- Видео 75
- Просмотров 13 220
CyBerJak2k
Великобритания
Добавлен 23 июн 2006
Welcome to my 3D Printing Channel.
Occasionally my personal views and opinions on 3D Printing materials , hardware , upgrades and things I think are useful to others. But also time-lapse videos and images of things I make.
Hope you enjoy it and maybe even get inspired to do #3DPrinting as well
Occasionally my personal views and opinions on 3D Printing materials , hardware , upgrades and things I think are useful to others. But also time-lapse videos and images of things I make.
Hope you enjoy it and maybe even get inspired to do #3DPrinting as well
Super Print V6 Volcano hot end assembly
First apologies, for reposting this after removing the previous. And a big thank you to one of my followers @TechieNI for pointing out that the audio track was messed up after 9 minutes with a second audio. So here we go again!
This is an assembly of the Super Print V6 Volcano hot end. and how to correctly tension the nozzle to the throat so as to get a good seal and no leaks. This does apply to all metal hot ends in that regard.
I hope you find this useful, And if you want One of these hot ends yourself or other ones that they do
This is the kit I have which is just the hot end as I already had a heater , thermistor and fans.
But they have more varieties for those that need it.
Amazon UK: a...
This is an assembly of the Super Print V6 Volcano hot end. and how to correctly tension the nozzle to the throat so as to get a good seal and no leaks. This does apply to all metal hot ends in that regard.
I hope you find this useful, And if you want One of these hot ends yourself or other ones that they do
This is the kit I have which is just the hot end as I already had a heater , thermistor and fans.
But they have more varieties for those that need it.
Amazon UK: a...
Просмотров: 15
Видео
The Kidoodle3D MiniBox A1 3D Printer initial review.
Просмотров 97День назад
Hi everyone, and first thank you for watching. This Is a really exciting product to me, and I am very thankful to be one of the makers that have been sent one to look at over give it a run through and give my opinion. First I must say I'm rather impressed with this little machine. Is it going to stand up again a big printer? Maybe in some cases, but not all. This printer clearly had a child in ...
Sunlu Filament Connector different materials and more
Просмотров 25114 дней назад
I finally got this finished apologies for it taking so long. I have tried to test the @SUNLU Filament connector with as many of the typical materials most will use and 1 or 2 that are more technical materials. after having the failure to join PA12-CF I am going to try some other temperature and even brand to see if it was either of those as a cause for the failure to join it. here's the link fo...
SUNLU Filament Connector and PLA+ 2.0
Просмотров 55021 день назад
Hi everyone! Just a quick test of the NEW @SUNLU Filament Connector using some of the New PLA 2.0. I've tried a number of different filament connecting methods from the cheap metal tool to the DIY printable tools in a number of ways and none were as easy as this. I will be testing further filament types from PLA right up to nylon to see how well it does but I'm expecting good results so far wit...
Bigtreetech Eddy USB review
Просмотров 224Месяц назад
This is my personal review of the Bigtreetech Eddy USB version. As it became recently available in the UK during one of the sales on Amazon UK, there was an opportunity. Overall I'm rather impressed on how well it works. I know there are still some software niggles to be worked out by both the Klipper development team, but as well Bigtreetech. But as it stands at the moment it is functional. do...
Eryone Filament Dryer Snail
Просмотров 165Месяц назад
This is a little review of the @Eryone3D Filament Dryer Snail. All in all it is a simple functional drive box with what most will see as a reasonable price. As I said in the video I'm not going to quote correct pricings because sales seem to be on the rise and it might go even lower or go back to its original price but it's normal price from what I've seen is reasonable for the capabilities tha...
Eryone ER-20 unboxing, build, thoughts and observations
Просмотров 111Месяц назад
First I'll say a big thank you to @Eryone3D as this printer was sent to me as a gift, as part of their 6th year anniversary. I didn't have any obligation to do this video but after reading up a little bit about it before opening the box I thought this might be interesting and since I found that they are still on the market I figured others that have been seeing them might be interested. It is a...
