![ACRO PILOT](/img/default-banner.jpg)
- Видео 97
- Просмотров 35 704
ACRO PILOT
Великобритания
Добавлен 15 фев 2013
RC wings and FPV
ATOMRC DOLPHIN - LOST ENGINE MID AIR
ESC thermal shutdown due to oversized propeller
Просмотров: 1 926
Видео
ATOMRC DOLPHIN 6S - CADDX VISTA & RUNCAM THUMB PRO
Просмотров 6042 месяца назад
ATOMRC DOLPHIN 6S - CADDX VISTA & RUNCAM THUMB PRO
ATOMRC DOLPHIN 7km Flight with Caddx Vista
Просмотров 3762 месяца назад
ATOMRC DOLPHIN 7km Flight with Caddx Vista
ATOMRC DOLPHIN 6S - RUNCAM PRO - GYROFLOW
Просмотров 2113 месяца назад
ATOMRC DOLPHIN 6S - RUNCAM PRO - GYROFLOW
Comparing Dolphin and ArwingPro with GoPro 7
Просмотров 1704 месяца назад
Comparing Dolphin and ArwingPro with GoPro 7
Loose the music
hey i need some help with this plane can you please help me?
I would try to help you as much as I could. You could also try to join the Inav Fixed Wing group in Facebook
Hi man! I've just set up my Dolphin and now have concerns regarding prop, how to avoid this situation? how to correctly chose prop for your motor?
First I would check what the motor is recommending. Next thing would be to perform a bench test, pay attention to cut your fingers, force constant throttle around 80% and check OSD how many amps and voltage is drawing. Next try it on the field, do not go to far and check it you manage to flight the wing at high throttles without damaging your lipo lion.
Great video man. I had this happen to me last week except I totally smoked my motor at high speed and it’s not I nice feeling coming in dead stick. Great job with the landing, superb piloting skills. Keep the videos coming……Rotorflex👍
I've been flying for a while and this is the first time I experienced this situation. My main concern was to keep the wing on a good angle of attack and avoid stalling. Turning at that altitude was not the best idea but I handle to put the wing away from the wet land.
👌 relax total
Nice flights. I also fly near the east coast but down towards Lincolnshire 👍 #dolphinday
Круто летает. Если не сложно сможете скинуть свои pid настройки?
I would suggest you to perform Autotune on your wing to get your rates. All dolphins are different in function of your components and mechanical setup
@@acropilot5693 Ну все же было бы круто что бы можно было оттолкнуться от чего то.
❤❤❤
Acro pilot, you are my new hero !!
That tall grass sure helps with the heavy ones! Is that a 6x6 folder? I just picked one up off eBay, tried it for two packs on my VAS Wyvern and went back to a 7x5.5 fixed. How did you like the folder?
that is a 9x4e blade (no folding). I am currently testing an 8''
Outstanding work there, also subbed. Thanks for sharing!
Great video. What's your setup?
MOTOR SUNNYSKY 2212 1400kv PROPELLER GEMFAN 9X5 FOLDABLE WITH MAYATECH ESC 40a BLHELI (ARIA) SERVOS PTK9497 MGD RXTX TBS CROSSFIRE NANO SE VTX CADDX VISTA FC MATEK F405 WING BATTERY 4S LION FRONT CAM GOPRO HERO 7 OPTIONAL RUNCAM THUMB PRO INAV 6.1 AUTOTRIM AUTOTUNE AUTOLAUNCH
I love my mini se it's not 4k but it's my workhorse. Great video..✌️
yo, totall useful - I'll be back. Acro,
amazing setup.could you share pid settings please?
I have added my PID values on the description. Please pay attention on copying them. As written those are very high Ps that my servos can manage to handle as well as my wing customazation.
Hmmm, I don’t see any dead birds :)
That HUD is fucking badass.
Out of curiosity, why does the compass keep showing north, even when you turned around? Edit: Perhaps it’s not showing the heading of the plane? I just noticed that it changed once you flew overhead? It seems odd behaviour!
Around 4.4 Km I lost OSD telemetry (bug) that is why I turned back home.
Nice! That is how its should fly on 6S and full throttle
Hey nice flight for a plane at 1250g. I started subbing. Looking to see more flights...
Great plane from atom rc…. But their order management/customer service is terrible. I tried over 2 months to get my order right. They asked for the same pictures 3 times. The pictures were in their emails asking for pictures.(all they had to do is scroll down). They just wanted me to give up. They have one contact for the whole company. I did give up , never got a refund either. Super shady business.
They're a fantastic plane hey! Like your camera angle but can't see how you mount it beneath without damaging it on landing?? Lovely spot too. Looks like Oz ??
I will added on the next video. I use small lateral foams and I try to land on tall grass
Awesome flights again. Wondering.... do you have a rudder on your dolphin? Ie yaw control?
Thanks. No I don’t.
WoW! Wonderful video.
😍😍😍👌👌👍
For 6S, what's your iNav launch throttle?
looks like on the osd idle is 20% and launch is 50%
Iddle Th = 1200 Launch Th = 1500 Climb Angle = 25
Did i change electronics to use 6s?
yes, you will need to select an ESC - Motor - Propeller combo for an specific design.
