aeon laser but I'm not going to wait 3 to 6 months for them to send it, they gave me a laser Gabo for free, when will I buy the laser, after the Trustpilot reviews, I definitely decided to go on your brand

Hello Clay, I hope you are well, and thank you for all these videos, I have been learning although I don't have my laser yet, I am a few days away from buying it, I would like to know why you don't give any gifts when purchasing your machines, I am buying the Nova63 130w with almost all its accessories, except the rotor. Would you be able to give it as a gift? It would be great to receive a gift buying your largest and most powerful machine, I hope it is the first of many more. I was going to buy with Aeon laser but I'm not going to wait 3 to 6 months for them to send it, they gave me a laser Gabo for free, when will I buy the laser, after the Trustpilot reviews, I definitely decided to go on your brand

Here is the link to Cuttle: cuttle.xyz/thunder

What is the black spray on metal?

I own an Omtech 80w CO2 ($$ in 2022) now I’m using it more frequently in 24’ for my side biz. I am definitely noticing that when it comes to cutting full 1/4 in sheets of MDF (ornaments various images) it doesn’t seem to cut fully through for all of them. I spend too much time recalibrating every time I do the same type of job. Looking at thunder and aeon, for second machine in shop

love it, could you share the settings for the nova 63 130w please?

Love it, could you share the settings for the Nova 63 130w, please?

So glad you all talked about the precision of engraving on the 130W. I am definitely one of those people that have been debating that before I make my purchase! Thanks Sallie!

I find LA Awesome leaves quite a lot of streaks (you can even see it in the video). Any suggestions for that?

Can these lasers cut wood or is it more for marking?

I have watched this video five times and have followed your instructions EXACTLY. I have two baseballs I'm trying to do this with. It will either completely erase the outline of one baseball or the other. It WILL NOT do what you're able to do and hide just the overlapping part. I've been working on this for over an hour. I'm extremely frustrated.

What machine is this Nova 63? 100w or 130w?

My wife and I truly enjoy watching Sallie’s channel. She’s extremely informative. We’re actively shopping for a new laser as we speak. We’re upgrading from a diode laser and planning on starting our business. Thunder is at the top of our list!

That’s so true… buy your second laser first. Being new to lasers I’m almost got a CO2 but instead I goy a diode. My next one will be a Thunder laser for sure.

Love watching your channel Sallie

Would you be kind enough to stop recording your videos in HDR mode? Its really annoying to watch on my Samsung phones as there's no way to disable this forced feature.

Does anyone on your team speak Spanish? I want to buy one of your machines, I was about to buy with Aeon Laser but after seeing the reviews I want to know more about your laser machines, it would be great if I could talk to someone in Spanish, is there someone who can help me?

I have a 51/130 that flipped off the liftgate and landed on its back. The tube didn’t break but I replaced most of the same metal parts that you are going to replace on this one in about 4 hours, fired it up and it’s been running strong on a daily basis and I never had to adjust any belts or the bed or anything. To say these things are built like tanks is an understatement.

❤❤❤❤❤❤❤

Do you have a RUclips channel. I would like to see what you guys do in your business.

Support is absolutely 🙌🏾 down the best

Nice, what are you using for the ‘clean’ step? A sander?

Great Lasers + Great Support = AWESOME PURCHASE!

Which machine/s do you have? Which one did you get first?

Can it heat a hotdog?

If that's a super laser what does that make my 10000kw laser I've got?

Clay, these project videos of what the Bolt can do are so impressive to me. Not necessarily for their ideas or usefulness, but for your commitment to your company and lasers. Being 69 years old, I am so impressed that the "owner & president" takes time to demonstrate his stuff. It's like they make me feel like a part of the family. Having just sold my Omtech Polar which I never even used - too many "add ons" to get it useable, and now we are moving from Ohio to Florida, so I went ahead and sold it to a friend. I will probably buy another laser like the Bolt here in the next few weeks, after we get settled in Florida. And the Bolt and OneLaser XRF are the top contenders. Thanks, Charlie in Central Ohio, but soon to be Central Florida !!

What is that material?

Absolutely love Katie!!

I like to make stuff so this would be cool

How many bars air you are using?!

Thanks!

I was looking at the basic Bolt, but it sounds like you are saying it won't cut? If it does, can you tell me the maximum thickness in a single pass (various materials)?

Would love a free code for cuttle. Also what kind of spray glue do you recommend?

What is your email address to send a request for a cuttlebug code?

Would love a code for a free trial