Using Kapton Tape to smooth spool feed
Просмотров 4772 месяца назад
Using Kapton Tape to smooth spool feed
Creality Space Pi filament dryer Pt2
Просмотров 2553 месяца назад
Creality Space Pi filament dryer Pt2
Creality Space Pi Filament Dryer Pt1 Initial opinion
Просмотров 9423 месяца назад
Creality Space Pi Filament Dryer Pt1 Initial opinion
How to add pattern to your prints using infill pattern
Просмотров 533 месяца назад
How to add pattern to your prints using infill pattern
LuBan3d, Cutting mesh into printable parts
Просмотров 573 месяца назад
LuBan3d, Cutting mesh into printable parts
FYSETC M36HUB won during @fysetc4882 live event
Просмотров 1044 месяца назад
FYSETC M36HUB won during @fysetc4882 live event
My @fysetc4882 Products (Expanded edition)
Просмотров 474 месяца назад
My @fysetc4882 Products (Expanded edition)
My FYSETC Prusa I3, MMU2 , and Air purifier
Просмотров 1044 месяца назад
My FYSETC Prusa I3, MMU2 , and Air purifier
I won the LDO Motors Smart Orbiter V3! (unboxing)
Просмотров 5995 месяцев назад
I won the LDO Motors Smart Orbiter V3! (unboxing)
The Kidoodle3D MiniBox A1 printing a Dragon Keychain by MESHMAHEM. And finally slicing a model with the Kidoodle slicer. this was almost scary only because I'm used to a much more complex set of settings and tunings but this was just Easily Simple! The model was only available free for a limited time at #Meshmahem 's #Thangs page here: thangs.com/designer/Mesh%20Mayhem/3d-model/Articulated%20Unicorn%20Dragon%20Keychain%20Print-in-Place-1089713 Time estimated by the slicer was off but it was still very fast. Just under an hour for this print! anyway more to come as I explore how this thing works and formulate a more broad insight to it for more information about this printer as well go here Https://www.kidoodle3d.com #Kidoodle3d #MiniBoxA1 #Thangs #Meshmahem #3dprintingUK #madeforkids #3dprintingforkids #highspeed #fast3dprinting
Does it remember the last setting after power off? Does it turn off after a time?
So far yes to the settings but will be diving into this deeper tomorrow. As for turning off not sure yet. But I'll add it to the list of things to check
Thank you got making this video. Great to see the mistakes I might make.
Nice demo. i ordered one, if just to use up the 10-12 spools that have about 30ft left on them. enjoyed the video
Thanks! And yea I do things like this more to hopefully inspire others
This is the Door stop I used to try out JAMG HE High speed PLA+ probably not the most optimal but it has sections where it can go up to the speeds like 300 and 350 millimetre per second. Using the temperatureof 230c listed on the box It was able to maintain the flow rate even at the higher speeds when the printer sped up to do those sections. finish was good even with those speeds and the finish model came out really well Good experience from a brand I had not tried before. They are very new to the market and currently only do PETG and PLA Plus but if they keep up this results in the future I can see them expanding to future material types and colours model: www.printables.com/model/626010-vase-mode-door-stop link to filament used: JAMG HE High Speed PLA+ Filament, 50~450mm/s Printing Speed 1kg Hi-Speed PLA Plus Printing Filament 1.75mm ± 0.01 Accuracy 3D Printing Filament Spool for FDM 3D Printers (1000G, Black) amzn.eu/d/00G5C3Ww #crafting #printables #3dprinting #3dprintingUK #pla #jamghefilament #functionalprint
any reason u cant use silicon tubing rather than the ptfe
To be fair I can't see a reason not as long as you check the material properties as there are a few different versions of silicone. Some of it is intended for high temperature and would be safe to do this usage. But there are some that are not so safe even at the low end temperatures with maybe the exception of PCL which I haven't had the pleasure of trying yet. As an example people use high temperature gasket silicone to make socks for hot ends and make replacements for bed springs. In short do your homework on the silicone to make sure it's safe for the high temperatures so that you don't bring harm to yourself. I'd be happy to try some if somebody had a link for some suitable high temperature tubing that had the correct dimensions
@@CyBerJak i use that now with a lighter does a good job and easy to cut away and cheap to replace if u buy in a 5mtr length. Have ordered one of these sunlu joiners so will be interested in trying that out.