Qué pasó?😢😢😢
Nice. But maybe more interesting if you'd have been 5ft off the deck or sea for the first couple of Km's on the way out and back. I find that with good LOS, you can easily go 2+ Km while skimming the deck or sea in this case with DJI.
Thanks for the tip
Is it possible to use a go pro hero 11? Or just go pro 5s - 7s?
I have the GoPro 7 without need to ballast on the back. Any other heavier might require extra weight on the back to CG
Nice setup and interesting location to fly in. What's the distance to those offshore wind turbines out there? Can this 6s Dolphin make it out there for a few aerial orbit shots of them perhaps? That would make for some awesome footage. You can fly low over the waves to get there too. 😄
They are exactly 3Km away and my video setup range is around 4km. Batteries and engine set up can easily go there. I've been several times but have not dare to fly low at that distance surrounded by turbines :)
@@acropilot5693 True. But imagine if you pulled it off? That flight would become FPV legend!
The flying location I envy ! 🥺 you bastard ! lol
Full throttle is not corrected. You shouldn't ever need full throttle with this model. It also appears that you are stick slamming with no Expo added to your controls. Pusher airplanes like a little tail weight, and a upward motor position to keep the nose up with very little thrust.
Can you put your build in the description please? Thanks.
MOTOR SUNNYSKY 2212 1400kv PROPELLER GEMFAN 9X5 FOLDABLE WITH MAYATECH ESC 40a BLHELI (ARIA) SERVOS PTK9497 MGD RXTX TBS CROSSFIRE NANO SE VTX CADDX VISTA FC MATEK F405 WING BATTERY 4S LION FRONT CAM GOPRO HERO 7 OPTIONAL RUNCAM THUMB PRO INAV 6.1 AUTOTRIM AUTOTUNE MANUAL PID EDITS AUTOLAUNCH MAIN FLYIGN MODE : ACRO
@@acropilot5693 Thank you so much for the details. Will try this build soon as I can get my parts. Cheers!
If it doesn’t glide without power after you toss it, Then it’s no Bueno.
Agree, this was my first plane, just managed to learn some basics.
It's a great flight😊 The GyroFollow video is also great❤
Thx, this is my first trial on Gyroflow... great to learn new tricks
Bellissimo
It’s a beautiful scenery😊
Дифра-дно. Игрушки для буржуев и недолюдей зомби
Is that launch with Auto Lanuch or manual?
Hand launch on acro
I do not want to buy a Wing I do not want to buy a Wing I do not want to buy a Wing I f*cking want to buy a Wing
Awesome 👍
Nice! Looking to build one. What's your specs? I was going to use a leftover 2806.5 1300kv on 6s with 7" prop...
Seems a good set up. This one is; 2207 FIVE 33 MOTOR 1960 kv GEMFAN 5152 50 amp ESC BLHELI 32
@@acropilot5693 What are the recommended throw/endpoint settings? I can't find them anywhere. What do you think would be a good expo rate for a beginner?
I have around 10mm throws and 30% expo for both. If you are beginner I would recommend you to set them around 7 mm. For the maiden I would recommend you to add 1mm reflex. CG on this wing is spot on on the marks but you can always forward them about 1-2mm from the centre marks to be a bit nose heavy. This is not a beginner wing because it has a long nose easy to break but if you want to go ahead try to make it as light as possible (4s small lion pack) and reinforce behind the nose and use the flat nose.
@@acropilot5693 I fly fpv quads very well already and have tried sim for wings. Seems waaaaaaaaaayyyyyy easier than quads.
Yes they are once you learn how to avoid stalls and well trim a wing. Try to practice on a sim with varying wind conditions. Happy flights.
The good old Dolphin, steady as a rock. Great video thanks. Any reason for the Cadx instead of the 03 air unit? I'm on my 3rd Dolphin and 1st Penguin. Happy flying.....naturally 😊
Maybe the only thing that restrain me to buy the 03 air unit is the Inav OSD elements display.
Wow.....quite interesting 😊😊. Thanks for sharing.
Glad you enjoyed it
Amazing that both surroundings and the aeroplane are in focus. Nice flight!
Thanx for sharing! Same weather conditions? Also stabilisation in the GoPro disabled I guess? Dolphin seems way more stable! What's your thoughts?
I think I add on the description but I will give you some extra insights. All electronics swap and GoPro swap from Arwing Pro to Dolphin, same FC, same servos, (Arwing Pro linkage are stronger but I reinforced the elevons as much as I could), similar auto tune and auto trim strategy (Inav), similar PIDs tuning strategy. Similar weather conditions but not the same, stabilisation in the GoPro is enabled for both. Dolphin is much more stable both in pitch and roll. Check my latest video (steady flight with raw caddx vista - GoPro failed to record)
@@acropilot5693 wow impressive! Will definitely check it out. I'm building my dolphin too these days and will be getting in the air hopefully soon! Thanks for the reply.
What Goggles and what VTX ?
DJI V2 with Caddx Vista
@@acropilot5693 WTFOS firmware ?
yes
@@acropilot5693 Nice!
Wow that amazing
glad you like it
Spectacular views! How's the wind?
As usual but it has its advantages for soft landings