Видео

Super video, thanks!

I own a set of folding t set. It's not unlike a set of folding Allen wrenches. I gives you a little tork because of the fold. Nice set, I believe about 20 bucks

Does anyone know if this works for the 2000 I was told my problem is the steering wheel position sensor thanks in advance

So I got a Christmas tree of lights like three of them I guess this is the problem?

I've always wondered why there is a complaint that the EBCM on C5 Corvettes up to the year 2000 is not repairable. Mine is 1999 and I have repaired the EBCM module myself and it has worked for the last 5 years without any problems. So I did something right.

Just listened to a quy about haw hard ebcm for c5 are to find. He said nothing about repair. Thanks for the info. I have a 99 with 200000 miles on it.

You're really slow at getting to the point but hopefully this will work on mine.

I have a 2000 C5 and the Service Traction Control/ABS? Service Active Handling light went on and stayed on. I called my mechanic and he will take a look at it but he said if it's the module that you can't find them for the earlier models. He knows my car is a 2000 so I assume he meant 1997 to 2001 as earlier models. If it ends up being the module do you know where I can find them?

I took my entire dashboard off to fix the gauge cluster via soldering on my Prius once. WELL worth it ! Save me $1200 and a month without the car.

Isn’t this solution only for 2002 to 2004?

Hey! Great video, super informative! I was wondering, what year is your vette? From my research the repair can’t be done on 97-2000 but it CAN be done on 2001-04. Was wondering if you’ve heard of this or in your experience you can fix it on any of them? Thanks!!

I sure wish this would work my 2000 C5; but, every dealer and online site has said if you have a 2000 with traction control issues you’re SOL! Part is no longer available and the tricks to fix the control assembly don’t work on the 2000 model. My “repair” was to remove the dash and pull out all the indicator bulbs for the traction control.

This is for a 2001 and up c5 not the 1997-2000 as they have a different EBCM I was told. The 97-2000 can’t be rebuilt or fixed.

I'll leave mine alone. If I try to mess with it I'll really screw it up

What watt soldering iron are you using?

Does this work on the 97-2000, ive been told those are unrepairable?

What yr model did you do this on? Did it have the Bosch unit?

Im a new c5 owner and I was going 75mph on the highway a couple weekends ago. All of a sudden my back end felt like it got loose and my DIC was reading “service active handling soon”. Would this fix that issue? It was pretty scary

THIS ONLY WORKS ON 2001-2004 VETTES

Watch the video, it’s great, and read many reviews but I’m left wondering if while separating the pieces is there anything that can be disturbed or fall out we should be concerned about. Thank you for the video, I’ve gotten the screws out and preparing for separation now. Thanks

What year vette did the ebcm come out off, i have a 99.

One suggestion I would make when doing the pullout of the EBCM unit is to get the front end of the car up on ramps if possible. The hardest part of this fix is the bending over trying to get to the hex screws on the unit. Lift her up several inches and your back will thank you and the job will go faster.

I have a 1998 and have same issue my question is if my is the same than the one you fix on the video or is diferent thank you.

Great video! Loved your enthusiastic “the lights off!”. I know that feeling!

You were able to test it without remounting.? I have a 1998 C5 Vett. module been disconnected to allow me to still drive. I'm ready after watching your video get it fixed Thanks for your information. I'm going to tag your site for possible future issues. I plan on keeping the car.

Just did our o3 deville dash had 3 lites abs brake trac control,engine...splitting the module was tough ,then tapping,and used the bolt to finally pop it open,resoldered ,then silicone ,and really tight to get at,...but sucess its fixed

I was really worries about getting a 97-2000 corvette because i heard they dont make this part anymore and its super expensive to fix but after watching this video i think i can still get 97-2000 corvette because all i was looking at was 2001-2002.

Why did you come to the conclusion that this part was failing?

Here i am , just prepping myself to buy a c5 next fall.

Awesome Teaching!

What year is your corvette?

If you have this problem. What problem, you do not say.

My EBCM lights came on several weeks ago. Happened once before but recovered after a restart an hour later...then fine for a year. Now went out and I was planning to fix per this video. But after 3 weeks it cured itself and has been OK for a month so far. I'll wait until a permanent failure. That is my message...wait a long while before attempting to fix it. Nothing gets damaged by waiting.

I have 98 c5 mine is located in the rear

Thank you for the video. My question is what year is your C5? They are saying that the 1997-2000 C5 EBCM can not be serviced or fixed? Is that true? Thank you

Just put visegrips on the torx screwdriver.

I am having a problem with those lights on. The 2002 Corvette have a problem when pushing full throttle after a bit and some soeed then it continues ok.

Only for 2001 and later C5s. Not 97-2000. He should have said what years.

I am really happy for you 🎉 I which to can do the same. Good luck.

Do you know what codes you had prior? I’m rocking a c1217

Mine actually has to be drove, idk if 5 mph is the digit or what . I definitely am gonna do this and see if it fixes the issue! Thank you!

I didn't hear the year of your C5 Corvette. The reason I ask is that there are two EBCM that are used, a Gen 1 from 1997 to 2000 and a Gen 2 from 2001 to 2004. Apparently the Gen 1 is hard to find and hard to repair, but maybe this is all that is involved in the repair.

Thanks for the info. I just bought my first Corvette. 2003 50th anniversary from a private party. Next day abs and traction control lights came on. Might try to tackle this. Never really soldered before. Wish me luck.

Will this work for a 2000?

What year is the C5 in this video?

What you are seeing is residue from the alcohol bath the circuit boards went through in the manufacturing process NOT water. The yellow is flux. If by some miracle you made a faulty unit work by reflowing the solder, it is pure luck. This is not a real fix.

Great video

Now let's see you do one from a 97-00 C5 please.

Great video … thanks

Would this work on a 1999 C5? I hear those are the 1st gen EBCM and not repairable.