@@travelling_hobbit I would be very curious where to get one in this diameter they are roughly 2.1 to 2.2 mm outer diameter with a 1.8 mm inner diameter just to see how well they hold up. as far as cutting them off as you may see in the video I tried a theory that you can after a few moments just slide it off now that's not ideal if you're joining spools But if you have random amounts of say 200 g that might be worth the effort just sliding it down to get one more use out of each one depending on overall cost. I know there will be people that will try it 😂. I'll have a look around in the meantime to see if I can find similar. But just be careful using a lighter that can generate a lot more heat and cause some of the silicone to vaporize
@@travelling_hobbit can you shoot me a link to this, as I've just been doing some lookups and I'm not seeing ones with the right dimentions
First a thank you to JAMG HE for giving me an opportunity to try out their PETG. it actually performed really well even at the 150mm/sec I set the print for. finish was good , and didn't string on me. This lovely dragon chalice I found on printables some time ago seemed to be a good choice to try it with and it really worked well bringing out the detail. links for the material and the model below. Only things I will nit pick on while it lists the temperature range it would be nice to see recommended bed temperature and speeds. The vacuum seal pack was the typical sealed on both ends meaning that once you've opened it you may need to get a dry box storage container or your own vacuum seal bags. hopefully in the future they will upgrade this to Ziploc style that a lot of other companies are using to make them resealable to protect the filament if you don't use it in one go. Other than that It worked really well so if somebody asked about them I could definitely say I had good results. Model: www.printables.com/model/558050-dragon-chalice/comments JAMG HE PETG: 1.75mm PETG Filament 3D Printer (1000g, White) amzn.eu/d/0859cIjz #jamghefilament #petg #3dprintingUK #3dprinting #printables #crafting
Is it possible to bare your bum out of the upstairs windows and then run outside to go and throw stones up at it? Asking for a friend btw
You just had to be the weird one didn't you 😂 I'll catch you in messenger 😂
@@CyBerJak There always 1 isn't there lol. All joking aside. Great video with lots of detail.
I imagine it's not just the pre set temperature that effects the diameter, but also how hard you push the filaments together. I am sure with practice you could get better results.
This is also true they do say press together. Also the captive area for the joint weld is fair sized but this also heats either side of the tube as expected which could allow it to slight swell under pressure. I'm working on testing all the different material types It has presets for as well that are commonly found to be used. So more to come :)
Are the sleeves readily available and cost effective?
@@CarolSuesCreations I asked them and they said they will be available but they haven't given a price on them yet.
@@CyBerJak thanks ordered but changed mind did not see refills it cost. Think wait until amazon has it and refills
@CarolSuesCreations yea I hear ya. I did a 2nd vid I found a backup alternative just in case of out of stocks as welll
SUNLU PLA+ 2.0 This is just a couple of prints using models from the @Sunlu Official website. The hammer, is one of the free models on the page for the material. The other was listed alongside the first on the 11th anniversary page. I will give the link below for the 11th anniversary page as it has both. I did both of these prints at around 250 to 300 mm per second, and it performed really well. I must admit I do like the new spool as well. It definitely feels stronger than the typical PLA+ from them which I am very familiar with as it was one of the first two filament brands I had ever used when I first started. temperatures listed on the spool for the speeds are accurate. retraction settings will be unique to your printer. The colour it's very vibrant for this colour. But it also is a colour that almost hides some of the layer line details meaning that your prints depending on the geometry may have a nicer finish appearance. Link for models: www.sunlu.com/en-gb/collections/sunlu-11th-anniversary-sales Link for PLA+ 2.0: www.sunlu.com/en-gb/products/moq-6kg-pla-2-0-upgraded-pla-pla-plus-3d-printer-filament-1kg
Got some @Eryone3d_Ukofficial Mango Yellow TPU to make some new theme colored feet for the ER-20. according to the page it was Shore 95a. I've had so many times I've seen and even occasionally said myself TPU is best done with a DMG or BMG direct drive. Well best yes but it can be done with a single gear extruder and here's the proof. Printer with the Eryone ER-20 3D Printer 😁 love this TPU as well. printed really smooth. 220c first layer 210c other layers, 50c bed 0.2 layer height 5mm retract retract speed 40mm/s, and 30mm/s print speed. bought here ERYONE TPU Filament 1.75mm, 3D... www.amazon.co.uk/dp/B0CXPVPLRD?ref=ppx_pop_mob_ap_share longer feet model: www.printables.com/model/68213-rubber-tpu-feet-for-the-tefifon-or-other-uses #3dprintingUK #3dprinting #Eryone #TPU #tpufilament
This really cool! Physics
Yes very neat how they defy gravity 😂 love doing these
Great video. Lots of information along the way, might even blow the dust off my one and have another go at it :)
Interesting that yours only came w/ a temp sensor, I have an older model of the same filament dryer & mine came w/ a temp & hygrometer combo
Upon further investigation I've found that the spacers are actually made into each gantry plate. This means the idea if eccentric nuts becomes a tiny bit more involved. And I'll have to rethink the approach.
