Видео

Good idea! As an alternative to the zip ties, you might cut some 1-inch pieces of shrink wrap tubing and put it every six inches or so along the length of the cable.

Brilliant!

Perfect ! Thanks

did you ever put the zip ties on it?

outstanding thanks

Garmin won’t warranty the cables if you have to send it off to be fixed and they see zip ties marks on the transducer cable I found that out the hard way. I don’t know about Hummingbird. I used your system to mount live scope on my Ulterra. I have already spent nearly $5,000 on the trolling motor and a 106sv and I’m not spending $400 more just so I don’t cut the cable.Thanks for sharing.

I have what may be a dumb question, but how is that eyebolt secured to the housing? That hole is the access for the screws holding the side plate correct? I am not that mechanical, but other than that question this looks like an excellent solution. Thank you!

Thanks for your video. I was ready to remove the lift assist off my terrova and run my transducer down the slot in the shaft. I did a very close version of your idea and it works well.

I would like to see how you did the jam nut ordeal

I am having same issue

I set mine up the same way after watching this video. This man has it figured out. Minn Kota should be paying this person some money.

*I bought this model for my 14 ft Jon boat. **enjoyable.fishing** recommend love it!!! It pushes my boat with ease ( 2 men 220 each). I would highly recommend this to anyone.*

Wrap the bike cable/transducer cable around the TM leg.

I really like this I’m using this set up on my new Helix 7, but why not clamp the cable directly to the motor, eliminating the clip.

very nice video Thanks

What a mess. Guarantee thats a weed magnet. A couple zip ties and a length of 1/8 bungee is all you need.

Ive watched dozens of these videos and I have now found the way im going to do mine

I really like this set-up! I tweaked it by using a snap swivel on the motor end to get the swivel action.

1/4 or 1/2 size cable?

Great Idea. Thank You

He doesn't fish the slop with that rig

Where did you get that bicycle cord at

No doubt will work well in clean water. Here in Florida fishing grass and weeds not so good.

Thank you for sharing this information. With a little tweaking of my own, this idea works great!!!

Protect the harvest is a great organization also.

Excellent thanks it’s really stupid they made them that way. I have the same problem with a ix3 motor Guide. 👍🏼👍🏼👍🏼

*This little guy sure does get going!¬¬¬>**allmy.tips/MinnKotaUlterra?19s** We are extremely happy with this purchase. Easy to assemble, and take off. We went down the river with no problems.*

This set up worked perfect thanks for the idea! And yes he had the transducer cord on the wrong side, if u put the cord over the head of the trolling motor and zip tie u are set! 6 ft cable works well! Amazon has some cables

Where did you buy your bike cable

what do you do with the integral 2D universal sonar cable that is pre-installed?

Looks like you could have a cable pinch problem when the unit is stowed. Maybe move the 'ducer cable to the other side of the motor, on top when stored. Otherwise, a very interesting solution.

I ended up buying a air hose line from Harbor Freight and using small zip ties to connect the TD cable to it. I inserted 1/4 in shank eye screws into both ends of the air hose and also connected those with small carabiners. Thanks again for the great video.

Also there is no adapter cable from Hummingbird or Lowrance because the DSI combined power and TD in one connection.

Thanks for the ideas. I just had a Terrova with lift assist installed and bought a new Lowrance Elite 7 Ti. I wanted to use my older Lowrance Elite 5 DSI on the Terrova and while most people are wanting side scan I only cared about downscan but did not want to buy a hummingbird. Unfortunately the DSI has power and transducer cable connected together so I cannot run cable through an air hose or the hose that comes with the precision works product ($130). Your solution is perfect for me. The only question I have is how you mounted the eyebolt. Did it replace the screw that I see in my Terrova mount?

Sure would like to know more about the change your made with the cable mounting point. I'd like to do this to mine, but the change you made would be very helpful to know. Could you post another video or photo? Thanks

I'm trying to get my dad set up with a hummingbird helix 7 and a Minn kota Ulterra on his tritoon and need some help. Why would you want to mount the helix transducer to the trolling motor? Do you use a separate transducer on the stern for your other helix at the console? With the trolling motor transducer, would that always be turning your image based on which way the trolling motor is pointing? I hope someone can help me clear this up. Thanks

Check with precision sonar they make mounts just for this type of motors I have one on my powerdrive works great

How long is your bike cord. They make many different lengths?

I'm lost I thought there was a transducer on the motor under the unit in that flat area? What transducer did you mount on the core as you called it or motor.. That I bolt hasn'tworked out yet Looks bent

Nice idea but wanted to ask what is wrong with using the 2D in the Ulterra? isn't that a down image transducer built into the motor assembly. Thanks

Hi all. The system is still working great. I have had no problems to date.

Thanks for sharing. I really like your solution. I see a couple mods I'll make for my install, but your solution will be the basis for mine. I have viewed quiet a few different install solutions and none of them look as good as this one.

Love it. Can I ask you where you purchased the bike cable?

Dude, that looks like right idea to me. I own a Power Drive, but still have the same issues when it's deployed or stowed. I think the Eye Bolt is an improvement over my idea of using self sticking round coax cable clips on the bow (mounted near the base of the TM). Did you secure the cable at the base of the shaft? The bicycle lock cable use is interesting as well. It almost mirrors the electric steer power cable on the Power Drive.

Looks like it would work well for open water. I was just be worried about getting it hung on something (tree) underwater and rip my transducer or finder off the boat.

Thank you for sharing. Are you still happy with the set up? Is there a picture of the move you made with the Eyebolt? Any other suggestions?? Thank you.

Is this still working well?