- Видео 2
- Просмотров 257 234
mlaulun
Добавлен 29 мар 2011
Видео
Commercial Flushometer Toilet Repair
Просмотров 257 тыс.12 лет назад
Do you have a commercial ("aquaflush") toilet that won't stop flushing? Here is a simple fix to try. BE CAREFUL not to enlarge the size of the "weep hole" in the gasket. If you do, the toilet will not flush long enough to clean the bowl. You want to find a VERY small guage wire to clean the port.
No heve super pat how to rectify
Cantiniv water leak how to rectify
The small hole lets the water back in on top of the diaphragm to push the valve back down and seal it. If the hole is clogged the water keeps the valve stuck open.
I was hoping to see this!! flushomatic!!
Thanks this is helpful
I have one of these toilets in my apartment, and it wouldn't stop flushing at 1:30 AM. You saved me an enormous amount of hassle. Thank you! The amount of times the internet has taught me simple plumbing and electrical fixes...
Thanks a lot
This video really came thru in a came through on the clutch! Learned how to stop water from running and it was a great temporary fix. Thanks!
This is a great product and without the remote, which adds considerable cost, is a great deal allmy.tips/TOTO-Tseat You don't need the model with a remote. It's as good as any stand alone bidet which we have had. Very easy to install and use; it should be installed on a Toto toilet. One thing most people don't like, which I agree with, it looks like a handicap toilet when installed! But, once you get by the looks it's great!
There is no remote
Thank you! This was very helpful and fixed the problem!
I know this is an old video but I was wondering if this would help a toilet with a weak flush
Check the stop and make sure it's not partially closed. You can get a full rebuild kit Part# P6000-ecr-ws1-rk for a zurn flush valve for $20 to $40 depending on where you go. Well worth the money and they are easy to replace. If you buy just the diaphragm from Sloan it's $20.
Awesome work!! First thing to remember guys, wear gloves!!!
New to commercial plumbing, new job and this Video showed me exactly how to fix my issue. Saved the day!
Thank you bro, it helped me a lot, I really appreciate it
Thank you so much, that was exactly what i needed to do for my toilet to work properly again
Just sell them rebuild kit install
Hi sir u have same vods please give me ok and thanks
I had this happen once and my landlord took a cloth covered brick and gave the top metal part a good bang and it stopped. Now after watching this video I bet the impact of the brick knocked whatever was blocking the whole free. LOL
When do you use 1.6 or 3.5 gpf diaphrams to repair toilets if it is not labeled on the toilet?
You're a gentleman for making this video. Thanks much, all fixed (fingers crossed that it is, anyway).
Thanks for this video, really helped me out!
great info...
Cleaning is good, but replacing the flushometer is better if you can. I'd also highly recommend a spud wrench if you're going to be wrenching on chrome brass. One of my coworkers uses pipe and channel lock pliers habitually on that stuff. As you might guess, a lot of our Sloan valves look like shit and very unprofessional.
thanks for the video. It help me out.
Thanks so VERY much for this post. I was able to avoid calling in the professional for what is really a minor maintenance issue.
I have a leak coming from that area, do you know what the reason might be?
David Taveras Depends on where. It may very well be a seal OR the vacuum breaker. Often times those seals become dry rotten and hard. Once they get disturbed, they don't seal very well. This can have a domino effect where you replace the flushometer, but the torque loosens up an o-ring. Replace a vacuum breaker and you end up having to replace the o-ring above the spud. Hope that helps!
Thanks! I was able to use your video to fix my own toilet quickly and easily! No need to call the super!!
My tankless toilet is similar to this one in video. nowadays, its water level up and down than stay in a low level, then after 2week or so the water level up to the normal line. I don't know what 's the problem. anyone of you can give me some leads to fix it. toilet is good no leak no crack. work perfectly well
Could be a slow drain OR the flushometer is going bad. As far as I know, you cannot adjust the water level of your toilet bowl. I have a funny story to complement this comment, BUT making a guess off little info I'd say the toilet may have been draining slower at some point.
Dude, thanks for this. Definitely needed it
Thank you. Saved me
Yes, this works. I've found with most of these sloan type of fittings, that cleaning everything and putting it back together fixes most issues. Thanks for this informative video. You missed out on the part where you go over to the sink and clean it out and use several paper towels to wipe it all clean. Ha ha! Also you forgot to show how elated you are when it works and you feel like a real bonafide plumber. I can't spell bonafied well.
this guy is clueless. The by-pass whole should not be enlarged as it will close the valve off quicker. You just need to buy a new diaphragm kit. DO NOT enlarge the by-pass
I cannot get the top off. It takes a large wrench. I wish you had shown actually unscrewing it with your wrench. It's hard to tell if the wrench even fits. Mine looks like it's never been touched and plumbers have repaired it before several times. I went to the hardware store to get a larger wrench but still can't get it off. I will go back and try to get one similar to the one you are using.
I am having this exact problem right now and have called plumbers in the past. I will try this. Thank you!
Worked great! Thanks for the post!
Awesome video. Thank you very much - very informative!
THANK YOU SO MUCH!!! I was 2 hours trying to figure out how to fix this lol
Thank you for this video, appreciate it. Saved my ass just being able to find the shut off valve
Saved my ass at work thanks
A couple of days ago at work, had one of these do exactly what you described, that it kept running and wouldn't shut off. Dratted thing roared like Niagara until I could get someone over who could shut if off as we custodians didn't have access to any tools to do it ourselves. Went to a store the following day to get a stubby screwdriver to keep on hand just for this moment the next time it happens.
thanks
Thanks!! ;-)
thanks, I can fix one at work now
Thank you for this video!!!! You saved me tonight!
THANK YOU SO MUCH! Your video was awesome. You explained things so well and concisely. This has happened to a few different toilets in my apartment complex and now we know what to do!
Thanks for the video fixed my problem!!!
yes thank you I've been trying things for like 45 minutes now
buenisimo man
plumber=$160.00 vs minimum wage worker and RUclips=$10.00 Thanks!!!!
Thanks for posting this. It fixed the problem!