Finally installed theMintion tech Nozzle Camera. I did notice the LEDs being super bright type cause a little bit of extra heat which should really be dissipated better so I've added a small heat sink with some thermally conductive putty which seems to work very well and keeps the heatsink from popping off. is the same kind of heat sink you find on a stepper driver. maybe later on use them early conductive tape. Made a little box for the PCB which is on printables and as well as MakerWorld now. This is really satisfying watching it after the first layer as well but maybe I'm just weird 😂 links for PCB case: www.printables.com/model/914754-mintion-nozzle-cam-pcb-case makerworld.com/models/498695 #nozzlecam #mintion #1stlayer #zoffset #3dprinting #calibration
Nice~
Glass like dice cube. printed with #techbears transparent PETG with settings by @3dprintingprofessor Link to model and settings: www.printables.com/model/47936-embedded-skull-dice-for-transparent-print #3dprintinguk #3dprinting #petg #glassprint
Hi i see this esun black glow in dark filament but some say its not glow ,maybe this better or how many uv lamp time need to glow and how long visible?
This is actually Eono brand. As for UV light activated I had used a high power UV Beast flashlight but it didn't hold long
Behold Gandalf The Grey. Printed with @Sunlu Official Beige APLA with a little Sunlu gold silk PLA and some @Eryone3d_official HSPLA Navy blue. This model is being donated to the Children's Hospice South West ( chsw.org.uk ) for auction to support the charity. a MASSIVE thanks to Sunlu, Eryone and definitely WICKED from Cults3D for granting me license for 1 print to donate to the charity this model is also available for Personal use for free from cults3d.com/:1257840 auction will be on Facebook at facebook.com/groups/463110999490682/?ref=share #3dprinting #plafilament #childrenshospital #printing #lordoftherings #gandalf #fellowshipofthering #sunlu #eryone
A double tesseract (Hypercube) printed with @fantasyfilamentsuk Transparent Orange PLA object created by taking the single tesseract and putting it down 2x on the bus plate and then turning one 30° model from:cults3d.com/:152241 filament from: 3dfilaments.co.uk/product/fantasy-filaments/#plafilament #3dfilamentsuk #fantasyfilaments #hypercube #torturetest #3dprinting
What an AMAZING Dragon Incense Burner model by Peter Farell on @printablescom Brought to life with filament donated by @Eryone3d_Ukofficial Galaxy Purple PLA. The model will be donated to Children's Hospice South West, Little Harbour auction to support the charity Model: www.printables.com/model/500792-dragon-incense-burner Time-lapse by @Mintiontech Beagle Cam v1 charity: www.chsw.org.uk #3dprintertimelapse #timelapse #klipper #unitedkingdom #3dprint #incenseburner #dragons #eryone #plafilament #charity #childrenshospital
Any idea if it's wcuratet What's your value for a voron 2.4
Accuracy is very good. The thing is this tool is not to tell you what the correct tension is but to help you equalise the belt tension for both belts. If you have one belt that is tighter or looser than the other it can cause skewing of your gantry while it's trying to move. There are many opinions as to what the correct belt tension is. I don't personally believe there is a physical number specific to even the model because minor nuances from one machine to the next due to the person that built it will differ. This is why some guides suggest an audio app that will tell you a frequency to try for. This tool will then once you have one belt to that tension equally make that same tension for your other belt. If you have an actual Voron 2.4 Then you would also use it for your quad Z to make sure all four belts are exactly the same tension. I usually shoot for a bass like note. Tight but not to the point where it makes a mid-range or high note because there will be a lot of tension put on the belt during movement in core XY
As a follow-up to your question as well I believe it was in the video showing what I measured at the time I've made some changes that required me to change it slightly so they now differ a little bit
I bought one, it should arrive this week or next week, I was thinking about plotting some data like the GT2 Belt Tension Meter (RC2) project. Do you think you could make a static belt tension sheet like in RC2? Because by having more than one piece of data, we can convert the data into something more realistic and accurate.
