Видео

Thank you for the video. I was able to change both headlights, but the left side went out and the highbeams no longer work. I was told that it could be the leveling module which I’ve ordered, but I wanted to ask if anyone has experience with installation? Any help would be appreciated. Thank you.

This is the ONLY video I have seen that correctly addresses these bulbs and method of replacement. Thanks.

This was a great video for HID details. If you have a Jeep in the right year, I would also recommend this video: ruclips.net/video/gcSp_shzn3s/видео.html This guy doesn't have an HID, but the housing is all the same and coming in from the wheel well is easier than pulling out air filters, etc.

Insane how difficult they are making it to just change a bulb. Engineers constantly going backwards. But i also know they want you to come in and spend a ton of unnecessary money

Fantastic video! Dealerships want $495 just for bulbs and two hours of labor on top. Insane!

Right side is hell if you have a trackhawk. Just take it to a mechanic.

Best video out tgere .. straught to the point

차를 개 줮같이 만들어서 리이트 전구 하나 교환하는데 미쳐버릴거 같다. 이게 뭐냐 진짜. 개짜증나네 그랜드체로크

Thanks !! 😄

TY!!!!!

And so the blinkers in the same spot or does it have screws

Why do none of you mfs show the fucking connection removal

Amazing vid!!! This helped alot....the switch inside was why i couldnt get it out.

2014 GC Overland here, apparently these have HIDs as well, thank you so much for this video, best video online for sure🤝🏽

I made the conversion to LED on a 2013 grand cherokke, they light up fine but after 10 seconds they turn off completely, can you help me?

Thank You!! Great vid. My right headlight just died. With this tutorial I am going to change it myself instead of paying lots of money to the dealership.

Thank you, thank you the dealer wanted to charge me $450 to change his bulb. I search multiple videos and yours was the only one who told me about the tabs to move up and down on either side. I am a woman of 61 years old and I did it.

Thank you, you saved me a ton of pain. Tabs rotate and not the bulb.

Has anyone change the ballast mine burn out

Thanks man took me 20mins

$300.00 for a light bulb!

Do you need to disconnect the battery first?

Do you push both taps before taking out

Could never fully understand instructional videos when everything is done off camera 😢

Thanks this really helped, Yes the tab it turns about 1/4 turn up or down depending on side you feel it. You have to play with it a little as it might be a little tight. This tab is attached to the main light housing so it is just in front of the square housing on the bulb. It can be a little tricky getting the bulb back into the fixture. just have to line it up and play with it a little. Then it will seat and lock the tab once again. Saved alot of money for a little over an hour work.

Do you have to mess with the clips when putting in. ?

Very helpful thank you!

Spend most time installing aircleaner , there are these steel ribbons the case of the bulb goes in first , you have to position it perfectly to allow to insert and twist bulb . You should explain how to get the bulb line up perfectly .

Cant thank you enough for this .video. Helped me tremendously.

Great video , thanks for sharing

Very helpful tabs are very difficult to unbuckle. Had to make sure they were both secure on the top and bottom on both sides.

Absolutely the best video on the web. Thanks so much for tje part about releasing and installing the bulb !!!!!

Yup, did this myself with the help of this tutorial. Like others have said, those clips are a pain. In the end, apparently the HID D3S bulbs wasn't the culprit. I realized that the high beam "blue icon" on the dash didn't even come on so now I'm lost again. I checked all the fuses etc. but all seem ok. Anyone else out there had this issue with the high beam indicator not even coming on on the dash? Just happened absolutely sporadically and some items suggest the multi switch has gone bad but I don't even know where to start.

Thank you! that was the most thorough explanation of the tabs i've seen.

Thank you

It's so quick and easy, you weren't even able to do it on camera. Smh. It's not that quick nor easy. So how do you get the band back on, with the tabs.... ?

The description of the "tabs" that must be semi-rotated to release the bulb assembly is huge! Saved me from buying another set of bulbs thinking one was bad after the passenger side didn't originally reseat correctly. Thanks about a $100 or so! FYI: This applies to any of the Grand Cherokees of the WK2 ilk with OEM HID.

Anyone know where to find the turn signal and daytime light bulb? Or are they all the same bulb?

Thanks for the video. Helped me with my HID bulb replacement. On my 2014 Summit with Ecodiesel I had to remove two 10mm fasteners that hold the coolant reservoir in place. This allowed me to access the passenger side bulb. Still very tight, but enough room to get it done. I did not have to remove my ECU. My air filter housing was the same as yours. Thanks again.

The locking collars undo counterclockwise and do up clockwise - seems obvious I know, but in a car thats several years old the rotten things can be very stiff - and the headlight units are mirror image of each other so I ended up thinking maybe they lock/unlock accordingly - ie. one goes one way and the other goes the other way - but no, they both operate conventional way.

Great video. Helped a bunch but now my front turn signal doesn't work. Any ideas/suggestions how to replace that? Or does the entire lamp need to be replaced?

This was an EXCELLENT instructional video! You managed to hit every detail. Those tabs though, what a pain

Thank you for producing this video it was totally different doing one of these bulbs compared to other ones pull out and replace total time about one hour

NO NEED TO Disassemble Components , THERE IS ACCESS HOLE AT THE FRONT OF WHEEL WELL, YOU CAN REPLACE HID BULBS THRU THEM. Search RUclips for right video, there are some.

This explanation has been the most helpful. Thank you!

This is a terrible video😂 you show absolutely zero disassembly or even install to the passenger side. Here’s a video that shows you the tabs to remove the bulb: ruclips.net/video/4FsGWjznneU/видео.html

Thank you very much, you saved me a lot of time and money!! How you explain the tabs is great!!

One of my bulbs went out. I read recommendations that you should change both so I did. Now, both bulbs are on, but my headlights are really dim and "dispersed" is the best word I can use to describe. And they're not any better when I turn on my brights, maybe even worse. It appears that the deflector that focuses the light and switches from dims to brights isn't work. My headlights don't do the autoleveling when you first start up the jeep. HELP!! Does anyone know if/how to reset the deflector? I have AlfaOBD if there is a way to troubleshoot and/or reset. Thanks, Craig

I never would have figured out the tabs on my own. Glad I found this video before I damaged anything

For others that had trouble finding the “tabs” locking mechanism, they’re attached to the car, not ON the bulb- felt that was a little unclear from this explanation. They’re about 1/2-1 inch each in diameter, so pretty noticeable if you feel around. You can see them a bit in this video- spent about an hour trying to feel for them until I saw this - then got it out easy. Good luck! ruclips.net/video/GoD8RA1tme4/видео.html