@reubertt there was a video o watched recently done by someone else. It focused on the 2.4 Voron and even gave some specific values based on their tool. All good with the science but I've still found little nuance differences either due to build ability of the maker, parts used in some cases not to official BOM It's kinda like asking someone for their slicer settings and then wondering why they didn't give you the same pristine result that person had.
@@CyBerJak In this case, I was just thinking about the calibration test that they ask you to do on the project's Github. In which a 250mm belt is attached to a fixed location and you add weight (they use pounds, I would prefer kg but it doesn't matter) and this way you can discover the tensioning curve. Their DIY version Github is well-guided. With this device it would be possible to have even more precision, my question is just how accurate it is between models.
An AMAZING vase model from @printablescom made by the author with details of a pillar at Castle Banholf turned into this very detailed vase. Printed with @Eryone3d_official Dual Extrusion Matte Purple/Yellow PLA highlight the fine details of this model. To be donated to the #ChildrensHospiceSouthWest #LittleHarbour Charity auction. model:www.printables.com/model/581579-castle-bahnholf-vase link to charity: www.chsw.org.uk/our-care/our-hospices/little-harbour #Charity #modernart #childrenshospicesouthwest #Eryone #3dprinting #wineholder #3dprintinguk #printables #dualextrusion #matte #plafilament
Just a few more Gravity bottle holders from @printablescom using @Eryone3d_official Dual Colour Rose red/Light blue Silk PLA. to be donated to the #ChildrensHospiceSputhWest #LittleHarbour Charity auction. model: www.printables.com/model/706358-curved-wine-bottle-holder link to charity: www.chsw.org.uk/our-care/our-hospices/little-harbour #Charity #childrenshospicesouthwest #Eryone #3dprinting #wineholder #3dprintinguk #printables #silkpla #dualextrusion
Super neat stuff! How the heck is this still the latest video of this thing after two months???
Maybe it's the product? hahah. But seriously, building printer/mod projects for me takes time though, If I'm building from scratch or modding. I think about everything before i build, it took me a year to build frank for example ( see Evolution of frank video series ) No lie though I've been considering putting this on frank and it's MUCH lighter weight than a stealth burner AND it would add the filament runout i wanted. and if i recall when I looked it up. The flow rate is even higher than the Triangle Labs Dragon it has now
@@CyBerJak still surprised there hasn't been a single review in the months that it's been out.
@@Litl_Skitl how to be fair this is because the printers I have do not already have easy mounts made for it. Because of that I have to think long and careful otherwise I end up with a printer down. I am working on an option though because I finally found one mount that might allow me to use it on Frank. It would give me a couple of benefits over the current tool head
@@CyBerJak yeah that's fair. My suprise was that no other channels made a vid on it in the meantime. Sorry for the confusion 😅
@@Litl_Skitl oh really I'm the only one? Surely that cannot be. I'm sure I saw at least one other if that's the case wow that's a first for me 😂 well I can definitely tell you as soon as I put the beast into action it will definitely get a video. Let's put it this way the current big printer ( Frank, if you've seen the videos for it) has a triangle labs dragon inside of a stealth burner. While this accommodates a very high flow rate if you look at the specifications for similar nozzle size 0.4 0.6 0.8 being the typical this all-in-one solution actually exceeds it by a little bit on the 0.4 but absolutely blows it out of the water on the larger nozzle sizes. This is something I would like to explore, And I have been contemplating just the way to do it hopefully and not have to change more than I have to
2 samples in 1 ! First here is the Dragon coin I printed using an 18g sample of #UzyFilaments True Red PLA and then... A Dragon Bust printed with #FantasyFilaments Transparent Orange Both samples were sent to me by @3D Filaments so a big thank you to them for letting me try these and share them The Uzy works great at 220c first layer with 200 other layers The Fantasy Filament 220c first layer but then I actually could do as low as 180c other layers with slower speeds. this print was 195c other layers at 80mm/s. I must admit even though drying continuously the transparent orange can get a little stringy if you have very short layer times larger prints will likely work better than tiny detailed ones which have a tendency to want to string as the nozzle will try and pick up a little. I'm pretty sure though there is a sweet spot where you can get away with points in a model as little as 1 mm but it's going to be lower temperature and slower speed most likely with a high travel speed. overall absolutely loved both. and depending on the lighting I have to admit the Transparent Orange actually looks golden or like golden orange which gives a really awesome effect. models: www.printables.com/model/714442-dragon-coin www.printables.com/model/115527-dragon-bust filament links 3dfilaments.co.uk/product/fantasy-filaments/ 3dfilaments.co.uk/product/uzy-pro-pla-filament/ #3DPrinting #uzyfilament #3dprinter #3dprintinguk #Uzy #3dfilamentsuk #fantasyfilaments #dragon #printables
Great job as always
Nice little test of #Uzy Pro PLA True Red filaments from 3D Filaments UK only 18g so had to scale to 60mm to fit but Yea worked great at 220c bed to start then 200-205 other layers Model available from: www.printables.com/model/714442-dragon-coin Filament available from : 3dfilaments.co.uk/product/uzy-pro-pla-filament/ #uzyfilaments #3dfilamentsuk #3dprintinguk #3dprinter #3dprinting #plafilament
Final Captain Jack Sparrow model and a shot of all 4 being sent to #LittleHarbour Children's Hospice in Cornwall, United Kingdom. I took great pleasure in printing these knowing this character is known for showing up in such hospitals all over brings some happiness to children that are under this type of care. I would like to personally thank each of the four artists that gave me permission to print these models to be donated to the auction that the charity is running. links to each of the models will be given at the bottom along with a link to the charity. materials used: @gratkit Black HSPLA, @Sunlu Official white HSPLA, @Anycubic Official white PLA links to models: www.printables.com/model/335686-jack-sparrow www.printables.com/model/632718-jack-sparrow-bust-fanart cults3d.com/:1549276 www.printables.com/model/819924-jack-sparrow-stencil www.crealitycloud.com/model-detail/6607d64d27545665e2d63586 link to charity: www.chsw.org.uk/our-care/our-hospices/little-harbour #3dprintinguk #3dprinter #highspeed3dprinting #highspeedpla #Captainjack #captainjacksparrow #johnnydepp #littleharbour #sunlu #anycubic #gratkit
Another great print of #CaptainJackSparrow to be donated to #LittleHarbour Children's Hospice. This time a tad larger with a lot more detail and printed with @Sunlu Official White High Speed PLA. at 300mm/s avg thank you to the model maker that gave permission for his model to be printed and given to this amazing charity. Model purchased from: www.crealitycloud.com/model-detail/6607d64d27545665e2d63586 Link to the charity: www.chsw.org.uk/our-care/our-hospices/little-harbour #3dprinter #3DPrinting #3dprintingforgood #childrenshospice #littleharbour #johnnydepp #captainjacksparrow #Captainjack #sunlu #highspeedpla #highspeed3dprinting
Another good video, keep 'em coming :)
Love the shirt mate :)
Yes my lovely wife got that for me. She knows me so well
@@CyBerJak then generally do, my GF got me one last year saying I'm Only Here For The Food :)
I printed this with some @Anycubic Official Whit PLA that I won not long ago in one of their giveaways. It is being donated to the charity #littleharbour who are a children's hospice charity in the South West of the United Kingdom. Anyone who knows the man behind this character, no exactly why it is was the best character to chose to be donated for an auction. so thank you to the artists that gave me permission to use their models for this purpose. Model links: www.printables.com/model/632718-jack-sparrow-bust-fanart cults3d.com/:1549276 Link to charity: www.chsw.org.uk/our-care/our-hospices/little-harbour #Captainjack #captainjacksparrow #johnnydepp #littleharbour #childrenshospice #3dprintingforgood #3DPrinting #anycubic #3dprinter
A very ambitious print for FDM , and the filament just i believe made it possible. so many tiny points of detail on this awesome model from printables. www.printables.com/model/93140-dragon-phoenix #3dprinting #3dprint #Conjure3D
Love the Vibrant Purple of this filament, Model download: www.printables.com/model/265878-guardian-angel
Model available from www.printables.com/model/392414-fenghuang-statue Love this model and the Green Black Silk PLA really highlighted it #3Dprinting #Conjure3D #3DPrinter #Printablescom
Model available from www.printables.com/model/290501-spyro-the-dragon-sculpt Very nice filament, printed smoothly and without problem. And you get that nice shading effect because it's dual colour co-extrusion.
Oh my GOD I want one!! That’s so CUTE!!
First of a few samples sent by @Conjure 3D for me to try out. Really like the way this tri colour Red Gold Blue Silk PLA mixes as it extrudes giving that awesome rainbow effect. it now sits above our Axolotl tank 😍 model is from Printables www.printables.com/model/218171-articulated-axolotl #rainboweffect #3dPrinting #articulated3dprint #axolotl #3dprint #chithusystems #theuk3dprintingcommunity #3dprintinguk @printablescom printablescom
Looks pretty good, except for the rear hinged lid, that wouldn't work for me. Great video mate.
Looks like a decent dryer. The rear loading may not work for all as you said. Fir me personally and my new system it won't work as the rear will be against a wall for close enough but over all it looks the biz.
That is a really cool trick :)
Firstly a massive shout out to @GratKit for donating some of the filament to this print. and to Lujie Chen. Creator of #luban3d this was a fun build and the largest I've done to date STL: split and then scaled www.thingiverse.com/thing:3606964 #GratKit #HSPLA #3dprinting #JackSkellington
www.printables.com/model/798733-rook-2020-mk2
Thank you for this unboxing. Interested to see how it works for you.
Yes I found it at least one adaptor that may allow me to use it on my custom printer. Otherwise I may have to build something from scratch again 😂
What’s been your experience with the spider v3?
Overall very positive. It has been the core central board for this build. I have found one comment from GitHub which may be correct as a few people including myself have found if you're a post controller is powered down and you turn on the rest of the printer suddenly your z-axis motors will start to turn or at least depending on where they're connected. Somebody suggested it was a loose connection at the bridge at the upper right hand side of the board that you have to put on if you're using a single voltage I tightened that and it seemed to do it less so I'm going to probably follow the same steps the other person did after considering whether or not I want to increase stepper motor voltages or not. But other than that it has been very good for the purpose. The fact that it has the onboard can bus controller Made it very easy when I decided to go ahead and utilise that with a stealth burner using the EBB 2209
@@CyBerJak Nice, I have two fystecs I’m building, one with 2.2, and the other with 2.3. I wanted the newest board and keep one as backup, but I couldn’t find any reviews on the v3 other than the documentation for it sucks.
@@erik3205 yes there have been some comments I've seen both in the Facebook group chat. And even comments on GitHub. I've been trying to fill in the gaps where I can for people if a person gets stuck. It's pretty straightforward though if one is using klipper. And it definitely would do good as a replacement for the two mentioned
Really good, fair video mate. I wouldn't worry too much about the "professional" look, if you've seen the state of my videos you'd already know that ;) I just call it a good 'un if I don't have to keep restarting because I've used swearwords :) What matters is whether the video contains the relevant information put across in a way that engages and this does that. Keep making videos on things that interest you and the audience will find it.
Stop showing me all these new toys, the misses is going to get mad when all these boxes show up
Yeah I say the same thing every time I go browsing
I like your setup. nice job
Thanks it does amazing print with many materials and more to come shortly